Replacement Hubs for a 1998 Tracker TrailStar Boat Trailer
Updated 05/18/2021 | Published 05/15/2021
Products Featured in This Question
Question:
Hello, I have a 1998 Tracker TrailStar Boat trailer. Im looking to replace the hubs. What I know and was able to figure out: Wheel: 13 Bolt Pattern: 5 on 4 1/2 GVWR: 2700lbs Outer Bearing: L44649 Couldnt get the inner out Spindle: Tapered Has zerk fitting on outside in bearing buddy Hub Flange: 6 1/2 Can you please recommend the correct hubs? I think I know which ones I need, but Id like to be certain! Thank you!
asked by: Doug
Expert Reply:
With a 5 1/2 bolt pattern and the outer bearing being an # L44649, you most likely have Dexter's #84 Spindle. This uses the # L44649 (1.063 inner diameter) outer bearing and the # L68149 (1.378 inner diameter) as the inner bearing. This is one of the most common spindles out there, but it wouldn't hurt to verify your inner bearing's inner diameter just to make sure.
If all that matches, the etrailer.com Trailer Idler Hub Assembly for E-Z Lube Axles # AKIHUB-545-35-G-EZ-K will be a great option for your boat trailer. This has a galvanized finish to prevent corrosion and a rubber plug in the grease cap for easy access to the zerk fitting on the end of the spindle.
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Marine Grade
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Threaded - Galvanized
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Search Results: 16" wheel
- Search Results: hd84546bx
- Search Results: trailer leaf springs
- Search Results: rim
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Shop: Dexstar Steel Spoke Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2 - White Powder Coat
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 18'
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Video: Hands-On with the Dexter Zinc-Plated Brake Actuator w/ Drop, Electric Lockout
- Video: A Closer Look at the Alpha Systems Mylar-Backed Butyl Tape for RV Walls
- Search Results: jack foot
- Search Results: jack feet
- Search Results: bk2 100 bearing kit
- Video: A Closer Look at the Trailer Hub for 5,200-lb to 7,000-lb Axles
- Q&A: How to Pick Out Replacement Hub for UFP Hub Marked H-1377 A4E
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Q&A: How to Determine Correct Replacement For UFP H1377 Hub
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: Replacement Dexter Trailer Hub with 8-248 Marking
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer