Hello Joshua, Thanks for writing in. I'm sorry to hear you're having trouble getting the part ordered. Technology sure likes to keep things interesting sometimes. I looked up your previous order, and last year you purchased the etrailer…
Hi Calvin! All of the pre-greased hubs/drums, like the Terran Industries Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 4-1/2 #TX68VJ, come with bearings made overseas and are all basically the same quality. At least that I…
Since your door way width is 24 inches measured from flange to flange the correct MORryde StepAbove is the part #MR26RR. The part #MR86RR is for a smaller doorway width.
The factory hitch that came with your GMC Sierra 1500 was at least a Class III and possibly a class IV depending on what trim level you have. Looking at the available products as well as your specific application and towing needs, I recommend…
Hey Craig, the Curt hitch part #13322 that you referenced is a confirmed fit for your 2011 and GMC Sierra 1500 and would work great to replace your OEM hitch. It may not use all of the same install hardware as your OEM hitch but it will be more than…
The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…
Hi Rodney! We definitely have some options for you, but the right one is going to depend on what you mean by "kit". If you just mean the main AC unit that will connect to what you already have installed, you are going to want the Furrion…
Yes, to flat tow your 2011 Chevy Silverado 1500 you'll need the following components: Baseplate: etrailer Classic Base Plate Kit #e98959. Tow Bar: etrailer XHD Non-Binding Tow Bar #e94ZR. This tow bar comes with safety cables bracketed to the…
Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…
The 171255UC seal is the same as the Dexter 010-11088/K71-G01-80. We have that same seal available as the Grease Seal Kit- Triple Lip - Inner Diameter 1.719" - Outer Diameter: 2.565" - Qty 2 #DX49CR.
Hi Walter; there is a little bit of room for grease seals to flex but that only works when it is a really small difference. The 1.50" ID of the #TMK89ZR is going to be too small for your spindle. What you can use instead is the #10-42 which has…
