When your truck's your workspace and your office, every minute counts. You know how much time gets wasted digging through a wet, cluttered bed for the right tool or bit. This box keeps your gear dry, organized, and easy to grab when you need it.Resist Rust and Scratches: Black powder coat keeps the box looking sharp after long days on the road. Specs General: Quantity: 1 toolbox External dimensions: 30" long x 14" tall x 12" deep Internal dimensions: 29-1/2" long x 13-1/2" tall x 10-1/2" deep Construction: Material: 1.2mm steel body, 1.5mm reinforced steel door Finish: black powder coat Latch: locking Eberhard Evolution latch Mount type: surface mount (flatbed, trailer, or truck bed)
Replaces 1 locking toolbox handle latch for DeeZee specialty series underbody toolboxes - steel (DZDB-2600, DZDB-2601, and DZDB-2602).Features: Replaces toolbox handle latch for DeeZee specialty series underbody toolbox Locking, stainless steel T-handle with guide plate provides security for your belongings Specs: Applications: DeeZee Specialty series underbody toolbox - steel - 4.5 cu ft - black (DZDB-2600) DeeZee Specialty series underbody toolbox - steel - 6.75 cu ft - black (DZDB-2601) DeeZee Specialty series underbody toolbox - steel - 9 cu ft - black (DZDB-2602) Overall dimensions: 4-7/8" width x 4-7/8" height from top to tip of "V" Distance between mounting holes: Horizontal: 3-7/8" Vertical: 3-1/4" Recessed section dimensions: 3-3/4" wide x 2-3/4" Quantity: 1 toolbox handle latch and 2 keys
Beef up your gear with a flush-mount T-handle latch built to lock down your load. Stainless steel faceplate, zinc-plated rods, and a rugged cylinder mean secure storage for your toolbox, ATV, UTV, trailer tongue box, or truck.Features: Flush-mount T-handle latch gives your setup a sleek, low-profile look Stainless steel faceplate and T-handle resist corrosion for long-lasting reliability Zinc-plated link rods deliver smooth, sturdy performance you can count on Great for toolboxes, trailer tongue boxes, ATVs, UTVs, and truck or trailer compartments Durable locking cylinder keeps your gear secure wherever the job takes you Specs: Required lock cutout: 2-3/4" x 3-3/4" Latch dimensions: 4-3/4" long x 4-3/4" tall Distance between mounting holes (center to center): 3-3/4" horizontal x 3-1/4" vertical Link rod length: 48" Overall length: When locked: 97-3/4" When unlocked: 96"
Replaces a broken cylinder in your BOLT toolboxlatch or you can change the latch to fit a different ignition key.Features: Replaces the lock cylinder in your BOLT toolboxlatch that codes to Ford key Fits model BL7022698 Can also be used to change the latch to fit a different ignition key Installation requires retaining nut (sold separately) to secure cylinder in place Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
Replaces a broken cylinder in your BOLT toolboxlatch or you can change the latch to fit a different ignition key.Features: Replaces the lock cylinder in your BOLT toolboxlatch that codes to Ford Side-Cut key Fits model BL7023550 Can also be used to change the latch to fit a different ignition key Installation requires retaining nut (sold separately) to secure cylinder in place Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
Replaces a broken cylinder in your BOLT toolboxlatch or you can change the latch to fit a different ignition key.Features: Replaces the lock cylinder in your BOLT toolboxlatch that codes to Dodge key Fits model BL7022699 Can also be used to change the latch to fit a different ignition key Installation requires retaining nut (sold separately) to secure cylinder in place Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
In order to replace the Dexter 023-359-00 left hand and 023-360-00 right hand braking assemblies you will want to use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465 which will replace both sides and it's a direct bolt-on…
It sounds like you have a spring return Bulldog landing gear jack that has a broken spring and now won't retract when you activate the release lever. I spoke to my contact at Bulldog and he said the springs aren't repairable so you would need…
Hey Bill thanks for the information. The C865H-9/16 in that axle tag number means you have 8 on 6-1/2 hubs with 9/16" lug studs. The Hydrastar item #HSE7K-T1, you were looking comes with 1/2" lug studs. You'll need the Hydrastar Disc…
Hey Joe, welcome back! I'm not entirely sure where our 15" measurement came from but you will be able to add your 13" diameter tank to the inside of the #3371701385. The front to back measurement is 16.16" and then the lip will…
