2014 Mazda CX-5 Accessories

change vehicle

Trailer Hitch

Performance Chip Tuners

Vehicle Lights

Tire Chains

Fluid Filters

Vehicle Engine Heaters

Windshield Wiper Blades

Windshield Covers

2014 Mazda CX-5 Videos

Best 2014 Mazda CX-5 Trailer Wiring Options

Today we're going to be taking a look at the best custom-fit vehicle wiring harnesses available for the 2014 Mazda CX5. Now all of the wiring harnesses that we have here today are all going to offer the four-pole flat trailer connector. That's going to power the right turn and brake, left turn and brake, running lights, and also it grounds out the system on the trailer. We've got our CURT here. This is a non-powered converter box. This is designed for use only in the CX5 with the incandescent bulb or non-LED bulbs. Then we're going to have the Tekonsha here and the Hopkins here.

Best 2014 Mazda CX-5 Hitch Options

Today on our 2014 Mazda CX5 we'll be looking at the most popular hitch options available. We have a class three CURT 2" receiver, part number C13127. We have a class two 1-1/4" receiver, part number C12080. We have a class two Draw-Tite 1-1/4" receiver, part number 36602. Finally, a class three Draw-Tite 2" receiver, part number 75217. I'd like to point out here, all of our four hitches here, they all install using the exact same mounting points. No drilling is required.

Trailer Hitch Installation - 2014 Mazda CX-5 - Hidden Hitch

Today on our 2014 Mazda CX-5 we're going to take a look at, and show you how to install the hidden hitch custom fit Class 3 trailer hitch receiver. This offers the 2 inch by 2 inch opening. It's part number is 87686. Here's what our hitch is going to look like installed. As you can see, you're not cosmetically adding a lot. Our cross tube is completely hidden behind that rear fascia.

Trailer Hitch Installation - 2014 Mazda CX-5 - Draw-Tite

Today, on our 2014 Mazda CX5, we are going to take a look at and show you how to install the Draw-Tite Max-Frame Trailer Hitch Receiver. This is a custom fit Class III hitch. Its part number is 75217. Here is what our hitch is going to look like installed. As you can see, you are not cosmetically adding a lot. Our cross tube is completely hidden behind that rear fascia. All we are going to have here is our receiver tube opening and our safety chain connection point.

WeatherTech Front Floor Mats Review - 2014 Mazda CX-5

Today on our 2014 Mazda CX5, we'll be taking a look at and showing you how to install the WeatherTech front floor mats in black, part number WT444191. These are also available in tan, part number WT454191 and in gray, part number WT464191. Here on our driver's side, we've already got it installed. As you can see, we're going to have all these channels down along the bottom portion of our floor mat. It's going to keep a lot of the dirt and debris away from your feet and off of your carpet. We also have our 2 mounting points here, which are going to secure on your carpets mounting points.

Thule Roof Rack Review - 2014 Mazda CX-5

Today, our 2014 Mazada CX5. We are doing a test it of the Thule arrow blade cross bars. That part number for our cross bars is THARB53 for our foot pack that we're using it's TH480R and for our foot kit we are using THKIT1721. We already have our foot bar on and placed. We are going to show you our back bar here. We've got one foot back in place and we will put that second one together now. Start my removing our end cap.

Trailer Wiring Harness Installation - 2014 Mazda CX-5

Okay, today on this 2014 Mazda CX5, we're going to install part number C56011 from Curt. This is a Curt T connector, vehicle-wiring harness with a 4 pole flat. Now we're going to install our wire harness. We need to get inside the vehicle so we will go ahead and open the back hatch and we'll go ahead and remove the floor coverings, as well as the threshold. It looks like there's two plastic fasteners. Okay, we'll go ahead and remove the rivet right here, this plastic rivet, so we will pull out the center and then the rest of it comes right out. It's just a steady pull straight up, will release it from those snaps. There it is. One is stuck so we'll just use a trim-panel tool to remove it. Out next step is to work with the side panel here, so we're going to undo this fastener and just pull it out a little bit so we'll get some extra working room to work our wires inside. It might be a good idea to go ahead and remove the phone core support inside as well.

WeatherTech Cargo Liner Review - 2014 Mazda CX-5

Today on our 2014 Mazda Cx5 we're going to be test fitting the Weathertech floor mats for the cargo area. This is in color black with part number Wt40553. This is also available in tan with part number Wt41553. To begin our test fit we'll go ahead and remove the previously installed floor mat for the cargo area. We'll grab our new Weathertech liner, place it in, and as you can see if contours perfectly and it it just kind of fits itself into place. Around the perimeter of the liner is a nice raised lip to help trap in any types of spills or materials that you don't want getting on your carpet. These mats are specially designed to fit the contour of the cargo area of our Cx5, so you can see here how it contours nicely around the shape or perimeter of the cargo area. We also have the nice channels. You can see here that these are designed to help trap in any type of dirt or moisture that you may trap in.

U-Ace 3D Kagu Custom Front Floor Liners Review - 2014 Mazda CX-5

Today on our 2014 Mazda CX-5, we're going to be test fitting the U-Ace 3D Kagu Custom Auto Floor Liners with MAXpider Grip for the front of your vehicle in black, part number L1MZ03811509. This is also available in beige with part number L1MZ03811502, and in gray with part number L1MZ03811501. We're going to begin our test fit over here on the driver side of the CX-5. The first thing we need to do is remove the previously installed floor liners. We're simply going to undo the anchor points, and then we can lift the previously installed mat out of place. We'll take the new U-Ace 3D Custom Liner. Once we have it place, we can connect the anchor points. The grommets just slide over the factory anchor point.

U-Ace 3D Kagu Custom Front and Rear Floor Liners Review - 2014 Mazda CX-5

Today on our 2014 Mazda CX-5 we're going to be test fitting the UA 3D Kagu Custom Auto Floor Liners with the MAXpider Grip for the front and rear of your vehicle in black. The part number is L1MZ03801509. This is also available in beige with part number L1MZ03801502, and in gray with part number L1MZ03801501. We going to begin our test fit over here on the driver's side of our CX-5. The first thing that we need to do is remove the previously installed floor liners. We're simply going to undo the anchor points. Then we can lift the previously installed mat out of place. We'll take the new UA 3D customer liner.

Softride Element Parallelogram Hitch Bike Racks Review - 2014 Mazda CX-5

Today on our 2014 Mazda CX-5, were going to be test fitting the Softride Element Parallelogram. This is a tilting 4-bike rack designed for use with inch and a quarter or two inch hitches. Its part number is SR26248. To being our test fit, well slide the shank of the rack into the receiver tube of our hitch. Now as we do this, we want to align one of the threaded holes up with the pinhole in the side. Im going to use the first one rather than the second so we can get as much clearance as possible.

Saris Freedom Hitch Bike Racks Review - 2014 Mazda CX-5

Today on our 2014 Mazda CX-5 we're going to be test fitting the Saris Freedom. This is a folding and tilting 4-bike rack designed for use in 2" hitches. Its part number is SA4414B. Now to begin our test fit we need to slide the shank of the rack into the receiver tube of our hitch. As we do this we want to keep an eye through the hitch pinhole in the hitch to determine when we have our holes lined up. With those lined up we're going to thread in our anti-rattle bolt from the left to the right.

Saris Axis Hitch Bike Racks Review - 2014 Mazda CX-5

Today on our 2014Mazda CX5, we're going to be test fitting the Saris Axis. This is a folding and tilting, three-bike rack designed for use in both inch and a quarter and twoinch hitches. Its part number is SA843B.To begin our test fit, we're going to slide the shank of the rack right into the receiver tube of our hitch. As we do this, we'll want to line up our threaded hole with the pinhole on our hitch tube. We'll then take our anti-rattle bolt and thread this in from the left to the right. We'll then tighten it down with a wrench.With that anti-rattle bolt tight, we'll now take the provided lock and simply slide it on the other end.

Saris Axis Hitch Bike Racks Review - 2014 Mazda CX-5

Today on our 2014 Mazda CX-5 we're going to be test fitting the Saris Axis. This is a folding and tilting 2-bike rack designed for use in both 1-1/4" and 2" hitches. Its part number is SA832. To begin our test fit we're going to slide the rack right into the receiver tube of our hitch. We'll line up the threaded hole with the hitch pinhole. We'll then use our anti-rattle bolt and thread that in.

