Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Old incandescent bulbs burn out fast and eat up power. This TecNiq Mini Side Marker Light uses an amber LED that’s rated for over 100,000 hours of use. With a current draw of just 0.06–0.09 amps at 9–14V DC, it gives off bright, clear light while keeping energy use low. That means better visibility and less time worrying about replacing bulbs.
When space is limited, this light fits where others won’t. At just 1" in diameter and 5/8" deep, it’s half the depth of a standard 3/4" light—perfect for tight or recessed mounting spots. It installs with a standard 3/4" grommet mount and includes a 9" wire lead for simple setup, so you can keep your trailer lighting clean and low-profile.
Water, dust, and vibration can ruin a light fast, but this one’s ready for it all. The lens and housing are sealed together as a single unit and filled with TecSeal urethane potting that protects the internal circuitry from moisture intrusion. The IP68 rating means it’s fully submersible and completely dustproof—ideal for trailers that see rain, road grit, or even boat launches.
Visibility from every angle keeps you safer on the road. This PC-rated light meets FMVSS 108 standards and shines across a full 180° beam pattern—90° to each side of centerline. Mount it at a 45° angle on a trailer corner and it functions as both a clearance and side marker light, giving broad coverage that helps other drivers see you day or night.
This light doesn’t just perform well—it’s built to last. The sealed polycarbonate lens resists UV damage and impact from debris or rocks on the road. Once installed, it stays clear and bright through years of use, keeping your trailer lighting reliable trip after trip.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a quick look at this TecNiq amber mini side marker light. Now you're going to be able to keep your trailer visible and compliant with this compact amber LED side marker light. This is designed to fit a standard 3/4 of an inch grommet and it's going to give you a sleek, low profile look with this about 9-inch long wire tail for quick and easy installation. Now, obviously you can see it plugged into my power source right now and you see how bright it is with my bright serial lights turned on. Let me go ahead and turn those off though, just give you a better demonstration here.
I'm going to shine this on the wall behind me, kind of give you an idea there of just how bright this little light's going to be. And then giving you a close up here, despite its small size, just half the depth of a standard 3/4 of an inch light, this is going to pack plenty of performance and durability. This light is built for long lasting reliability. I'm going to go ahead and turn my studio lights back on. This has a sealed polycarbonate lens that's going to resist impact and UV damage, plus the IP68 rated waterproof instruction is going to keep out dust and moisture.
And inside is textile urethane potting. That's going to protect the circuitry, ensuring dependable operation even when submerged. So this light's going to be perfect for both trailers and utility setups. It's going to be rated for over 100,000 hours of use. It's a light you're going to be able to install and basically just forget, set it and forget it.
And this is a PC rated light, meaning it emits light at a 180 degree arc, making it visible from both the front and sides. So that means that you're going to be able to mount it at a 45 degree angle on your trailer's front corner to serve double duty as a side marker and clearance light. This is going to meet all FMVSS 108 standards. And so this amber LED is going to be a smart, space saving upgrade that's going to keep your trailer both safe and street legal. And I did want to mention here that it does come with that grommet as well.
If you have any other additional questions, whether it's about this light or anything else that we carry, don't hesitate to reach out to us. We wanna make sure that you're getting exactly what you want and need. Well, again, my name is Andy. Thank you for joining me.
Ratings & Reviews
Nick S.
12/1/2025
That is great to hear! I am glad the process was easy and I hope the install was as well. It looks great on your vehicle!
Mike L.
2/18/2026
The pigtail wires are 16-gauge which is typical. Hope that helps!!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
4/30/2026
We're glad to hear that, good job!