Hi Randy! We haven't done an install on a 2025 Ram1500 yet, but it looks like the plug you want is either to the right of the steering wheel or just to the right of the emergency brake (I couldn't find a definitive answer saying which spot).…
Hey Don, welcome back! The Under-Bed Rail and Installation Kit #RP67KR for your 2024 F-350 matches the OEM prep package. You are not limited to Reese 5th wheel hitches. This can be used with the B&W Companion #BWRVK3300 and #BWRVK3305 or slider…
I spoke with my contact at B&W regarding the Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit #BWGNRK1116 referenced in your question. She stated that the estimated/average installation time for this kit is around 2 hours.…
When using the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part #e27SR with the Single-Axle Trailer Hanger Kit for Double-Eye Springs part #APS4 you will need to space the leaf spring hangers 25-3/4" apart.
Hi Charles, While we don't currently offer the inner member that you're needing for the UFP A-70 we do offer a compatible replacement with the Dexter DX7.5L A-60 Brake Actuator #DX33FR. This is the entire actuator assembly along with the…
Your 2016 Isuzu NPR will need a weld-on trailer hitch, and there are a couple of options from Draw-Tite, which is the same manufacturer as Reese hitches. Based on my research, a '16 NPR has a 33-1/2 inch chassis width, so you can choose from…
You can use a pulley block like part #BDW20005, to pull your car on to a trailer with the winch being offset. You will want to make sure the winch is well secured for safety. This pulley block has a capacity of 17,000 lbs break strength and is…
Replaces a broken cylinder in your BOLT toolboxlatch or you can change the latch to fit a different ignition key.Features: Replaces the lock cylinder in your BOLT toolboxlatch that codes to early-model GM key Fits model BL7022696 Can also be used to change the latch to fit a different ignition key Installation requires retaining nut (sold separately) to secure cylinder in place Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
Replaces a broken cylinder in your BOLT toolboxlatch or you can change the latch to fit a different ignition key.Features: Replaces the lock cylinder in your BOLT toolboxlatch that codes to Nissan key Fits model BL7023548 Can also be used to change the latch to fit a different ignition key Installation requires retaining nut (sold separately) to secure cylinder in place Limited lifetime warranty Notes: BOLT locks permanently code to only 1 vehicle.
This retrofit latch kit for your toolbox has a lock that codes to your ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.Features: Replaces the factory latch on your truck-bed tool box Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT cylinder Turn the key once Lock is permanently coded to your key Heavy-duty lock cylinder has security features Plate tumbler sidebar prevents picking or bumping Locks automatically when key is removed Weatherproof, automotive-quality, stainless-steel construction Stainless steel lock shutter keeps out dirt and moisture Paddle-style handle lifts easily Kit includes handle, frame, latch, cylinder, and hardware for installation Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
This retrofit latch kit for your toolbox has a lock that codes to your ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.Features: Replaces the factory latch on your truck-bed tool box Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT cylinder Turn the key once Lock is permanently coded to your key Heavy-duty lock cylinder has security features Plate tumbler sidebar prevents picking or bumping Locks automatically when key is removed Weatherproof, automotive-quality, stainless-steel construction Stainless steel lock shutter keeps out dirt and moisture Paddle-style handle lifts easily Kit includes handle, frame, latch, cylinder, and hardware for installation Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
Replaces a broken cylinder in your BOLT toolboxlatch or you can change the latch to fit a different ignition key.Features: Replaces the lock cylinder in your BOLT toolboxlatch that codes to center-cut GM key Fits model BL7023547 Can also be used to change the latch to fit a different ignition key Installation requires retaining nut (sold separately) to secure cylinder in place Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
Replaces a broken cylinder in your BOLT toolboxlatch or you can change the latch to fit a different ignition key.Features: Replaces the lock cylinder in your BOLT toolboxlatch that codes to Toyota key Fits model BL7023549 Can also be used to change the latch to fit a different ignition key Installation requires retaining nut (sold separately) to secure cylinder in place Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
Replaces a broken cylinder in your BOLT toolboxlatch or you can change the latch to fit a different ignition key.Features: Replaces the lock cylinder in your BOLT toolboxlatch that codes to Ford key Fits model 7040477 Can also be used to change the latch to fit a different ignition key Installation requires retaining nut (sold separately) to secure cylinder in place Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
This retrofit latch kit for your toolbox has a lock that codes to your vehicle's ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.Features: Replaces the factory latch on your truck-bed tool box Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT cylinder Turn the key once Lock is permanently coded to your key Heavy-duty lock cylinder has security features Plate tumbler sidebar prevents picking or bumping Locks automatically when key is removed Weatherproof, automotive-quality, stainless-steel construction Stainless steel lock shutter keeps out dirt and moisture Paddle-style handle lifts easily Kit includes handle, frame, latch, cylinder, and hardware for installation Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
Replaces a broken cylinder in your BOLT toolboxlatch or you can change the latch to fit a different ignition key.Features: Replaces the lock cylinder in your BOLT toolboxlatch that codes to late-model GM key Fits model BL7022697 Can also be used to change the latch to fit a different ignition key Installation requires retaining nut (sold separately) to secure cylinder in place Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
This retrofit latch kit for your toolbox has a lock that codes to your ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.Features: Replaces the factory latch on your truck-bed tool box Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT cylinder Turn the key once Lock is permanently coded to your key Heavy-duty lock cylinder has security features Plate tumbler sidebar prevents picking or bumping Locks automatically when key is removed Weatherproof, automotive-quality, stainless-steel construction Stainless steel lock shutter keeps out dirt and moisture Paddle-style handle lifts easily Kit includes handle, frame, latch, cylinder, and hardware for installation Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
This retrofit latch kit for your toolbox has a lock that codes to your ignition key. Corrosion-resistant lock is made of automotive-grade materials and is nearly impossible to pick or bump.Features: Replaces the factory latch on your truck-bed tool box Lock uses your vehicle's ignition key - you'll always have the right key with you Insert your ignition key into the BOLT cylinder Turn the key once Lock is permanently coded to your key Heavy-duty lock cylinder has security features Plate tumbler sidebar prevents picking or bumping Locks automatically when key is removed Weatherproof, automotive-quality, stainless-steel construction Stainless steel lock shutter keeps out dirt and moisture Paddle-style handle lifts easily Kit includes handle, frame, latch, cylinder, and hardware for installation Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
... BOLT is actively working on a replacement lock cylinder for BOLT toolboxlatches that codes to Toyota center-cut keys. We'll update info as we get it. Preorder now for quickest deliver.Features: Available for preorder Replaces the lock cylinder in your BOLT toolboxlatch that codes to Toyota center-cut key Can also be used to change the latch to fit a different ignition key Installation requires retaining nut (sold separately) to secure cylinder in place Limited lifetime warranty Note: BOLT locks permanently code to only 1 vehicle.
Replaces the full latch assembly for your etrailer trailer tongue tool box (e64VV or e44VV). Includes 2 keys.Features: Replaces a latch assembly on your etrailer trailer tongue toolbox with square paddle handle Works with tool boxes e64VV or e44VV Includes latch body and paddle handle, lock cylinder core, and 2 keys Features: etrailer trailer tongue box: e44VV and e64VV
70" Long x 14-1/2" tall x 20" deep; 8.4 cubic feet; 3" height above bed rails; standard box with foam filled lid and paddle lift handles; low-profile top; aluminum construction - matte black finishThe toolbox sits just 3" above the truck bed rails instead of the standard 4," providing a better view out the back window for maneuvering or keeping an eye on your load.
63-7/8" Long x 12" wide x 9-1/4" deep; 3.4 cubic feet; narrow box with foam filled lid and paddle lift handles; aluminum construction - black finishFeatures: Crossover, saddle-style toolbox hangs from the truck bed rails behind the cab Aluminum construction with fully welded seams - guaranteed not to rust Heavy-duty stainless steel latches on both sides, with lock on driver's side Black powder coating Best base finish for painting color to match the truck Connecting rod enclosure - prevents box contents from bending or jamming the locking system Beveled RigidCore lid provides exceptional durability while preventing warping and bending Built from extra-thick aluminum plates filled with hardened foam Resists binding while opening and closing and allows gas struts to operate smoothly Gasket runs the length of the entire box and keeps out water, dust, and mud Heavy-duty gas cylinders help to lift lid and hold it open a full 90 degrees Piano hinge runs full length of lid Contains divided tray for tools J-bolt installation hardware included Made in the USA Specs: Dimensions: 63-7/8" long x 12" wide x 9-1/4" high Add 1" to above dimensions to figure clearance for the lid Capacity: 3.4 cu ft of usable space 0.058" Aluminum tub Lock includes 2 keys Limited lifetime warranty UWS Slim Line Series offers full-size features for smaller truck beds by using the limited space in front of the wheel well.
24" Long (front) 49" Long (rear) x 21" tall x 18" deep; 6.3 cubic feet; trailer box with foam filled lid and paddle lift handle; aluminum constructionFeatures: Storage box designed to maximize typically unused space on your trailer Aluminum construction with fully welded seams - guaranteed not to rust Stainless steel lock and latch in front Beveled, notched chest lid features: RigidCore lid provides exceptional durability while preventing warping and bending Built from extra-thick aluminum plates filled with hardened foam Resists binding while opening and closing and allows gas struts to operate smoothly Gasket runs the length of the entire box and keeps out water, dust, and mud Heavy-duty gas cylinders help to lift lid and hold it open a full 90 degrees Piano hinge runs full length of lid Specs: External dimensions: 49" long x 21" tall x 18" deep Length in front: 24" Length in front: 24" External depth with lid open: 20" Add 1" to above measurements to allow for lid Capacity: 6.3 cu ft of usable space Construction: 0.058 aluminum tread plate Lock includes 2 keys Limited lifetime warranty The Trailer Box is great for A-frame-style trailers such as utility, camping or lawn-maintenance trailers.
20" Long (front) 34-1/2" Long (rear) x 22" tall x 17" deep; 4.1 cubic feet; trailer box with foam filled lid and paddle lift handle; aluminum constructionFeatures: Storage box designed to maximize typically unused space on your trailer Aluminum construction with fully welded seams - guaranteed not to rust Stainless steel lock and latch in front Beveled, notched chest lid features: RigidCore lid provides exceptional durability while preventing warping and bending Built from extra-thick aluminum plates filled with hardened foam Resists binding while opening and closing and allows gas struts to operate smoothly Gasket runs the length of the entire box and keeps out water, dust, and mud Heavy-duty gas cylinders help to lift lid and hold it open a full 90 degrees Piano hinge runs full length of lid Specs: External dimensions: 34-1/2" long x 22" tall x 17" deep Length at front: 20" External depth with lid open: 18" Add 1" to above measurements to allow for lid Internal dimensions: 19" long x 20" tall x 12-1/4" deep; Internal height to bottom of tray: 16" Capacity: 4.1 cu ft of usable space Construction: 0.058 aluminum tread plate Lock includes 2 keys Limited lifetime warranty The Trailer Box is great for A-frame-style trailers such as utility, camping or lawn-maintenance trailers.
Filters