Trailer Wiring Harness Installation - 2014 Mazda CX-5

All right, today on our 2014 Mazda CX-5, we're going to install part number 118563. To start off our install, we're going to have to open up the back hatch and get access to the wiring behind the tail lights, so we're going to have to remove some interior body panels to do this. First off, we'll remove the floor coverings to get down to the spare tire. Next we'll go ahead and remove yourthreshold. Next we'll go ahead and remove the foam inserts around the spare tire. Now to remove the threshold, there will be two plastic fasteners, one on each end, we have to remove. Working from the bottom and prying from the sides, we'll go ahead and work it free, then we can go ahead and loosen up the side panels. There will be a small plastic fastener we have to remove, we'll do this on both sides.

Trailer Hitch Installation - 2014 Mazda CX-5 - Hidden Hitch

Today on this 2014 Mazda CX-5, we're going to install part number 87623. This is what the hitch looks like when it's installed. Next we'll go ahead and give you some measurements to help you out in selecting some accessories such as a ball mount, a bicycle rack, or a cargo carrier. From the top of the receiver opening down to the ground will be about 13 inches. And from the center of the hitch pin hole to the edge of the bumper will be about 4 inches. Now I'll go ahead and show you how the hitch is installed. First thing we need to do is go ahead and loosen up the exhaust system.

Trailer Hitch Installation - 2014 Mazda CX-5 - Draw-Tite

Today on this 2014 Mazda CX5 we're going to install part number 75748 from Draw-Tite. This what the hitch looks like when it's installed. Next, we'll go ahead and give you some measurements to help you out in selecting some accessories which is the ball mount, bicycle rack, or a cargo carrier. From the top of the receiver opening down to the ground will be about 13 inches. From the center of the hitch pin hole to the edge of the bumper will be about four inches. Now, we'll go ahead and show you how the hitch is installed.

U-Ace 3D Kagu 2nd Row Floor Liner Review - 2014 Mazda CX-5

All right, today, on our 2014 Mazda CX-5 we're going to install the 3D Kagu Custom Auto Floor Liner with MAXpider grip, part number L1MZ03821509. All right, to start off our install, we need to remove the original floor mats that are on the floor because we need to work with just the bare carpet. We'll take those out of the way. We'll take new Kagu Floor Liner and put it into place. We put it into place and you can see how it's all a one piece unit that goes all the way across. It covers the hump in the center and it also has room and matches up evenly to the center console. It has a raised edge that goes all the way around.

2014 Mazda CX-5 Questions and Answers

Choosing Between 1-1/4-Inch Class II Hitch and 2-Inch Class III Hitch for 2014 Mazda CX-5
The actual weight difference between the three Class III hitches for your CX-5 and the one 1-1/4-inch Class II hitch # C12080 is the same 2-lb difference as between their shipping weights. The weight of the packaging for both hitch classes is essentially identical. A far more important consideration for your application with a 2-inch bike carrier is the hitch's tongue weight capacity, which is 525-lbs for a 2-inch Class III hitch and 300- or 350-lbs for a 1-1/4-inch Class II hitch, depending...
view full answer...

Platform Bike Rack Recommendation for Best Ground Clearance
The rack that would give you the best ground clearance and bike wheel protection would be the Saris Freedom part # SA4414B. This rack has an angled shank that angles up soon after the shank exits the hitch opening. The bikes are also loaded higher and higher as you get further away from the back of the vehicle, whereas the other racks don't have that feature. Where you will see ground clearance issue the most will be the portion of the rack that exits the hitch opening. On the # HR1400...
view full answer...

Trailer Hitch Comparison for a 2014 Mazda CX-5 Draw-Tite # 75217 versus Curt # 13127
I have provided a link to the hitches that are confirmed as a fit for your vehicle. When comparing the Draw-Tite Class III trailer hitch # 75217 to the Curt # C13127 Class III they are very similar, and the weight capacities are the same. I have included a photo of the two hitches installed, and yes the Draw-Tite option is recessed a little bit more under the vehicle than the Curt option. This is likely due to the profile of the hitch, and mounting style. The Hidden Hitch option uses...
view full answer...

Recommended Trailer Hitch and Bike Rack for 2014 Mazda CX-5
For your 2014 Mazda CX-5, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76138. This is a Class III trailer hitch that is confirmed to fit your vehicle. As you referenced in your question, a Class II hitch will absolutely work in terms of its weight capacity to transport up to 3 bikes. The reason I recommend going with a Class III hitch, considering that you will likely never come close to reaching its weight capacities, is because of the 2 inch receiver that it provides....
view full answer...

Adaption a 7-Way Blade Style Connector to a 6-Way Square Connector on a Trailer
Using multiple adapters just increases the chance that something could go wrong. The best solution is to use an adapter to go from a 7-Way blade style to the 6-Pole square. To do that though an adapter would have to be fabricated. All you will need is a trailer side 7-Way, # H20042, and a vehicle side 6-Way square. For the 6-Way square you would need # 37995 but only use the vehicle end to wire to the wires on the 7-Way, # H20042. On the 7-Way the wire functions are: White = ground Red...
view full answer...

Recommended Mounting Hardware For Trailer Lights
I recommend using self tapping screws to install the Oblong Trailer Clearance, Side Marker Light, 1 Wire - Amber # MC68AB, the Right Fender Clearance Trailer Light, Prewired - Amber and Red # BA44FNR or # BA44FNL, and the Trailer License Plate Light with Housing and Mounting Bracket - Clear Lens - Black Base # LP81BB. For these installations you can use Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc # FA1131822, which is corrosion resistant and has a hex-washer-head less likely to strip.
view full answer...

Capacity of Hitch and Bike Rack for 2014 Mazda CX-5
One of the main advantages of a hitch mount rack is the higher possible capacity (trunk mount racks carry a maximum of 3 bikes) while hitch mount racks can accommodate up to 5 bikes. You already touched on the other advantage, the hitch mount rack does not come into contact with the painted finish of the vehicle, therefore the rack cannot dent or otherwise mar the finish. Although the Draw-Tite Class III hitch you referenced, part # 75217 has a 525 lb tongue weight capacity, you will...
view full answer...

Is the Saris Freedom 4-Bike Platform Bike Rack a Good Bike Rack
Saris makes a good rack and the Freedom SuperClamp # SA4026, is no exception. We only recently started carrying Saris racks which is why you do not see a lot of information presently on our site. It is a newer rack in the Saris lineup coming on the heels of the regular Freedom rack # SA4414B. The main difference is that the Freedom SuperClamp holds the bikes at the wheels which is the best way to carry bikes with carbon frames and/or wheels and bikes with step through frames. Bikes with...
view full answer...

Recommended Hitch to Carry 4 Bikes on 2014 Mazda CX-5
For your 2014 Mazda CX-5 to support the Yakima FullSwing 4-Bike Rack # Y02465 or the Thule Apex Swing 4 Bike Carrier # TH9027 you will need a Class III hitch with a 2-inch receiver. The hitch I recommend is Draw-Tite Trailer Hitch # 75217 which is a custom fit for your vehicle and is the most popular option for the Mazda CX-5. For women's bikes or bikes with sharply angled top tubes or step-through frames, using a frame adapter like part # TH982XT is recommended. The adapter spans...
view full answer...

Weight of Curt Trailer hitch Mount Cargo Carrier 18153 and 18151
Curt trailer hitch mount cargo carrier # C18153 has a shipping weight of 71 pounds. Subtract about 3 pounds for packaging and you are looking at 68 pounds. Carrier # C18151 has a shipping weight of 58 pounds so 55 pounds for the carrier. Someone would have to come along with a couple of wrenches to steel the trailer portion because it swivels up or down on a bolt. But then they would just have this heavy tray to lug around and wouldn't be able to use it in a vehicle because the tray...
view full answer...

Hitch and Wiring Recommendation for a 2014 Mazda CX5
For a hitch I would go with a Curt Trailer Hitch Receiver # C13127. This is a Class III hitch with a 2 inch opening that has more than enough capacity for your 800 lb camper, but will also give you more future towing options since it has a higher capacity than a 1-1/4 inch hitch and because more hitch accessories are made for 2 inch hitches. I attached an FAQ article on how to pick out the correct rise/drop ball mount. The correct ball mount is picked out so that the trailer will sit...
view full answer...

How Does the Thule Apex Swing Away Bike Rack part # TH9027 Lock to a Hitch
I attached a picture that shows the arm on the shank of the Thule Apex Swing Away Bike Rack part # TH9027 that will snap onto the hitch pin and once you tighten the anti-rattle knob you will be able to lock the rack with the included key to the hitch of your 2014 Mazda CX-5. Check out the review video I attached for this rack as well that shows this rack being demoed on a very similar CX-5 as yours. If you plan on carrying any womens or alternative framed bikes without horizontal...
view full answer...

