Parts Needed to Install Transmission Cooler # D13311 in a 2011 Jeep Liberty

Question

Question:

Will this fit 2011 jeep liberty with3.7l without extra adapters

asked by: David H

0

Expert Reply:

You would need the AN fitting adapters part # D98200 for each end of the cooler and then the clamps part # D13008 for securing the hose to the line, and for hose part # D13016. Most likely you will also need the insta-dapt fitting part # D13004 as well.

expert reply by: Jameson C

0

Answer 1

The Flex-a-lite Transmission Cooler #FLX400008 does not have a class rating. It is a smaller cooler at only 11" wide x 3-5/32" tall x 3/4" deep. The larger Derale Series 7000 Tube-Fin Cooler #D13311 is 13-1/2" wide x 5-1/8"…

view full answer...

Answer 2

Derale transmission coolers like Series 7000 Tube-Fin Cooler #D13311 are USA-made. This particular cooler is a Class I-rated unit intended for subcompact cars. We offer similar Derale coolers, again USA-made products, that are designed for your 1994…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jason, whenever available I would recommend going with the channel attachment for roof rack accessories including the Thule Hullavator part #TH898 as its simpler stronger, and it's basically the future of most roof rack accessories as it…

view full answer...

Answer 6

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Answer 7

Yes, the perfect solution for you is the B&W Tow & Stow 2-Ball Mount #BWTS20066BMP, which is specifically designed to work with the GM MultiPro Tailgate. As you can see int the attached photo, the angled design provides clearance for the…

view full answer...

Answer 8

Thank you for the photos and sorry to hear about your truck! The unique design of the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate #BWTS20066BMP is that angled section that meets with the shank part of the ball mount. On…

view full answer...

Answer 9

Yes, absolutely we have what we think is the right ball mount. It is the B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate, #BWTS20066BMP and currently has a 4.9 rating from users. When you're not towing, you can flip the…

view full answer...

Answer 10

I have just what you need. The most popular transmission cooler for the 2015 Toyota 4Runner is Derale cooler #D13503. This cooler measures 11 inches wide, 8-3/4 inches tall, and 7/8 inches deep. It will increase the cooling capacity beyond what the…

view full answer...

Answer 11

Hey Bryan, Thanks for the photo and specific info you gave, and if you're sagging to the point that it's affecting oncoming drivers you definitely need suspension enhancement. That much sag is actually going to affect your 4Runner as well…

view full answer...

Answer 12

We do have all of the parts you're going to need, so never fear! For a hitch I recommend using the etrailer #e98863, which has a nice, durable powder coating that will hold up to the rigors of towing. This is a custom fit hitch so there's no…

view full answer...

Parts Needed to Install Transmission Cooler # D13311 in a 2011 Jeep Liberty

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching