Video Transcript for An In-Depth Look at the Replacement Lock Cylinder for BOLT Toolbox Latch

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Bolt replacement toolbox latch lock cylinder. This is going to replace the lock cylinder in your Bolt toolbox latch. That's gonna code to the late model GM keys. This will fit with the model that you see on the screen there. So if you are needing to switch out that original core, whether the original has become damaged or because the bolt locks are permanently coated to only one vehicle key and cannot be recoded or re-keyed, if you are switching to a different vehicle, and you wanna use a different ignition key, you can switch out the core here so that you can get that key set up to work with your toolbox latch.

The installation is going to require a nut that is sold separately. You can find it here etrailer using that part number that you see on the screen there, and that's going to allow you to get the cylinder secured in place. This does come with a limited lifetime warranty, so if you we're to have any issues with it, you're more than welcome to reach out to us. But because this is a direct replacement from Bolt, then you can trust it is gonna be compatible with the rest of your setup. No worries about fit issues or anything like that.

So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.