Height Comparison of Curt Cargo Carriers # C18151 and # C18153
The bent shank on the Curt # C18153 is indeed going to give you more ground clearance than the straight shank on the # C18151. It will give you 2 inches more of a rise than the # C18151 carrier will. The weight capacity of both cargo carriers is 500lbs so the carrying capacity is the same between racks, but what makes the difference is that the angled shank elevates the platform for better ground clearance and easier loading. The # C18153 also has a slightly larger platform compared...
view full answer...

Will Yakima 21 SkyBox Fit 2014 Mazda CX-5 with Yakima Roof Rack
The Yakima SkyBox 21 Cargo Box, part # Y07337, will fit on your 2014 Mazda CX-5 with a Yakima roof rack with round crossbars, Q Clips, and Q Towers Roof Rack Feet for a naked roof. The cargo box will clamp to your crossbars with integrated clamps that adjust and tighten with a cam-action lever inside the box. The lever slides along a track and is tightened and released by hand knobs. When installing a roof cargo box to your Mazda CX-5 you will want to check the weight capacity of your...
view full answer...

Will Thule Evolution 1600 Cargo Box Clear Antenna and Hatch on 2014 Mazda CX5
The Thule Evolution cargo box has been discontinued since 2007 so I do not have any fit information on it. But I can tell you how to figure it out. First, there were two types of Evolution cargo box. One had just drilled holes for the mounting feet and the other had slots with more adjustability. In either case you will measure from the center of the forward most mounting foot position straight back to the furthest part at the back of the box. Then with the front crossbar as far...
view full answer...

Can Leaf Springs be Mounted to the Top of Dexter Trailer Axle # 20440I-EZ-60
You should not flip an axle upside down because axles have a bow in them at the center which helps give them their capacity. But all you would have to do is weld on new spring seats to the top of the axle. For axle # 20440I-EZ-60 you would need 2 of spring seat # TRSS175.
view full answer...

Comparing Thule Helium Aero 3 and Kuat Alpha Trailer Hitch Mount Bike Racks for a 2014 Mazda CX-5
Hands down my favorite bike racks are the Thule Helium Aero series such as # TH9043. Basically, the rack has a great set of features. It has the integrated cable lock, cradles with road-dampening technology, built-in anti rattle and locks, and it weighs only 19-1/2 pounds. The Kuat Alpha, A102-Black, for 2 inch hitches or A102-BLACK-114, for 1-1/4 inch hitches are no longer made but when they were they were excellent racks and weighed just over 14 pounds. If you wanted a rack that would...
view full answer...

Thule Doubletrack Platform Bike Rack Recommendation for a 2014 Mazda CX-5
Either the Yakima HoldUpBike Rack # Y02445 or the Thule Doubletrack Bike Rack # TH990XT would work well with the Curt Hitch # C12080 that you referenced. Based on the customer reviews of both racks I think the # TH990XT would be a better pick for you. I attached a review video of this rack being demoed on a very similar CX-5 as yours for you to check out also. With Curt hitches they recommend you use a support strap to stabilize the load when using a non-supported load such as a bike...
view full answer...

Availability of Trailer Wiring Harness for 2015 Mazda CX-5
Neither Curt nor Tow Ready have done any testing on a 2015 CX-5 as of yet. My Curt representative tells me that the # C56175 Universal Fit wiring harness should work, but they cannot say if the plug and play options are a fit. Test fits should be performed over the next several months.
view full answer...

What are the Different Circuits on a 4-Way
The jacketed circuit is the ground. The one right next to that one is the tail light circuit, next to that one is the left turn circuit. And then the last one on the end is the right turn circuit. Check out the picture I attached to see the circuits labeled. I attached an FAQ article on trailer wiring that you might find informative also.
view full answer...

Trailer LED Lights Not Working when Connected to a Mazda CX-5
There can be issues on some vehicles/trailers using LED lights. Sometimes the lights don't work at all and other times weird things happen like what you are describing. It happens because LED lights draw such little power it can sometimes confuse the vehicle side of the system. First, we need to make sure you have the proper wiring harness on your 2014ish Mazda CX-5. If the vehicle itself has LED lights I recommend using harness # 118563 which is listed for models with or without LED...
view full answer...

