Lippert SolidStep RV Steps for Camper with a 23-3/4" Doorway Measurement and 22-3/4" Entry Height

Question

Question:

I own 2019, Lance 1995 camper, and I am looking to up grade the steps there are 2 steps to manual fold down step that fold up inside the camper door way when Im ready to go. the dimension of the doorway is 25 inches from side to side, inside flange dimension is 23 3/4 inches from side to side, I measured 22 3/4 from the ground top of the threshold. Would the Lippert Solid Step Manual Fold Down Step fit? Or, could you recommend a set of steps tha will meet my need? Thank you for your time

asked by: Patrick M

0

Expert Reply:

We do have a Lippert SolidStep that will fit, but the SolidStep Manual Fold-Down Steps for 25" - 28-7/8" Wide RV Door Frames # LC733931 are not the correct ones.

Instead, you will want to use the SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames # LC713662.

expert reply by: Scott S

0

Answer 1

Great questions. I have solutions for both questions. Lippert does not sell replacement bolts or hardware kits for this application you will be able to source the bolts you need from any local hardware store. As for a replacement options I strongly…

view full answer...

Answer 2

You are right on. The 8" rise/drop on the MORryde StepAbove Fold-Down Steps #MR98RR is the height between the steps. The #MR48RR you were looking at has a 9" rise/drop meaning the distance between the steps is 9". The #MR98RR is…

view full answer...

Answer 3

Thanks for the picture Mike! The MORryde StepAbove RV Steps #MR48RR you were looking at will still work just fine with your threshold that's around 1/2" tall. The issue comes more into play with the threshold being too tall not allowing the…

view full answer...

Answer 4

Hey Joe, so when the Lippert Solidstep part #LC65DX is folded up in the stored position it will take up 10 inches of space inside the doorway of your RV. Do you have any cabinets near the doorway?

view full answer...

Answer 5

I spoke with MORryde and they stated the item number you were given does not match anything they have. Possibly it's the item number that the RV shop uses instead of the manufacturer number? Based on your photos it appears to me that you have a…

view full answer...

Answer 6

The Lippert SolidSteps part #LC713662 that you referenced look like the picture that I attached.

view full answer...

Answer 7

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 8

Hi Stephen; the CE Smith Keel Roller #CES94JR, Roller Shaft #CE10727A, and bracket #CE10500G will all work together in the way you described. Since there is only a slight difference in the length it won't hurt to cut it down. However, I do agree…

view full answer...

Answer 9

Hey Terry, thanks for reaching out! The closest thing we have to what you described is the Flexco Manual Pull-Out Steps for RVs #SMFP-2100. There are some slight differences in the bracket width, step width, and step height though so it won't be…

view full answer...

Answer 10

Hey John, we have 30 amp twist in power inlets from other brands like Hughes part #HU66VR but at this time we do not have a Furrion brand option. What drew you to the Furrion?

view full answer...

Answer 11

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Lippert SolidStep RV Steps for Camper with a 23-3/4" Doorway Measurement and 22-3/4" Entry Height

Product Page this Question was Asked From

Continue Researching