Replacement Parts for 2006 Marine Master Tandem Trailer

Question

Question:

Trailer buddy replacement break calipers pads bearings and seals 2006 Martine master tandem trailer 4500 lb. Quote for rear wheels please

asked by: Ken

0

Expert Reply:

I did some research on your 2006 Marine Master Tandem Axle Trailer and found some of the UFP part lists. Dexter owns that company as well as the Kodiak line, so the parts are extremely similar with different part numbers that should work very well as replacements.

I recommend the Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs # K225CP along with the Kodiak Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs # KDBC225S.

Then for your bearings and seals, I recommend the Bearing Kit for # 84 Spindle # BK2-100. Then for the Bearing Buddy # BB1980A-SS.

If you want to be absolutely sure prior to ordering, you can pull the bearings from your assemblies and give me the part number on the bearings and seal, or you can measure the spindle in those locations using a digital caliper like # PTW80157.

expert reply by: Jason S

0

Answer 1

In order to determine whether or not the Dexter Trailer Axle Beam with 4" Drop part #7685269 will be a good replacement for your Marine Master Boat Trailer Axle we would need to know the distance between the hub faces and spring centers on the…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 5

If you want the best, it's the MORryde Rubber Equalizers for Tandem Axle Trailers part #MR87ZR. These are the best as they offer the most travel which is basically how much that rubber bushing compresses and the more it compresses, the better…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…

view full answer...

Replacement Parts for 2006 Marine Master Tandem Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching