Can Spring Bars of Equal-i-zer Weight Distribution System Be Upgraded to Increase Capacity
Updated 04/15/2021 | Published 04/13/2021
Products Featured in This Question
Question:
I currently own a Equalizer 10,000/1,000 lb. W/D hitch and like it very much. I upgraded to a larger trailer and my tongue weight is now about 1,400 lbs. My question is, can I upgrade my spring bars to the 1,400 lb. version with my current Equalizer hitch or do I need to purchase the completely new 14,000/1,400 lb. version? And a follow up question, if I do need a new hitch, how does the Curt TruTrack compare the Equalizer both in the 14,000lbs. version? Thank you...
asked by: Juan G
Helpful Expert Reply:
Unlike some weight distribution systems, the weight distribution head of the Equal-i-zer hitches also carries a bar-specific weight capacity so you unfortunately wouldn't be able to increase the weight capacity by just going with a higher rated set of spring bars, as the new bars woldn't be compatible with your existing weight distribution head. You'd need to go with a new system such as the # EQ37140ET 1400 lb system. That being said, you could save a few dollars by reusing your current shank and going with the # EQ37141ET which doesn't include the shank. Either system includes the 2-5/16 inch trailer ball.
The Curt # C17501 Tru Track is rated for trailers with 1000-1500 lbs of tongue weight when fully loaded and ready to tow. The Tru Track is a decent product, but unless you're on a tight budget, I'm confident that you'll be much happier with the quality and performance of the US-Manufactured Equal-i-zer weight distribution system.
I've linked to a demonstration video where my buddy Hayden will walk you through the features of the Equal-i-zer system.
Product Page this Question was Asked From
Replacement Spring Bar for Equal-i-zer Weight Distribution Systems - 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1400 lbs TW
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can the Spring Bars on an Equal-i-Zer WDS Be Swapped Out
- Search Results: equalizer l pin
- Search Results: equalizer ball
- Shop: Replacement Spacer Rivet for Equal-i-zer Weight Distribution Head
- Shop: Pins and Thumb Clips for Equal-i-zer Weight Distribution Spring Bars - Qty 2
- Shop: Replacement Snap-Up Lever for Equal-i-zer Weight Distribution Systems
- Shop: Equal-i-zer High-Performance Lubricant - 4 oz
- Search Results: 90~00~1400
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Replacement Spring Bar for Equal-i-zer Weight Distribution Systems - 1,200 lbs TW
- Shop: Replacement Spring Bar for Equal-i-zer Weight Distribution Systems - 1,400 lbs TW
- Q&A: Replacement Equalizer Weight Distribution Spring Bar for 1,000 lbs Tongue Weight
- Q&A: Do You Sell a Dexter Shackle Kit with 2 Shackles, or a Kit with Shackles that are 2" Long?
- Article: Trailer Jacks
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Q&A: Replacement Part for Kwikee Step Controller # 909506000 Varies by Mfg. Date
- Q&A: Replacement Equalizer Weight Distribution Spring Bars to Increase Capacity
- Q&A: Replacement Hitch Head for Reese Straight-Line 17K Weight Distribution System
- Article: Trailer Couplers
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: What are the Common Types of Propane Fittings Used on RVs?