Video Transcript for Ultimate Overview of the Replacement Lock Cylinder for BOLT Toolbox Latch

Speaker 1: Today we are going to take a look at the replacement lock cylinder for the bolt toolbox latch and it's from codes to the Dodge key.Now this part will work with the Chrysler Dodge Jeep vehicles. What I would recommend if you need to find out the vehicle this will work on is go to the product page of this part number and at the very bottom of the page it will have a list of vehicles that it will work on.Now you can use this replacement locks cylinder to replace a broken bolt cylinder in your toolbox latch or you can change it out to fit a different ignition key. This lock will use your vehicles ignition key so you'll always have the right key with you and the way you coded to the lock is you just insert your ignition key into this both cylinder. Turn the key once and then the lock is permanently coded to the key.This does offer a six plate tumbler sidebar to prevent any picking or bumping of the lock and it is a weatherproof, automotive quality construction. It uses a stainless steel lock shutter to keep out any dirt and moisture from the cylinder and as I mentioned it will lock automatically when the key is removed.One note I do want to mention is that the bolt locks permanently code to only one vehicle so they cannot be recoded or re-keyed. But that should do it for the review on the replacement lock cylinder for the bolt toolbox latch that codes to the Dodge key..