Heading to the lake at first light, you want your trailer ready to roll. This side-mount carrier gives your spare a secure spot on the tongue, out of the way but right where you need it if a flat happens.This side-mount carrier bolts to your trailer tongue, giving the tire a permanent home that's out of the way but near where you'll need it when a flat happens.
Flats happen fast. This sidemount carrier keeps your spare on the tongue where you can grab it quickly. The hot-dip galvanized finish keeps the hardware from seizing up so the swap is quick and you're back on the road.Side-Mount Advantage: Mounting on the tongue keeps the tire out of the way but easy to reach, without eating into your trailer's deck space.
Flats happen fast. This sidemount carrier keeps your spare on the tongue where you can grab it quick. Heavy steel with a zinc finish holds it tight, even around saltwater, so your spare is ready when you need it most.Side-Mount Advantage: Mounting on the tongue keeps the tire out of the way but easy to reach, without eating into your trailer's deck space.
Use this compact red LED as a clearance light, side marker light, or both when properly mounted. Its sealed construction is a good fit for marine trailers, and the included grommet and wiring plug give you what you need for installation.Highlights Covers 2 Lighting Functions: PC-rated light works as both a clearance and side marker when properly mounted. Handles Marine Trailer Use: Sealed lens and housing help protect the internal components. Sits Recessed in Your Trailer: Grommet-mount design keeps the light tucked into the mounting surface.
Replace or add an amber clearance and side marker light on your trailer. This submersible LED light is PC rated, DOT compliant, and includes the grommet and plug for installation.Fits Multiple Lighting Positions: PC-rated design works as a front, rear, or side marker light when properly mounted. Uses Less Trailer Power: LED lighting delivers bright amber output with lower power draw than incandescent bulbs.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when drop leg is released Drop leg helps bridge the gap to the ground Works as a powered jack when used with an 18V or 24V, cordless, non-impact drill (not included) Included drill adapter attaches to jack in place of handle and eliminates need to manually crank Resists rust and corrosion, even in areas with salt Wrinkled black powder coat finish has a 700-hour salt spray rating Zinc-nickel inner and outer tubes Won't shake, rattle, or overheat during operation Durable, precision-machined tubing limits rattle Composite gears dissipate heat Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Can be used as manual jack with included, sidewind handle Offers a comfortable rubber grip Easily removes for storage so you can use the drill adapter Lasts for years thanks to durable steel construction Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around the trailer frame Includes mounting hardware Specs: Application: trailer frames up to 6" tall x 6" wide Installation requires 5" of clearance along the trailer frame Lift capacity: Manual: 1,800 lbs With drill: 900 Support capacity: 7,000 lbs Bracket height (from center of top bracket hole to the ground): Retracted: 13-5/8" Extended: 40-15/16" Lift: 13-5/8" Drop leg adjustment: 13" Total adjustment: 26-5/8" Adjustment hole spacing on drop leg: 3-7/16" from center of hole to center of hole Clearance: 16-1/2" from mounting bracket to top of jack Inner tube dimensions: 2" x 2" Outer tube dimensions: 2-1/4" x 2-1/4" Gear ratio: 3:4 1-Year limited warranty Drill Powered Operation When you're hitching up before a long day of work, or putting away your trailer before turning in for the night, you want to be able to do it with as little effort as possible.
Yes, a blade fan can be used in an RV. It is the fitment, diameter and height that is important. A 5 blade fan is considered to run more quietly than 4 blades. We carry the 42" RV Ceiling Fan with Light Kit in Oil Rubbed Bronze, #277-000115.…
So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
8-5/8" LED light displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome and has a replaceable lens. It wires to your RV with the included pigtail harness.Features: Rectangular RV brake, turn, and tail light Glows for tail light Brightens for brake light Flashes for turn signal LED with red lens More efficient and durable than incandescent bulb ABS plastic base and replaceable acrylic lens Surface mount with bracket (sold separately) Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger's side (right-hand side) Driver's-side light: RVSTLB0061 (sold separately) Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" thick Compatible with 12V DC systems Diodes: 1 Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Tail light: 0.01 amps Lifetime warranty on LEDs
Transport a propane tank on the side of your SUV, truck, or trailer with this side-mount propane tank holder. Hinged brackets hold tanks from 8-5/16" to 11-3/8" in diameter. ... Features: Mounting system secures your propane tank to the side or rear of your SUV, truck, or trailer Works with tanks from 8-5/16" to 11-3/8" in diameter Swing-away brackets adjust to accommodate different tanks Rubber bumpers on brackets and base plate prevent movement and reduce rattle Stainless steel safety latch keeps tank secure Small accessory lock deters theft (sold separately) Mounts to the side or rear of your vehicle or trailer with included hardware - requires drilling Black powder-coated steel resists corrosion Specs: Dimensions: 14" long x 11-1/2" wide x 8" tall Weight: 9.9 lbs 3-Year warranty
5-15/16" Low-profile RV light displays brake, tail, and turn signals on the passenger side. It mounts on the surface of your motorhome and hardwires to the RV with the 3-wire pigtail.Features: Low-profile brake, tail, and turn signal light for RVs Glows for tail light Brightens for brake light Flashes for turn signal White LEDs with red lens More efficient and durable than incandescent bulbs ABS plastic base with acrylic lens Surface mount Hardware not included 3-Wire pigtail hardwires to trailer DOT compliant Specs: Configuration: passenger side Driver side: RVSTL11 (sold separately) Light dimensions: 5-15/16" diameter x 1-5/16" thick Compatible with 12V DC systems Diodes: 6 Power draw at 12.8 volts: Stop/turn: 0.421 amps Tail: 0.114 amps Lifetime warranty on LEDs
Ensure your trailer is clearly visible and meets safety regulations with this amber side marker light. It fits a 3/4" grommet and features a 9" wire tail for easy, low-profile installation.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the front corner of your trailer to act as both.
