Comparison of Tekonsha Prodigy P3 and Primus IQ Brake Controllers

Question

Question:

Good Morning, Could you please tell me what the difference is between the Tekonsha Prodigy P3 and the Tekonsha Primus IQ?

asked by: George W

1

Helpful Expert Reply:

Although the Tekonsha Prodigy P3 # 90195 and Primus IQ # TK90160 electric brake controllers are very similar they do have some key differences as well. For one the P3 is designed to work with electric and electric over hydraulic brake systems. The Primus IQ will work with electric brakes. Also the Primus IQ will operate a maximum of 3 axles and the P3 will work with 4. The display on the P3 is more informational as opposed to only showing one feature at a time. Take a look at the two videos on them that I've attached to see the difference in the displays. Another feature of the P3 is that it lets you store up 5 different settings configurations if you have multiple trailers to tow. Finally, the P3 has a higher vertical range that it can be mounted. The P3 automatically levels when mounted within a 360 degree vertical range and the Primus IQ must be angled between 0 and 90 degrees.

They are both proportional brake controllers so they will apply the brakes in the same fashion. They also install the same, using # TK93VR in your 2017 Jeep Grand Cherokee.

expert reply by: Charles S

1

William L.

8/1/2020

Looking for a recommendation on a Brake Controller (Tekonsha IQ or P3 or Draw-Tite IV) for a 2020 Ford Explorer, with factory towing packing, towing a Casita 17' travel trailer; estimated wet weight between 3,600 and 4,000 lbs. Will be using an Anderson Weight Distribution Hitch.

Reply

Chris R.

8/11/2020

You really can't go wrong with the Redarc Tow-Pro Liberty # RED24FR and it's what I recommend for you. It's one of the best controllers on the market because of its reliability and the way it installs. If your Explorer is equipped with the factory 7-Way connector, you just need to add the Adapter Harness # RED87FR for a simple plug-and-play install.

Reply

Answer 1

You will first want to check the fuses on your tow vehicle. Some vehicles could have fuses for operating the turn signals and brake lights of a towing package. You will want to check if they are installed and working properly. The next thing is to…

view full answer...

Answer 2

According to my research, if your 2019 Mercedes-Benz Sprinter 3500 came with a factory 7-way trailer connector you will have the brake controller connector pre-wired. This pre-wired connector should be under the driver side seat which you can see…

view full answer...

Answer 3

The shortest 2 inch hitch extender we have is the part #HE06 which has a distance of 7-3/8 inches from hitch pin hole to hitch pin hole.

view full answer...

Answer 4

Brake controllers are usually mounted so that they are within easy reach of the driver for emergency stops, typically near the driver's right knee. The quick-connect wiring adapters we offer, such as #TK93VR, are long enough for such…

view full answer...

Answer 5

I attached an install video for the Furrion Vision S part #FOS43TASF installed on an RV that was not pre-wired for the Furrion system but was able to easily tap into the wiring needed due to clearance lights being very close.

view full answer...

Answer 6

In order to install a 7-way trailer connector on the rear of your 2017 Mercedes-Benz Sprinter 2500 to your existing 4-way, you will need the Adapter 4-Pole to 7-Pole and 4-Pole part #37185. Unfortunately, they do not make a wiring harness that…

view full answer...

Answer 7

If you have a 7-way on your 2008 Mercedes Benz GL450, then I recommend using the Tekonsha Prodigy RF Wireless Trailer Brake Controller #TK94FR. The brake controller wiring harness you mentioned #3040-P will not work with your vehicle, so the best…

view full answer...

Answer 8

The best tried and true electric trailer brake controller for a 2021 Ford F-150 is the Tekonsha Prodigy P3 Trailer Brake Controller part #90195. The P3 has storable settings for multiple trailers, and easy to read LCD display, and integrated…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

This is definitely something that is frustrating and unfortunately, my answer is not going to be much better. When we have brought this to Dexter in the past, they have told us that their Electric Over Hydraulic actuators like the Dexter DX Series…

view full answer...

Answer 11

If you do not have the factory brake controller plug on your 1995 Dodge Ram 2500 then you will need to hardwire a brake controller to the vehicle. I recommend the Hopkins Agility Trailer Brake Controller part #HM47295 because it has multiple…

view full answer...

Answer 12

Yes, you can use Firestone air bag helper springs #F2550 on your 1999 Ford F-350 diesel with the B&W gooseneck hitch installed. The upper brackets for the air bags mount on the inboard side of the frame rails opposite the brackets for the…

view full answer...

Comparison of Tekonsha Prodigy P3 and Primus IQ Brake Controllers

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching