CartView Cart

CALL NOW - 800-298-8924

Product Experts Available Now!

Free Shipping on Orders Over $99

Only 5 Hours 10 Minutes Remaining




Chevrolet Blazer Trailer Hitch

change vehicle

Select Chevrolet Blazer Year

Trailer Hitch

Custom fit Trailer Hitch for your:



Available Years for Trailer Hitch



Trailer Hitches for Chevrolet Blazer

Hitches are custom designed by Draw-Tite, Reese, Hidden Hitch, Curt, and Torklift to fit your Chevrolet Blazer. Choose the hitch that is right for your towing needs and your budget.

All hitches come with a limited lifetime warranty and are manufactured in the USA.

We offer over a custom hitch for virtually every Chevrolet Blazer on the road.




What our customers are saying:

Just finished installing a hitch and light adapter on my Chevy Equinox. I am well pleased. It was straight forward and quick.

Dennis

Wichita, KS






Trailer Hitches, Front Mount Hitches, Fifth Wheels, Goosenecks, RV Hitches, and Weight Distribution

Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Torklift and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.


Hitch Accessories



More Trailer Hitches



Trailer Hitch Manufacturers






Chevrolet Blazer Trailer Hitch Videos

Trailer Hitch Installation - 1996 Chevrolet Blazer

Today on our 1996 Chevy Blazer, we're going to install a curt hitch part number C13020. Each process we do here on the driver side is going to be repeated identically on the passenger side. A total of six attachment points, three on each sides. Our fasteners will be our 1/2" carriage bolt and block along with a 1/2 plunge knot because this vehicle doesnt have a spare tire, we're ready to go ahead and put our hitch directly into position. We'll use our bolt and block to go from inside to frame rail out to hold into position once we get into place.Now, it's a good time to get an extra set of hands that will hold the hitch into place while installing your fasteners. We'll install each fasteners finger tight until we get them all in place.



Trailer Hitch Installation - 2000 Chevrolet Blazer

Today on this 2000 Chevrolet Blazer we are going to be installing part number 36244 from Draw-Tite. This also applies to Hidden Hitch part number 90183. We are going to go ahead and show you the mounting locations for our hitch. Its going to be the two factory bumper bolts that are holding your bumper in position, as well as the larger oval hole near the rear of the vehicle. It is going to be the same on the passenger side as well. :26





Chevrolet Blazer Trailer Hitch Questions and Answers


  • Hitch Recommendation for a 2002 Chevy Blazer
  • I attached a link to a page that has all of the hitches we carry that would be confirmed to fit your 2002 Chevy Blazer. The Draw Tite Hitch part # 75079 that you referenced would be an excellent choice. For trailer wiring I would recommend the Curt Custom Fit Vehicle Wiring # C55411. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
    view full answer...

  • Trailer Hitch and Wiring for a 1997 Chevy Blazer
  • There should be no problem with the spare tire on your 1997 Chevy Blazer and you will be able to install Curt trailer hitch # C13020 without interference from the spare. Take a look at the picture I have included showing the hitch installed and the spare tire in place. There is plenty of room. I have also linked a video showing installation and the installation instructions for you. If you plan on doing some towing I also recommend the etrailer ball mount kit # 989900. It comes with...
    view full answer...

  • Will Curt Trailer Hitch 13020 Interfere with the Gas Tank on a 2001 Chevy Blazer
  • The Curt trailer hitch # C13020 will not interfere with the stock gas tank on a 2001 Chevy Blazer. It bolts to the sides of the frame so the gas tank should not be in the way when installing the hitch. I have linked a couple of videos showing typical installations and a link to the instructions for you to view. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. And if you need...
    view full answer...

  • Will Curt Trailer hitch 13020 Fit a 2002 Chevy Blazer
  • Yes, Curt trailer hitch # C13020 will fit all models of the 2002 Chevy Blazer. I have included a link to a video showign a typical installation of the hitch for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. For trailer wiring use # 18252.
    view full answer...

  • Hidden Hitch Recommendation for a 2000 Chevy Blazer 4x4
  • Yes, the Hidden Hitch Trailer Hitch # 87478 that you referenced will work on your 2000 Chevy Blazer LS 4x4. You may find that you will need to reposition the spare or modify the carrier to get it to work. But it should not be too big of a deal. The only wiring kit we have available for you vehicle will require splicing to install. The wiring kit is the Trailer Wiring Harness # 18252. I attached an install video for this product for you to check out also. To complete your towing setup...
    view full answer...

  • Will Curt Trailer hitch # C13300 Fit a 2002 Chevy Blazer S-10 ZR2
  • I spoke with my contact at Curt and he stated that the trailer hitch # C13300 will fit your 2002 Chevy Blazer S-10 ZR2 model. I have included a link to the installation instructions for you to view. If you plan on doing some towing, I recommend the etrailer ball mount kit # 989900 which comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring, use # 18252. I have included a link to a video that shows a typical installation of the wiring.
    view full answer...

