Hey Delbert, thanks for reaching out! Yes, the Andersen Weight Distribution Hitch w Sway Control #AN53VR can be used for a lighter trailer like what you have. You'll just need to adjust the system to accommodate your weight and you'll be good…
I would be happy to help narrow down the choices to the best hitch for your 2021 Ram 1500 Classic Warlock edition. Since your main purpose will be for accessories, I recommend the etrailer Hitch Receiver item #e98852. This hitch is custom fit and…
The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…
Hey Charles, the easiest solution would be the Curt part #C55384. This plugs inline with your 7-way and gives you a 4-way on a wiring harness independent of the 7-way socket so it wouldn't get affected if your 7-way was open.
The smallest diameter 13 inch trailer wheel and tire will have a diameter of 24.1 inches (ST175/80-13). There are 3 common 12 inch trailer tire sizes: 4.80-12 has a diameter of 20.5 inches, 5.30-12 has a diameter of 21.9 inches, and 145/80-12 has a…
Your picture didn't make it through but it sounds like you would like to upgrade your tire and wheels on your trailer. You may substitute a 14 inch tire and wheel as long as you have both the wheel well height and width clearance for it, the…
Hey Ryan, the bracket kit part #PF1135-BKT-2 is normally the best solution as long as the trailer has a frame rail that runs the perimeter of it. Then if the frame is 2 inches wide you would want the part #CE15284GA and you'd be set. The other…
I have a solution for you that will allow you to make an adapter, but we do not sell one pre-made. To adapt your 9-pin trailer plug to work with the 7-way connector on the truck, you would need the 9-pin vehicle side connector that you referenced,…
The etrailer brand #e98852 and the Draw-Tite #75662 are almost identical. The capacities are the same, they'd both install in the same manner and they're very similarly priced. There are a few differences. The biggest difference is that the…
The Dometic CDMW12S requires a 20.39" wide x 14.52" tall x 16.02" deep opening in order to fit so the closest option we currently offer is going to be the High Pointe Standard RV Microwave #HP59ZR (19.1” wide x 11.5” tall x 14.8”…
No, according to Curt's fitment chart the Curt Trailer Hitch Receiver #13333 would be the correct fit for your 2021 Ram 1500 Classic Warlock instead of the #C13419 that you referenced. I've attached a short video below where Rob will walk you…
The highest capacity trailer spindle we offer is the TruRyde #TRU57FR spindle for 5.2-7K rated axles. The spindles are compatible with a 25580 Inner and an outer bearing with a 1.25 inch ID like the #14125A, #LM67048, or #15123.
