Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I contacted the manufacturer in regards to the Demco SBS Air Force One #SM99243, and they explained that the reason they tap into the vacuum system of a vacuum brake booster is that their system creates vacuum and they can keep the power brake…
view full answer...Yes, if you wanted the Roadmaster trailer wiring diode kit part #154-792-118158 to activate the third brake light of your vehicle you would just need to run the red wire to the third brake light and it activate the third brake light.
view full answer...Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this…
view full answer...We do have the components needed to flat tow your 2021 Ford Bronco Wildtrak. The first thing needed is a base plate kit like with the part #RM92ZR which is custom fit for your vehicle and a very easy to use setup. In addition to the base plates,…
view full answer...We do carry a service/rebuild kit for the Roadmaster Falcon 2 Tow Bar #RM-520 that you have that the arms of are not wanting to function properly. You would want a Roadmaster Service Kit for Falcon 2 Towbar #RM910003-65. I spoke to my contact at…
view full answer...It sounds like you may have a 7-way trailer connector and a 4-way trailer connector on your truck and only a 4-way connector on your trailer. Is that correct? See the attached picture for examples of each. If this is the case, then this change will…
view full answer...I took a look at the owner's manual of a 2016 Chevy Colorado and a four wheel drive model can be towed so long as it has a N (neutral) and Four-Wheel Drive Low setting. There are a number of parts you're going to need in order to do this,…
view full answer...Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…
view full answer...There are 2 different capacities independent of each other though related. Tongue weight is the downward force or weight on the trailer hitch. So it is pushing down at the back of the vehicle. The gross trailer weight is the weight of whatever it is…
view full answer...Have you tried cleaning and lubing the arms yet? Here's how to do that in case not: I contacted Roadmaster about instructions on cleaning their tow bars. Our contact at Roadmaster informed me that you will want to start by soaking the arms with a…
view full answer...On both a 7-Way and 4-Way trailer connector the brake lights and turn signals are on the same circuit so it is strange that the brake lights aren't working. But, brake lights draw more constant power than the running lights or the turn signals so…
view full answer...First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part #PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached. If the voltage…
view full answer...Related Searches
Filter Your Search
Contact and Help