Anti-Sway Bars Specs:
Features:
Minimize sway and driver fatigue by improving the stability and driveability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the rear axle and to the frame to balance weight transfer and reduce body roll.
Installation Notes:
Drilling required for installation
Will work with air bags.
Tech Tip:
Product does not fit on AT4 models.
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and driver fatigue by improving the stability and driveability of your motorhome. Solid, 1-1/2" chromoly bar mounts to the front axle and to the frame to balance weight transfer and reduce body roll. Includes mounting hardware.
Installation Notes:
No drilling required for installation
This replaces the factory sway bar and will reuse the factory end links
More Information >Anti-Sway Bars Specs:
Features:
Minimize sway and improve the stability and driveability of your truck. Solid, 1-1/4" chromoly sway bar provides improved handling and safety. Adjustable anti-sway bar lets you choose level of stiffness. Easy, bolt-on installation.
Installation Notes:
No drilling required for installation
Product is designed for vehicles that have been lifted 2" to 4"
More Information >Videos
for Anti-Sway Bars
Help Articles
for Anti-Sway Bars
Expert Answers
for Anti-Sway Bars
The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to…
view full answer...Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…
view full answer...In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for,…
view full answer...The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148…
view full answer...The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and…
view full answer...For a 2023 Entegra Odyssey 24B on a Ford E-450 chassis you would need the Roadmaster Front Anti-Sway Bar - 1-3/8" Diameter #RM-1139-189 and rear #RM-1139-147. If you also wanted to add in a steering stabilizer then…
view full answer...I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the…
view full answer...We do have that exact lube with the Aqua Lube part #RM-400-011-30.
view full answer...We have the Roadmaster Exact Center Steering Stabilizer part #RM47MR that fits your 2021 Jayco Greyhawk 27U that has an OEM factory damper and would work really well to improve handling.
view full answer...If there isn't a way to access it from the inner side of the frame or from the side then it would have a weld nut in frame and you would be able to just remove the bolt normally. There unfortunately isn't a guide that…
view full answer...For your 2022 Thor Outlaw 29J motorhome on a Ford E450 chassis, the correct steering stabilizer is the Roadmaster Exact Center Steering Stabilizer #RM47MR. I verified the fitment of the #RM47MR directly with Roadmaster for you, and it does come…
view full answer...I checked with Roadmaster, and the correct fit for your 2021 Ford E450 Class C RV is the Roadmaster Exact Center Steering Stabilizer #RM47MR.
view full answer...Filter Products (6)