2008 Subaru Legacy Trunk Bike Rack

Features:

Offer your bike safe passage at an affordable rate with this trunk-mounted carrier. Passage mounts securely to your vehicle with the patented FitDial adjustment system and straps, and anti-sway cradles keep your bikes from jostling during transport.

Installation Notes:

Place top clips in the gap at the front edge of the top of the trunk, hatch or door.

Lower arm of carrier should be positioned on upper tier of bumper.

Set lower clips/hooks in tow loop located in the center of the vehicle behind the bumper.

Features:

Simple and sturdy, the Bones trunk-mounted rack lets you get back to basics. This 2-bike rack features dual, individually adjustable arms and anti-sway straps to keep your bikes stable during transport. The arched base accommodates most spoilers.

Installation Notes:

Designed for vehicles without a spoiler

Do not open trunk while rack is installed

Tech Tip:

Part SA3035 is required to replace lower hooks or place lower hooks inside trunk (details in the instruction manual)

Features:

Offer your bike safe passage at an affordable rate with this trunk-mounted carrier. Passage mounts securely to your vehicle with the patented FitDial adjustment system and straps, and anti-sway cradles keep your bikes from jostling during transport.

Installation Notes:

Place top clips in the gap at the front edge of the top of the trunk, hatch or door.

Lower arm of carrier should be positioned on upper tier of bumper.

Set lower clips/hooks in tow loop located in the center of the vehicle behind the bumper.

Features:

This 2-bike trunk rack fits over most factory spoilers and mounts easily with the patented FitDial system. Independently adjustable arms have Hold Fast anti-sway cradles with RDT for safe, stable bike transport. Built-in cable lock deters theft.

Installation Notes:

Place top clips in the gap at the front edge of the top of the trunk, hatch or door.

Lower arm of carrier should be positioned on upper tier of bumper.

Set lower clips/hooks in tow loop located in the center of the vehicle behind the bumper.

Features:

This 2-bike trunk rack features a QuickTrigger hub system for easy setup on your vehicle. The adjustable arms help to keep bikes level. StableCradle anti-sway cradles with removable ChainStraps allow for easy bike loading. Folds flat for storage.

Installation Notes:

Place the upper strap hooks at the top edge of trunk, hatch lid, or rear door

Outer/Lower support frame rests on the lower portion of the license plate, below the numbers

Place the lower strap hooks at the bottom edge of the trunk, hatch lid, or rear door

Side strap hooks to back side edge of trunk, hatch, or rear door next to tail lights

Features:

The Gateway 2-bike trunk rack fits over most factory spoilers, and it mounts easily with the patented FitDial system. The independently adjustable dual arms have Hold Fast anti-sway cradles that provide safe, stable bike transport.

Installation Notes:

Place top clips in the gap at the front edge of the top of the trunk, hatch or door.

Lower arm of carrier should be positioned on upper tier of bumper.

Set lower clips/hooks in tow loop located in the center of the vehicle behind the bumper.

Features:

Simple and sturdy, the Bones trunk-mounted rack lets you get back to basics. This 3-bike rack features dual, individually adjustable arms and anti-sway straps to keep your bikes stable during transport. The arched base accommodates most spoilers.

Installation Notes:

Designed for vehicles without a spoiler

Do not open trunk while rack is installed

Tech Tip:

2 bike/ 70 lb load limit. Bikes must be located in positions closest to vehicle. Part SA3035 required to replace lower hooks or place inside trunk (details in the instruction manual)

Features:

This fork-mount-style carrier lets you transport 1 road bike on your vehicle's trunk, roof, or glass. The rack installs in seconds with 4 vacuum cups that won't scratch or dent your car. Tail folds up for compact storage.

Features:

This 3-bike trunk rack fits over most factory spoilers and mounts easily with the patented FitDial system. Independently adjustable arms have Hold Fast anti-sway cradles with RDT for safe, stable bike transport. Built-in cable lock deters theft.

Installation Notes:

Place top clips in the gap at the front edge of the top of the trunk, hatch or door.

Lower arm of carrier should be positioned on upper tier of bumper.

Set lower clips/hooks in tow loop located in the center of the vehicle behind the bumper.

Features:

This 3-bike trunk rack features a QuickTrigger hub system for easy setup on your vehicle. The adjustable arms help to keep bikes level. StableCradle anti-sway cradles with removable ChainStraps allow for easy bike loading. Folds flat for storage.

Installation Notes:

Place the upper strap hooks at the top edge of trunk, hatch lid, or rear door

Outer/Lower support frame rests on the lower portion of the license plate, below the numbers

Place the lower strap hooks at the bottom edge of the trunk, hatch lid, or rear door

Side strap hooks to back side edge of trunk, hatch, or rear door next to tail lights

Features:

This trunk-mounted bike rack has premium RDT anti-sway cradles, adjustable arms for level bike transport, and the patented FitDial system with ratcheting cables for easy setup on your vehicle. Integrated locks secure bike to rack and rack to car.

Installation Notes:

Place top clips in the gap at the front edge of the top of the trunk, hatch or door.

Lower arm of carrier should be positioned on upper tier of bumper.

Set lower clips/hooks in tow loop located in the center of the vehicle behind the bumper.

