Hey Mike, with truck bed tool boxes like the Deezee part #DZ8560WB the fit really just does come down to dimensions and if you compared the dimensions of this to what your truck bed has and this would fit it's going to work just fine. The overall…
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
Hey Tod, the two UWS boxes have different shapes and capacities. If you check out the attached pictures you can see the differences between the part #UWS08298 and #UWS01044 to get a better idea. The #UWS01044 has a slightly smaller capacity at 8.2…
Hi Aaron! The DeeZee Red Label 5th Wheel Tool Box - Wide, Utility Chest Style - Aluminum - 14.9 Cu Ft - Black #DZ8560WB weighs 66 pounds. I have a diagram with measurements attached as well. Figured you could probably use them. : ) Are you going to…
Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…
Hi Pete; since the DeeZee Red Label 5th Wheel Tool Box - Wide, Utility Chest Style #DZ8560WB is a wide model it does not come with a tool tray or have one available from DeeZee. They have the #DZTBTRAY1 but it is only designed for 20" wide…
The BAK Revolver X4s Hard Tonneau Cover, short bed #BAK99ZR or long bed #BAK49ZR, measures about 8" when rolled up. It doesn't roll up completely up to the front so it will probably hang over the bed about 9" or 10" so you'll…
Yes, the Mounting Hardware for UWS Truck Bed Chests #UWS08353 is compatible with the UWS 48" Standard Chest Toolbox #UWS01061 (TBC-48-BLK) and your 2022 Ford Super Duty with aluminum truck bed.
Hey George, congrats on the new truck! You are definitely going to need to support the axle when lifting your Silverado with the Pacbrake Alpha HD Pro Air Bag Suspension Kit item #PB25RV. Lifting your truck by the frame will stretch the bags too far…
Thanks so much for the photo that was super helpful, and what the axle tag shows is that you have a #11 Dexter Torflex axle. We do have the correct lift kit for you, which is the following part: - Torflex Lift Kit - Tandem Axle #K71-724-02 This kit…
Hi Hilario, congrats on the new truck! ^___^ If this were my truck and I was installing a retractable cover on it (which I actually did with my Silverado), I would go with the manual RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte…
Hey John, thanks for the picture of your axle tag and welcome back! Based on the capacity of 3,800 lb that I see on the tag the correct lift kit would be the part #K71-707-02. Which Airstream do you have and are you trying to get better ground…