Fit of Draw-Tite Class III # 75217 Trailer Hitch on 2015 Mazda CX-5
According to Draw-Tite, the Class III # 75217 is indeed compatible with your 2015 Mazda CX-5. If you'll be using the hitch for towing purposes, you would also need the following items to complete your towing system: Trailer wiring harness, part # 118563 Ball mount, part # 2753 1-7/8 inch trailer ball, part # 19261 or 2 inch ball, part # 63845 Locking hitch pin, part # 40107
view full answer...

Width of the Saris Freedom Superclamp 2 SA4025 For Fitting In Trunk
I spoke with my contact at Saris and he informed me that the Saris Freedom part # SA4025 that you referenced measures 48 inches in width on the main support beam of the rack. The wheel holders are plastic.
view full answer...

Which Yakima Roof Rack Fits 2014 Mazda CX-5 with Raised Side Rails
For your 2014 Mazda CX-5 with Raised Side Rails we offer several Yakima roof rack options you can see on the linked page. I recommend the Core Bar rack system made of parts # Y00421 and # Y00147. This costs the same as a basic round bar rack but it will create less wind noise thanks to the bars' more aerodynamic shape. I've linked you to some FAQ articles about roof racks and their available accessories.
view full answer...

Recommended Trailer Hitch And Trailer Wiring Harness For 2014 Mazda CX-5
The installation of a trailer hitch on your CX-5 is an easy bolt-on and requires no drilling into the frame. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver, part # 75217 for your Maxda. I recommend this trailer hitch because the installation is very similar to the Curt Hitch, part # C13127, but no stabilizing strap is required when using the hitch for non-towing accessories. The use of a stabilizing strap like part # 18050 is required by Curt or it will void the warranty....
view full answer...

Trunk Mounted Bike Rack Recommendation for a 2014 Mazda CX-5
There are several trunk mounted bike racks that are confirmed to fit your 2014 Mazda CX-5. See the link to the right to see them all. The one I like and recommend the most is the Thule Raceway bike rack part # TH9001PRO. What makes this rack far superior to the others is the attachment system. It uses 4 retractable coated steel cables to attach to the vehicle rather than 6 nylon straps like other racks. This makes installation quick and easy and the cables also last longer. The...
view full answer...

Cargo Box that Will not Interfere with Hatch or Antenna for 2014 Mazda CX-5
If I do the match correctly the longest set of skis you have are 65 inches. This is good because that means you will not need a long cargo box which will increase the possible options that will fit without interference. The Pulse L # TH615 does have the length you need without being too long. On the inside the box is 72 inches long, 76 inches long on the outside. Thule does list the box as a fit for your 2014 Mazda CX-5 and it will not interfere with the rear hatch when opened. However,...
view full answer...

Comparing Thule XB16 and XG12 Pro Tire Chains for a 2014 Mazda CX-5
If you imagine that you are on the side of the road, in the cold, wet snow, with other vehicles going by you can probably guess that you would want the chains that are going to be the easiest to install. Something that you won't have to put on, drive a little, and then get out again to adjust. If you go with the XG12 Pro chains for your 2014 Mazda CX-5, # TH01594245, you will have chains that are easier to handle and you won't have to manually adjust them. For me, that is well worth...
view full answer...

How to Transport Bikes and Tow a Camper Trailer with a 2014 Mazda CX-5
One route you could go would be to use the long ball mount part # 80232 that you referenced and a towing bike rack like the part # S64664. Check out the review video I attached for the bike rack. Another solution for you would be to go with a roof rack bike rack. Which if you don't have a roof rack check out the link I attached that will take you to a page that has all of the racks we offer for the various roof designs of your 2014 Mazda CX-5. For a roof rack mounted bike rack you...
view full answer...

Trunk-Mount 2-Bike Carrier Recommendation for 2014 Mazda CX5 with Roofline Spoiler
Many trunk-mount bike racks have trouble with vehicles that have a roofline spoiler as this vehicle feature can interfere with installation and the rack's mounting straps can put pressure on the spoiler. But the clever folks at Hollywood Racks came up with an ideal solution in their Over-the-Top 2 Bike Carrier # HRF2. The linked video illustrates installation of this carrier whose unique frame design arches up and over the spoiler to avoid interference. You may want to add a cable...
view full answer...