  • Does the Curt Hitch # C13300 fit 2001 Chevy Blazer LT 4-Door 4 x 4
  • The Curt Trailer Hitch Receiver # C13300 that you referenced is confirmed fit all model 2001 Chevy Blazers so it should work well on your LT, 4-door, 4WD Blazer. This will also clear your spare tire. I attached installation instructions for this product for you to check out also. To complete your towing setup you may be interested in the following products: Ball Mount # 2923 Draw-Tite Wiring for the Chevrolet Blazer # 18252 (installation video attached) 1-7/8 inch Hitch Ball...
    view full answer...

  • Trailer Hitch Installation Instructions for a 1975 Chevy Blazer
  • We have not yet had the opportunity to install the Draw-Tite hitch # 75129 on a vehicle so I do not have a picture. But I do have the instructions that shows where on the frame the hitch installs. I have included a link to the installation instructions for you. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring use T-One Vehicle Wiring Harness, # 118311....
    view full answer...

  • Will CURT Trailer Hitch, # C13300 Fit a 2002 Chevy Blazer, 2-Door, 4x4 Model
  • Yes, the CURT Trailer Hitch, # C13300, will fit your 2002 Chevy Blazer, 2-door, 4x4 model. If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # 989900, which comes with 2 ball mounts, 2 balls, a pin with clip, and a carrying bag. For trailer wiring use 4-Pole Hardwire Kit Including Circuit Tester, # 18252. I have included a link to a video showing a typical installation of this wiring harness.
    view full answer...

  • Will the CURT Hitch # C13300 Install on a 1997 Blazer With a Spare Tire
  • I checked with CURT and this hitch will install with a spare tire mounted to your 1997 Chevy Blazer. If you plan on doing some towing you may be interested in the following products to complete your towing setup: Draw-Tite Wiring # 18252 (installation video attached) Ball Mount # 2923 Hitch Ball with 2 inch Diameter and Medium Shank # 19247 Hitch Ball with 1-7/8 inch Diameter and Medium Shank # 19260 Pin and Clip # PC3
    view full answer...

  • Will Hidden Hitch Trailer Hitch # 87478 Fit a 2005 Chevy Blazer, 2 Door with 4 Wheel Drive
  • Yes. According to Hidden Hitch, Trailer Hitch # 87478 will fit all models of the 2005 Chevy Blazer including those with 2 doors and 4 wheel drive. I have included a link to the installation instructions for you to view. If you plan on doing some towing with the hitch, the recommended ball mount is # 2923 and you can use pin and clip # PC3. For a ball you can use # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 19287 (2-5/16 inch diameter). For trailer wiring, use 4-Pole...
    view full answer...

  • Recommended Draw-Tite Hitch for a 2000 Chevrolet Blazer 4WD
  • The hitch you will need for a 4 wheel drive 2000 Chevrolet Blazer is the Draw-Tite Class II hitch, part # 36244. This is a 1-1/4 inch hitch with a towing weight capacity of 3500lbs and a tongue weight capacity of 300lbs. When installing on a vehicle originally equipped with an OEM hitch, the OEM bumper brackets must be purchased and installed prior to a new hitch installation. I am including links to the installation instructions of the Draw-Tite and a video of the hitch being installed...
    view full answer...

  • Will I Be Able to Keep the Spare Tire When I Install Curt Hitch # 13020 on my 2002 Chevy Blazer 4x4
  • According to the installation instructions you will just raise the hitch into position and then torque down the included nuts and bolts to the specified torque rating and you will be set. There is no mention having to modify/remove the spare tire at all. I would assume that as long as your spare tire is the original factory size tire you would have no issues with it at all installing this hitch on your 2002 Chevy Blazer 4x4 with 4 doors. You may need the following items to complete...
    view full answer...

  • Installation of Hidden Hitch # 87478 on 2004 Chevrolet Blazer With Under Body Spare Tire
  • The Hidden Hitch Class III 2 Inch Hitch, part # 87478, is a direct mount to your 2004 Chevrolet Blazer with the under body spare tire. The repositioning of the spare tire means that you will need to loosen the spare tire to allow front to rear movement of the spare tire. This movement will allow you more room to install the hitch. After installation of the hitch you will tighten up the spare tire. The spare tire will still be located under the vehicle, it just might not be in the exact...
    view full answer...

  • Is Installation Hardware Included with the Valley Class III Trailer Hitch for 98 Chevrolet Blazer
  • Yes, the Valley Class III Trailer Hitch Receiver, item # V81690, comes with all of the hardware needed to attach the hitch to your 1998 Chevrolet Blazer. I have listed some items you may need to complete your towing setup. Wiring - # 18252 Ball Mount - # 2923 Hitch Ball - 1-7/8 Inch # 19260 Hitch Ball - 2 Inch # 19247 Hitch Ball - 2-5/16 Inch # 19287 Pin and Clip # PC3
    view full answer...










Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email





Free Shipping on Orders Over $99

Only 5 Hours 10 Minutes Remaining


etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com