What Harness is Needed to Install a Trailer Brake Controller on a 2022 GMC Canyon

Question

Question:

Curt 51170 install on 2022 GMC Canyon? Canyon has towing option and trailering option, But NO brake controller. What extra harness do I need? Any instructions of 51170 being installed on Canyon?

asked by: Steven D

0

Expert Reply:

I do have an option for you but hardwired trailer brake controllers aren't ideal for a 2022 GMC Canyon as they will require you to splice into the vehicle and run wires throughout. I highly recommend going with the Curt Echo Wireless Trailer Brake Controller part # C51180 instead since it just plugs into the trailer connector and you're done. I did a review on this if you'd like to check it out below.

expert reply by: Conner L

0

Answer 1

Hey Greg, thanks for reaching out. So we do offer a few other 9/16" - 18 wheel studs that will be of sufficient length. The spline diameter of our studs is 0.689" though. We have nothing in that size with a 0.617" spline diameter or…

view full answer...

Answer 2

Hi Joe! I do have a hitch option for your 2021 Q3 S-Line, but the Draw-Tite DT62GR isn't going to fit properly, unfortunately. I am not 100% sure what it is about the S-Line that changes the fit, but it definitely makes things a little more…

view full answer...

Answer 3

It sounds like either the Dexter DX7.5L A-60 Brake Actuator for Disc #DX56FR or Drum #DX83FR brakes is going to be the best replacement option. According to the information I could find from ShoreLandr your trailer does use a 3" wide by 5"…

view full answer...

Answer 4

We have quite a few brake controllers that will work with your 2023 Chevrolet Colorado Trail Boss. The best brake controller for a 2023 Chevrolet Colorado Trail Boss is the Redarc Tow-Pro Elite item #RED44FR. This is a proportional brake controller…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 7

Hey Katja, the Curt Echo Mobile brake controller part #C51180 would be your best option. This is a wireless brake controller and all it requires is a 7-way with the taillight functions and the 12 volt accessory circuit active and you'd be set. So…

view full answer...

Answer 8

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…

view full answer...

Answer 9

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

view full answer...

Answer 10

Hello Jack, Yes, you can absolutely lock it to the pedestal. If you are going with the Watchdog Power Center Surge Protector and Voltage Booster - Bluetooth and WiFi - 30 Amp #HU84ZR, I would use our etrailer Cable Lock - 10' Long - 5/16"…

view full answer...

Answer 11

Hey Matthew. No one makes a custom fit gooseneck hitch for a Silverado 5500 but we do have a couple of options depending on how your truck is setup. If you have a flatbed truck or one with a regular bed, you can use the B&W Turnoverball Underbed…

view full answer...

What Harness is Needed to Install a Trailer Brake Controller on a 2022 GMC Canyon

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching