Result: tow shackles

AB, no those are correct. The Maxtrax #MA89PR has a maximum break strength of 30,864 lbs with a safe working limit of 15,432 lbs - meaning the shackle can handle up to 30,864 lbs, but should be safely used at 15,432 (or less) lbs. The general rule of…

We have the Bulletproof Hitches Shackle Hitch for 2-1/2" Receivers #ED25SHACKLE which fits 2.5 inch hitches. This has a 30,000 lb weight capacity. I attached a review video for this for you to check out as well.

Hey Don, the dimension you are looking for in your attached picture of the MORryde X-Factor part #MR33WR is 2-1/8 inches.

Hey Rob! Both the 25-1/4" long item #DX95CR and item #e44SR springs will work if you're replacing a 25-1/4" long leaf spring. They're close enough in capacity so long as you're not using too light of a spring with the 4,400 lbs…

Hello Robert, thanks for reaching out. The Roadmaster Comfort Ride is a great choice for a suspension upgrade. This system is compatible with the MORryde X-Factor Crossmembers, so you can add those to all 3 hangers if you wish. One thing I would do…

Hey Bryan, We have the Driver's Side #BP18-050 as well as the Passenger's Side #BP18-060 AL-KO/Hayes Disc Brake Caliper for a 10K/12K axle, which it sounds like you're needing. If you also need to replace your brake pads, then the kit…

Since you prefer a glossy finish and a mostly hidden trailer hitch for your 2017 Subaru Forester XT the hitch you'd want is the Draw Tite part #76182 which is both. Only the hitch opening hangs below the rear bumper so it's mostly out of…

I definitely agree with you there Dave, it would be a very nice option to have, but a 90 degree cord is not something made for the 50 amp SmartPlug RV Power Inlet and Connector #SM76FR. I will say the way the plug connects does make it a better, more…

Hey David welcome back! I am not sure what you mean by angled pieces that get welded to the hanger. We have two types of X-Factor Crossmembers and one of them attaches directly to your frame hangers with included brackets and hardware. The MORryde…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I am not aware of a bolt-on version of the Buyers Products Weld-On Safety Chain Retainer part #3375471000. However, if all you were wanting to do is mount your safety chains to the tongue of your trailer then you will just simply do so by running a…

Yes, the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ you're referring to will fit your 2023 Ford F-250. If you also wanted to take a look at the 5000, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal…