To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The Demco Recon is built to handle serious towing with a gross towing weight of 21,000 lbs and a vertical load limit of 4,000 lbs. The solid steel construction and rust-resistant black powder coat finish give it the strength and durability needed for hauling large fifth wheels over long distances. It’s a hitch that feels solid on the road and stays that way under load.
The wraparound, single-piece jaw completely surrounds the king pin for 360-degree contact, creating a tight, secure connection. A 3/4" thick solid steel locking bar reinforces that connection and automatically locks when the jaw closes. This setup cuts down on rattle and unwanted movement so you get a quieter, more confident tow every time you pull out.
The double-pivot hitch head moves both front to back and side to side, helping the trailer track smoothly behind you even over uneven roads. Polyurethane dampeners built into the head assembly absorb shock and reduce towing noise. That cushioning makes a big difference on long trips where less jarring means less fatigue for you and less stress on your trailer.
Installation is simple because this hitch breaks down into two lightweight pieces. The head slides easily into the base and secures with an included pin, so one person can handle setup or removal without extra equipment. Three height settings—15-1/2", 17-1/4", and 18"—let you dial in the perfect level ride for your trailer while keeping bed rail clearance where it needs to be.
The spring-loaded handle has a comfort grip that makes coupling simple. When it’s time to secure or release, just pull the handle and use the tethered safety pin to lock it in place—open or closed. It’s quick, clear, and reliable, especially when you’re hitching solo or setting up at the end of a long day on the road.
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, Steven here with etrailer.com. Today we're gonna be taking a look at these Demco Premier Series custom mounting brackets for your fifth wheel above-bed base rails. Now these installation brackets do mount beneath the truck bed to provide you attachment points for your fifth wheel rails. Now those base rails that you're gonna need are sold separately. There's a picture of 'em up there in the corner. That part number is DM6071.
Again, that is sold separately. Just want to kind of show you what that's gonna look like. Now those will sit in the bed of your truck, and they will allow the installation of your fifth wheel trailer hitch. Now the custom brackets here that you're gonna get in all the hardware you see and the instructions, the fish wire here and your blue lock type, everything you see here is gonna come included. It is made here in the USA.
It's a very, very nice finish. It's got a five-year limited warranty. It's got a very nice, sturdy black powder coat. Let me pull one of these off here so I can show you kind of a side angle. So very, very well made, very strong, heavy duty.
They're gonna fit your application. Again, you want to utilize our etrailer.com fit guide. You'll type in your year, make, and model, and that'll help you select the right part for your specific vehicle. Now these, again, are custom made, so they will mount to existing holes in your vehicle's frame, and that should minimize most, if not all, the drilling. And again, it's gonna help reduce the installation time as well.
Now, again, because they're custom, it's also gonna avoid known obstacles along your truck frame. So, again, pretty simple install. Just take your time. There's not many parts here. And that's gonna do it today for our look at these Demco Premier custom mounting brackets for your fifth wheel above-bed base rails. I'm Steven with etrailer.com. Thanks for looking.
Ratings & Reviews
very good product although when unhitching rv it wants to trip the latch. I had to address that problem by drilling a hole in the trip bar for the pin to hold it open.
It was a SOB! getting it installed, welding process warped feet and did not just fit into place as expected. It took some coaxing with a nine pounder on the feet tabs to fit my rails, luckily mild carbon steel is workable, however it did upset the finish. A QA check needs to be done on final dimensions prior to powder coating!
Ed
10/12/2022
Worked great. However after being shocked by high fuel prices and a couple of trips we sold 5th wheel and down sized to a TT, You want to buy a slightly used Demco Hitch?
The hitch arrived in four days was easy to install in truck not too heavy for a 70 year old man hooks up easy and I really like the double locking jaw the only issue I had was the wedge for my sidewinder the bolt holes did not line up took me about an hour making holes longer to be able to bolt up
love the three piece set-up of these hitches...makes them light weight and easy to handle...also when not in use there is a topper on my truck and the covertability of the hitch allows me to use my bed platform without removing the hitch...just remove two pins and back off the lock bolt and its low enough to use the two tier stacking feature of most trucks
product delivered on time and as described. This hitch is easy to move in and out of the bed of my truck with it being able to come apart. Thanks.
Randy
3/21/2019
I really liked the hitch as it was light and easy to use. I have purchased a new truck and needed a slider as it is a short bed. I purchased the rail kit from etrailer and as always it a superior product.
Seems to be a well built hitch and the 3 piece design is VERY nice in the load/unload space. Why this received 3 stars is that it was missing parts and the base was beat up badly (cosmetic) when received. Missing parts included the pins to connect the base to the rails and the pin to connect the neck to the base. Not usable at this point. Etrailer is sending out the parts, and I'll contact Demco for new stickers. Will update review and photos once I have used it.
Hitch came in two boxes UPS. The head was stapled and secured in one box. The base and upright piece came, not in a box, but rolled up in cardboard and taped up with clear packing tape. I put it together so I could hook up and set the height and there is no hitch pin and lynch pin. I don’t know if it was rolled up in the cardboard and lost in shipping or wasn’t packed at all. I also didn’t get the instruction manual and had to go to Demcos website for it. The base and upright being rolled up together banged up the base or it was used and returned and that is why it was rolled up and not in a box. Now I have a hitch that I can’t use because I didn’t get all the parts. Called etrailer for the hitch pin and lynch pin and don’t know when it’ll arrive because it’s not an etrailer part. I can’t review the hitch because as of yet I can’t use it.
Well it came in two pieces the head and the base not a big deal but they came A WEEK apart when I paid for expedited shipping. They tried to blame it on ups but I looked at the second tracking order after the first boxes arrived and it says the label had been made but not at ups so it shipped far after the other boxes. Then when I took the 5th wheel had out of the box the bolt that holds the handle on had a smaller size nut so you can’t even assemble the head. I went here hoping to get the stuff I needed for my 5th in a timely matter but got the opposite… not saying I will not order from here again but I will definitely think twice before I do.
Excellent product and customer service was outstanding. I just bought the product so I haven’t towed with it yet but after many many years of towing with other fifth wheel hitches, I can tell this is going to be an huge improvement!
First shipment had a problem, the box with the base was ok. The box with the hitch head was empty except the release handle. Etrailer promptly sent out a second box with the hitch head that arrived intact. Etrailer had me send some pictures of the damaged first box and then handled the problem with UPS completely on their own. Prompt service to resolve the problem is highly commendable.
Product arrived on time, correct and in perfect condition.
The only issue I am having with the fifth wheel hitch is latch handle will not stay open (out) when hooking up or disconnecting from king Pin sometimes (and yes, I know how to work a fifth wheel hitch). If it wasn't for that I would give it 5 stars.
Haven't used it yet but it's unlikely to be anything but 5 stars. I'll update review if so. The hitch came in 2 boxes. The head was packages in a HD box. The box that the base came in was battered pretty bad. But, no marks in the base. All hardware arrived. Took about 15 minutes to assemble and get set up.
Robert
3/1/2020
I am very happy with this hitch. Easy to hitch. Rock solid connection. Easy to disassemble to be removed. Great buy.
This was an upgrade from the dealer installed hitch. Best purchase since I didn't know how much longer the old hitch would last. After purchase, I was at the dealership and saw they were now selling the same hitch. Solid and rattle free.
Jane S.
4/9/2021
Excellent
The product arrived as scheduled and all the parts and pieces were in the two boxes. It installed quickly in my pickup and I hooked it to the fifth wheel and moved it forward and back. Seems to work well, takes all the slop out of the hitch. The hitch seems to be well constructed and the double latch is what I was looking for.
Jess A.
7/20/2018
I love the hitch it is possitive locking and there is no movement when it is latched around the pin
works every time has never failed, replaced a curt 20k that i used for 10 years,lots of times it wouldnt click and lock .easy to use no chucking.very happy with this hitch.3 years ago i installed air lift air bags ,love them too!!etrailer is a great place to buy from
Robert K.
11/12/2020
real well,hooks up easily,the bolt that snugs up hitch head broke in half,called denco and had a new one in 4 days.very satisfied with hitch
Looks great nice workmanship. Easy to install.