Features:

This lightweight, aluminum bike rack lets you transport 2 bikes on your vehicle's trunk. It has premium anti-sway cradles with ratchet straps, adjustable arms for level bike transport, and 6 nylon straps that secure the rack to your vehicle.

Features:

Lightweight, easy-to-use rack lets you carry 3 bikes on your trunk. It has individually adjustable arms and anti-sway straps to keep your bikes stable during transport. Arched base with dog leg accommodates most sedan, hatchback and SUV spoilers.

Installation Notes:

Place lower rack feet into license plate well

Do not open trunk while rack is installed

Do not use rear wiper when rack is installed

Upper strap should be placed over the leg

Features:

Lightweight, easy-to-use rack lets you carry 3 bikes on your trunk. It has individually adjustable arms and anti-sway straps to keep your bikes stable during transport. Arched base with dog leg accommodates most sedan, hatchback and SUV spoilers.

Installation Notes:

Designed for vehicles without a spoiler

Do not open trunk while rack is installed

Tech Tip:

2 bike/ 70 lb load limit. Bikes must be located in positions closest to vehicle. Part SA3035 required to replace lower hooks or place inside trunk (details in the instruction manual)

Features:

Let the Sentinel handle safely transporting up to 2 bikes so you can focus on finding the best trails. This sturdy, trunk-mounted rack features adjustable arms and solid cradles with straps to keep your bikes stable.

Installation Notes:

Designed for vehicles without a spoiler

Do not open trunk while rack is installed

Tech Tip:

Part SA3035 is required to replace lower hooks or place lower hooks inside trunk (details in the instruction manual)

Features:

The Gateway 3-bike trunk rack fits over most factory spoilers, and it mounts easily with the patented FitDial system. The independently adjustable dual arms have Hold Fast anti-sway cradles that provide safe, stable bike transport.

Installation Notes:

Place top clips in the gap at the front edge of the top of the trunk, hatch or door.

Lower arm of carrier should be positioned on upper tier of bumper.

Set lower clips/hooks in tow loop located in the center of the vehicle behind the bumper.

Features:

This lightweight, aluminum bike rack lets you transport 3 bikes on your vehicle's trunk. It has premium anti-sway cradles with ratchet straps, adjustable arms for level bike transport, and 6 nylon straps that secure the rack to your vehicle.

Features:

Simple and economical, the Solo is as easy as it gets when it comes to transporting 1 bike on your vehicle's trunk. This compact rack weighs in a mere 2 pounds. Just strap it onto your vehicle, load your bike, and hit the road.

Installation Notes:

Do not open trunk while rack is installed

Do not use rear wiper when rack is installed

Features:

Let the Sentinel handle safely transporting up to 3 bikes so you can focus on finding the best trails. This sturdy, trunk-mounted rack features adjustable arms and solid cradles with straps to keep your bikes stable.

Installation Notes:

Designed for vehicles without a spoiler

Do not open trunk while rack is installed

Tech Tip:

2 bike/ 70 lb load limit. Bikes must be located in positions closest to vehicle. Part SA3035 required to replace lower hooks or place inside trunk (details in the instruction manual)

Features:

This lightweight, aluminum bike rack lets you transport 3 bikes on your vehicle's trunk. It has premium anti-sway cradles with ratchet straps, adjustable arms for level bike transport, and 6 nylon straps that secure the rack to your vehicle.

Features:

This lightweight, aluminum bike rack lets you transport 2 bikes on your vehicle's trunk. It has premium anti-sway cradles with ratchet straps, adjustable arms for level bike transport, and 6 nylon straps that secure the rack to your vehicle.

Features:

This trunk-mounted bike rack has premium RDT anti-sway cradles, adjustable arms for level bike transport, and the patented FitDial system with ratcheting cables for easy setup on your vehicle. Integrated locks secure bike to rack and rack to car.

Installation Notes:

Place top clips in the gap at the front edge of the top of the trunk, hatch or door.

Lower arm of carrier should be positioned on upper tier of bumper.

Set lower clips/hooks in tow loop located in the center of the vehicle behind the bumper.

Features:

This platform-style trunk rack has adjustable clamps and telescoping wheel trays to carry 2 bikes of different sizes. Patented FitDial with ratcheting cables provides easy setup on your vehicle. Integrated locks secure bike to rack and rack to car.

Installation Notes:

Place top clips in the gap at the front edge of the top of the trunk, hatch or door.

Lower arm of carrier should be positioned on upper tier of bumper.

Set lower clips/hooks in tow loop located in the center of the vehicle behind the bumper.

Features:

This fork-mount-style carrier lets you transport 1 road bike on your vehicle's trunk, roof, or glass. The rack installs in seconds with 4 vacuum cups that won't scratch or dent your car. Tail folds up for compact storage.

Features:

This fork-mount-style carrier lets you transport 1 road bike on your vehicle's trunk, roof, or glass. The rack installs in seconds with 4 vacuum cups that won't scratch or dent your car. Tail folds up for compact storage.

Features:

This fork-mount-style carrier lets you transport 1 road bike on your vehicle's trunk, roof, or glass. The rack installs in seconds with 4 vacuum cups that won't scratch or dent your car. Tail folds up for compact storage.