Recommended Replacement For A UFP Model A-70 Brake Actuator
Updated 04/23/2024 | Published 04/22/2024
Products Featured in This Question
Question:
I am replacing a UFP Model A-70. It slides into the housing on a swing away tongue. I need to know what part number to get. I do not need the whole bolt on kit, just the part that slides into the housing.
asked by: Charles W
Expert Reply:
Hi Charles,
While we don't currently offer the inner member that you're needing for the UFP A-70 we do offer a compatible replacement with the Dexter DX7.5L A-60 Brake Actuator # DX33FR. This is the entire actuator assembly along with the mounting sleeve. If you have an electric lockout out to back up without having to manually lockout the actuator then I recommend picking up the Solenoid Valve # T4748800 as well.
Product Page this Question was Asked From
Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Electric Lockout
- Manual Lockout
- Dexter
more information >
Continue Researching
- Search Results: trailer brake hoses
- Search Results: brake hose
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Video: Review of Dexter Brake Actuator - A-60 Brake Actuator 7500 LBS - DX77FR
- Shop: Replacement Inner Member for Dexter DX7.5L Brake Actuator - Drum - 2" Ball - 7,500 lbs
- Search Results: brake actuator
- Search Results: trailer brakes
- Search Results: rubber brake hose
- Search Results: a70
- Search Results: dexter a75
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Female and Male Inverted Flare - 18"
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Video: Replacement Inner Member for Dexter DX7.5L Brake Actuator: The Breakdown
- Shop: Dexter DX7.5L A-60 Brake Actuator with Fill Cap - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs
- Q&A: Should Trailer Brakes All be Changed to Free-Backing
- Shop: Dexter Surge Brake Actuator - Disc - Elec Lockout - 2" Ball - Zinc - 7.5K - 3" x 5"
- Shop: SwingKing Bolt-On Swing Tongue Kit - 3x4 - Galvanized
- Q&A: Replacement Trailer Actuator for UFP A-70
- Video: Replacement Inner Member for Dexter DX7.5L Actuator Spec Review
- Q&A: Replacement Solution for Fulton Swing Away A60 Drum Brake Actuator
- Q&A: Can I Replace a UFP A-70 Surge Brake Actuator w/ the Replacement Inner Member for Dexter DX7.5L?
- Video: Review of Swing King Folding Trailer Tongue - Coupler Hinge Kit - TD53FR
- Q&A: Replacement for Dexter A-60 Brake Actuator
- Video: Review of etrailer Trailer Brakes - Hydraulic Drum Brake Kit - AKFBBRK-35-D
- Q&A: Possible Replacement Grease Seal Recommendation for a Shorelandr Trailer Using a 174253TB Seal
- Q&A: Replacement Inner Member for 2004 Nitro Bass Boat Brake Actuator
- Video: Dexter DX7.5L A-60 Brake Actuator Review
- Video: Breaking Down the Hydraulic Trailer Brake Kit
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Shop: Lift Assist
Charles
4/23/2024
I contacted etrailer by phone and was told that the DX39FR was a replacement since I only have brakes on one axle. I ordered this yesterday. Based on your response, I am hoping it fits.