Packaging on large components should be changed??? Need custom molded styrofoam to slide on two sieds and hold product in shipping box. Will include pictures of delivered packages
This is a really nice hitch for the money. Extremely easy to installl for one person. I can’t wait to pull my camper with it. The only problem I had was how badly damaged the package was when delivered. Fortunately the hitch was not damaged. The picture shows how it was when I got it.
Ordered hitch late Wednesday evening and received early afternoon on Friday, that is super fast delivery. Two cartons received with no damage and all parts were there as expected. It looks exactly as advertised online and it was at a great price. AND FREE SHIPPING.
Also made in the USA.
I am replacing my Demco Hi Jacker Auto Slider that weighs approximately 300 lbs with the Demco Recon that according to the shipping labels weighs 91 lbs. It will be installed on a Ford F150 with 5 1/2 ft bed and fiver with a Lippert Turning Point Pin box.
Rugged product, easy to install, quick latch system. easy to remove. Purchased the Reese adapter with this hitch, and installation was easy. Some minor adjustments with the cam over lugs, and setting the hitch posts into the adapter. Overall very easy set up. Looks good, and can be taken apart in pieces, for ease of removal and installation, after set up. Ordering was simple and all parts came in about a week.
Parts arrived for the DM 8550043, received only the hitch base plate and adjustable shaft for the hitch head. Have been told that the hitch head is shipped separately. Now have a problem with the hitch plate fitting the bed rails. The holes for the pin that secures the hitch plate to the rails are to close to the bottom of the hitch plate photos are given of the problem a pencil was used for reference. There is NO WAY the pin will go through the rail and hitch plate. Waiting on a solution from etrailer. The hole that you can barely see the pencil is tailgate rails pin fits fine.
This hitch with the Airbourne Sidewinder worked great with the 2018 Ram 2500 Mega cab short bed with Ram boxes. Can maneuver a 90 degree turn without issue. Still have to get trailer lifted higher to get the trailer nose lowered, but for the complicated research we had on the right combo, this is tested and verified
Already pulled the rv with it. I like the design. Literally ripped open the box and put it together in a matter of minutes. The three pieces come apart fast lightening it up to remove it from the bed
Jeremiah
9/9/2025
Looks good works good, pull a triple axle Roy hauler rv. No complaints
I had a Demco Recon 5th Wheel Hitch in the past I liked how easy it was to operate and the get in and out of the truck bed. I also like how compacted it is compared to most of the other brands. Go with what you know works for you.
The truck that got the install is a 2002 Ford F350 Super Duty 7.3 L Diesel dually. The Demco Recon 5th wheel hitch (DM8550043) looks like a well made, heavy duty hitch. All the welds are precise and well done. I like the single wrap around jaw with the real thick bar that backs that up. The handle that pulls out to unlock the jaw moves with ease and locks in the out position when the jaw opens. When the king pin comes in contact with the back of jaw, the jaw wraps around the king pin, the handle closes, you put in the safety pin and your ready to go RVing. I chose the Husky Custom Rails and installation kit (HT31405-686) for my install. The reason I chose these rails over the ones that etrailer had matched up for the hitch is, I had previously installed a set of Airlift Airbags and I didn't want the rail install to interfere with the airbags. It was a good choice, there was no interference at all. If I had not had the bags, I would have chose the rails and install kit that require no drilling. Drilling the holes went very fast and easy, it was torking the rear bolts down that was very difficult. There was not enough room to get a wrench of any kind around the nut. I wound up using a set of vise grips on the nut while a friend of mine torked the bolt slowly from above.
All and all I'm happy with the product and I'll give another review in a year.
Harvey
3/3/2020
This Demco 21K fifth wheel hitch is a great piece of equipment. I have pulled my 40 Heartland Bighorn fifth wheel as far north and west as Wisconsin and south and east as Florida. It has performed like I thought it should and beyond. I am sure glad that I chose the Recon over any of the more expensive brands. Its a real performer and it looks pretty cool too!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Jenny N.
10/19/2021
The Recon is designed to work with industry standard rails however we have seen rails that were not installed correctly in the bed or shifted so that it is throwing off the hole positioning as the rails are independent of each other. I would recommend measuring the rails to ensure that the front to back measurement is 29 inches and the side to side measurement is 22 inches.