Parts Needed To Convert 1998 Nitro Boat Trailer from Hydraulic Drum Brakes To Hydraulic Disc Brakes
Published 04/20/2022
Products Featured in This Question
Question:
I am looking for options on updating/upgrading the brakes on my 98 Nitro boat trailer. I am not sure what disc conversion kits would work. I know the axle is 3500# UFP Axle EZ Loader 44649 /68149 Boat 2.33 Seal as I have put new bearings in before. Thanks
asked by: Nicholas P
Expert Reply:
For your 1998 Nitro Boat trailer I recommend using the Kodiak Disc Brake Kit # K2R35S. This kit contains stainless steel rotors, calipers, mounting brackets and bolts. When paired with the Kodiak Trailer Hub # KH84545S that is also stainless steel you will not have to deal with the corrosion you are likely having to deal with. For the hub you will need the Inner Bearing # L68149, Outer Bearing # L44649 and Grease Seal # 168255TB. This grease seal has the same inner diameter of 1.68" as the Seal # 010-180-00 that you used with your previous hub and will fit the new stainless steel hub.
You will need to change out your surge actuator for one rated for disc brakes like the Demco Hydraulic Brake Actuator w/ Electric Lockout # DM62VR. The electric lockout will allow you to reverse the trailer without the brakes locking up. A 5-Way Harness # 20017 is needed for the electric lockout if your trailer does not already have a 5-way connection.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Demco Hydraulic Trailer Brakes - Uni-Servo - Galvanized - 10" - Left/Right - 3.5K
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Drum Brake Replacement Assemblies for Use with Titan Actuator
- Q&A: Rotor Size of Kodiak Disc Brake Kit for 3,500 lb Axles
- Search Results: 4000 lb axle
- Q&A: Replacement Hubs for a 1998 Tracker TrailStar Boat Trailer
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Search Results: timken l44649
- Search Results: 473317
- Search Results: ad2527e grease seal
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Shop: Mounting Bolts and Hardware for 10" Brake Assemblies
- Search Results: 2565~grease~seal
- Shop: Dexter Trailer Hub and Drum Assembly for 4,000-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and Stainless Steel - 3,500 lbs
- Q&A: What is the Thickness of the Redline Grease Seal # 168233
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Q&A: Replacement Boat Trailer Seal for AD2527
- Q&A: Recommended Replacement For Napa Trailer Grease Seal 16667
- Shop: Trailer Hitch
- Search Results: trailer brakes
- Article: Trailer Wiring Diagrams
- Search Results: brake actuator
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Wiring
- Video: All About the Demco Hydraulic Brake Actuator-DM72VR
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Brakes
