2000 Chevrolet Silverado Windshield Covers

Hi Wilfredo, absolutely! If you want the easiest and most seamless setup, this is the combination I would go with for your 2026 Jayco Greyhawk and 2026 Ford Maverick Hybrid. I would start with the Roadmaster Direct Connect Base Plate Kit, part…

Hey Terry, thanks for all of the information! If your aftermarket bumper doesn't have special loops designed for safety chains, you should attach your safety cables directly to the Jeep’s frame rails. You will definitely want to use safety cables…

It most cases, it's recommended to go ahead and install a trickle charger on the vehicle's battery while using a supplemental braking system like the Demco SBS Stay-IN-Play DUO Supplemental Braking System part #SM99251. In most cases, there…

Hey Laura! Yes, the Van Windows Direct #VW83FR and #VW45FR come with the parts needed for installation. However, each one does list some additional materials and tools to complete the installation. I went ahead and attached pictures of these below. I…

Hey Tim, thanks for reaching out, and good question. That Demco Vacuum Tee Fitting #DM6257 is actually made so you don’t have to cut into anything, but it only works if your Jeep has the right style connection at the brake booster. On the newer…

Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…

Hi! Yes Terry, the Power Mountain Tallboy Off Road Jack Stand, part #PM75ZR, is designed with the extra height needed for lifted trucks and SUVs. It has a 37.75 inch reach and supports up to 6 tons, with seven height positions ranging from 10 13/16…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

If the Truxedo tonneau cover happened to have the Truxedo TS rail kit (we can't get it anymore) then use the Yakima Overhaul HD Ladder Rack part #Y01151-5755 would fit with it. If you do not have those rails though it would not work.

As long as the bumper you mention is rated by its manufacturer for towing, you won't need a base plate. The Roadmaster #RM-522 Falcon All-Terrain tow bar can be used on a D-ring bumper like the Rock Hard 4x4 Patriot Bumper if the proper adapter…

The Roadmaster #RM-035-1 D-ring adapters are indeed compatible with a Roadmaster Nighthawk tow bar. However, because you aren't using traditional base plates, you might have difficulty finding a good spot to attach the safety cables. In this…

The Roadmaster Direct-Connect Base Plate Kit #RM-344-3B have a tab with a hole on the bracket portion of the baseplate that can be used to connect your safety cables. You will most likely need to use some quick links #RM-910022 since the hole is…