... ONE Series provides bright light using fewer diodes than other LEDs. Surface mount with built-in license plate bracket. 3-Wire pigtail.Features: Rectangular RV tail light serves 4 functions Stop light, tail light, turn signal light, and license plate light Built-in license plate bracket allows easy mounting of license plate ONE Series provides bright light using fewer diodes than other LED lights Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable white ABS plastic base Red acrylic lens can be easily replaced Clear lens for license plate light Mounts on surface of trailer - hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Configuration: driver's side (left-hand side) Passenger's-side light (RVSTL0060) sold separately Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" deep Height with license plate bracket: 5" Power draw at 12.8 volts: Stop/turn signal light: 0.34 amps Tail light: 0.094 amps Quantity: 1 Lifetime warranty on LEDs
8-5/8" RV light displays brake, tail, and turn signals on the passenger side. It mounts to the surface of the motorhome and wires to the RV.Features: Rectangular RV brake, turn, and tail light White LED with red lens More efficient and durable than incandescent bulbs White ABS plastic base and acrylic lens Surface mount Hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger's side (right-hand side) Driver's-side light: RVSTL0061 (sold separately) Light dimensions: 8-5/8" long x 3-3/16" tall x 2-1/4" thick Power draw at 12.8 volts: Stop/turn signal light: 0.32 amps Tail light: 0.01 amps Lifetime warranty on LEDs
Ensure your trailer is visible and compliant with this red side marker light. It fits into a 3/4" grommet and includes a 9" wire for easy, low-profile installation.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the front corner of your trailer to act as both.
1-1/2" x 3/4" Oval. Waterproof mini LED can be both a side marker and clearance light. Uses adhesive backing to stick to your trailer as well as a tabbed grommet. Plug-in installation with 0.180" bullet connectors.Features: Oval mini side marker and clearance light PC-rated light is equally visible from the front and the side Waterproof - great for boat trailers White LED with amber lens More efficient and durable than incandescent bulbs Polycarbonate housing and lens Adhesive backing sticks light to trailer Tabbed grommet holds light in place 0.180" Male bullet connectors plug into your trailer's matching connectors Specs: Dimensions: 1-1/2" long x 3/4" tall x 5/8" thick Cutout required: 1/2" Grommet: 3/8" diameter Compatible with 12V DC systems Diodes: 1 Power draw at 12.8 volts: 0.12 amps Lifetime warranty on LED
1-1/2" x 3/4" Oval. Waterproof mini LED can be both a side marker and clearance light. Uses adhesive backing to stick to your trailer as well as a tabbed grommet. Plug-in installation with 0.180" bullet connectors.Features: Oval mini side market and clearance light PC-rated light is equally visible from the front and the side Waterproof - great for boat trailers White LED with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and lens Adhesive backing sticks light to trailer Tabbed grommet holds light in place 0.180" Male bullet connectors plug into your trailer's matching connectors Specs: Dimensions: 1-1/2" long x 3/4" tall x 5/8" thick Compatible with 12V DC systems Diodes: 1 Power draw at 12.8 volts: 0.065 amps Lifetime warranty on LED
2-1/2" Diam x 1-1/16" D; PC-rated; corrosion resistant; replaceable lens and bulb; surface mount on 1-1/2" centers; 1-wire; 1-bulb incandescent2-1/2" Round Trailer Clearance and Side Marker Light - Red This sealed, round light can be used as a clearance or side marker light. This PC-rated light functions as both a marker and clearance light when mounted properly at a 45 degree angle.
