Drum Brake Replacement Assemblies for Use with Titan Actuator
Updated 06/05/2018 | Published 06/03/2018
Products Featured in This Question
Question:
I purchased this: https://www.etrailer.com/Brake_Actuator/Titan/T4339720.html and now I need to replace the drum brakes. I have taken a photo see attached of the current brakes. I need at least 3500lb brakes. The original controller was an Atwood, though I do not know what types of brakes these are. What options do I have for hydraulic drum brakes?
asked by: Bart
Expert Reply:
Thanks for the photo and tape measure. That makes it fairly easy to help you get what you need. You need 3500 lb single servo brake assemblies. My recommendation is the Hydraulic Brake Kit - Dacromet - 10" - Left/Right Hand # AKFBBRK-35-D. The Dacromet is for increased corrosion resistance.
You could alternatively use the Hydraulic Trailer Brake Kit # AKFBBRK-35 for a standard protection against corrosion or even upgrade to the Demco Galvanized set # 18788-87 for superior rust prevention.
If you need to replace your brake lines, I recommend the Kodiak Hydraulic Brake Line Kit - Single Axle - 18' # 18SI-BLKIT or HydraStar # HS496-252 for tandem axles.
Product Page this Question was Asked From
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 4 way flat
- Search Results: l44643 / l44643 trailer hubs and drums
- Search Results: demco trailer brakes
- Shop: Demco Hydraulic Trailer Brakes - Uni-Servo - Galvanized - 10" - Left/Right - 3.5K
- Search Results: trail rite trailer parts
- Search Results: wishbone 4 way trailer wiring harness
- Search Results: bearing buddy bra
- Search Results: for towing ~ 4~way wiring included trailer hitch
- Shop: Lippert Complete Bearing Kit for 3.5K Trailer Axles - L44649/L68149 Bearings, L44610/L68111 Races
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Video: Checking Out the Demco Hydraulic Brake Kit
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - Dacromet - 10" - Left/Right - 3.5K
- Video: Detailed Breakdown of the Hydraulic Trailer Brake Kit
- Q&A: Replacement Brake Assemblies for Trailer with 10-1/4 inch Drums
- Q&A: Best Hydraulic Drum Brakes For A Boat Trailer With 3,500 Pound Axle
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Brakes - Hydraulic Drum Brake Kit - AKFBBRK-35-D
- Shop: Timken Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Hub Bearing Kit 3500LB Axle - BK2-100
- Video: Hands-On with the etrailer Hub Bearing Kit
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Video: Ultimate Overview of the Mounting Hardware for 10" Brake Assemblies
- Q&A: Surge Coupler Equipped Trailer Brakes Occasionally Actuate When Backing Trailer
- Q&A: Complete Hydraulic Brake Assy. for 2006 EZ Loader Trailer with Oil Bath Hubs
- Shop: Base Plate for Tow Bar
- Q&A: Troubleshooting Hot Hubs and Rims on a Trailer
- Q&A: Comparing etrailer/AxleTek and Dexter Electric Brake Assemblies
- Q&A: Brake Fluid Leaking Around Master Cylinder Fill Cap On Titan Aero 6000 Surge Brake actuator
- Shop: Vehicle Tow Bar Brake System