Bright, efficient, engineered in the USA LED solutions durable, waterproof lighting for trucks, trailers, emergency rigs, boats designed for performance and peace of mind.Features: Powered by 7 high quality LEDs UV resistant, dust and waterproof TecSeal urethane potting material guarantees circuit board protection Exterior lighting grade polycarbonate provides excellent UV resistance Specs: Measurements: 6-1/2" x 2-1/4" x 1-1/2" LEDs: 7 Color: Amber Voltage: 9 to 14 volts DC Mounting: Surface mounted Connector: Tripole Lifetime warranty TecNiq offers a breakaway from traditional designs with a true mid ship turn signal and side marker.
Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This red light can function as a rear side marker or clearance light. PC rated. 7-1/2" Long pigtail.Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.
A cracked or faded red marker light is an easy way to get pulled over or fail inspection. This LED replacement mounts in place of old incandescent units and keeps the rear or side of your trailer clearly marked.Highlights Stay Legal And Visible: Red LED handles rear or side marker and clearance duties. PC Rated Dual Function: Mount on a 45 degree corner to serve as both marker and clearance light. Bright Output, Lower Draw: 16-diode design uses less power than incandescent lamps.
Mid-ship signals that stand out. This slim surface-mount marker handles bright turns and low-dim running, stays sealed against weather, and installs with a simple pigtail so your rig stays visible from the middle on long hauls.Features: Mid-ship turn signal/side marker with California mid-turn design Surface-mount body fits standard mounting holes IP68 rated - dustproof and waterproof UV-resistant, automotive-grade polycarbonate lens TecSeal urethane potting protects the circuit board Reliable performance rated over 100,000 hours 9" pigtail for straightforward wiring Wire colors: White - Ground, Red - High/Turn, Black - Low/Dim Specs: Dimensions (surface mount): 7-1/2" L x 3-5/16" W x 1-5/8" D Voltage: 9-14 VDC Current - Bright: 0.25 A - 0.34 A Current - Dim: 0.04 A - 0.05 A Pigtail: 9" Mounting: Surface mount; fits standard mounting holes LED color: Amber Ingress rating: IP68 Construction: UV-resistant polycarbonate; TecSeal urethane potting Service life: rated over 100,000 hours Warranty: Lifetime warranty TecNiq offers a breakaway from traditional designs with a true mid ship turn signal and side marker.
Dim or dead amber lights make your trailer harder to see from the front and sides. This LED upgrade replaces older incandescent fixtures and helps keep your rig visible, compliant, and ready for the next trip without constant bulb swaps.Highlights Stay Visible Up Front: Amber LED handles front, rear, or side marker and clearance duties. PC Rated Dual Function: Mount on a 45 corner to serve as both marker and clearance light. Bright Output, Lower Draw: 16-diode design uses less power than incandescent lamps.
When traffic packs in, this mid-ship light makes your lane changes obvious - bright 7-LED turn plus a low marker glow - all in a sleek, sealed housing that shrugs off road spray and sun so you can tow with confidence.Features: True mid-ship turn signal/side marker (T90 series) Amber lens 7 high-quality LEDs; operates on 9-14V DC TecSeal urethane potting for guaranteed circuit board protection IP68 rated - dustproof and waterproof Automotive exterior lighting grade, UV-resistant polycarbonate Reliable performance rated for over 100,000 hours Breakaway design with sleeker lines and a more elegant form Grommet mount Wiring pigtail included Specs: Measurements: 6-1/2" x 2-1/4" x 1-1/2" LEDs: 7 Color: Amber Voltage: 9 to 14 volts DC Mounting: Grommet mount into standard hole Connector: Pigtail Lifetime warranty TecNiq offers a breakaway from traditional designs with a true mid ship turn signal and side marker.
Replace a worn or broken trailer marker light with this red incandescent clearance/side marker light. Stud-mounted light grounds through the mounting stud and includes a 24" lead wire.Highlights Restores Trailer Visibility: Red marker light replaces a worn or broken clearance light. Road-Ready Marker Position: Marks the side or rear of your trailer for DOT-compliant lighting. Simple Stud Ground: Mounting stud grounds the light when installed on a metallic surface.
Bright, efficient, engineered in the USA LED solutions durable, waterproof lighting for trucks, trailers, emergency rigs, boats designed for performance and peace of mind.Features: Powered by 7 high quality LEDs UV resistant, dust and waterproof TecSeal urethane potting material guarantees circuit board protection Exterior lighting grade polycarbonate provides excellent UV resistance Specs: Measurements: 6-1/2" x 2-1/4" x 1-1/2" LEDs: 7 Color: Amber Voltage: 9 to 14 volts DC Mounting: Grommet mount into standard hole Connector: Tri-pole Lifetime warranty TecNiq offers a breakaway from traditional designs with a true mid ship turn signal and side marker.
Filters
