Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Yep; since you have a 2-1/2 inch hitch receiver and you need at least 10 inches of drop, the correct weight distribution shank that will fit your hitch and also give you the correct amount of drop is indeed from Equal-i-zer, and is the following…
view full answer...I recommend the Equal-i-zer Weight Distribution #EQ37121ET for towing your 2022 Palomino Puma travel trailer with your 2020 Ram 2500 Power Wagon. This hitch is rated for trailers with a tongue weight of 800-1,200lbs and total trailer weight up to…
view full answer...We have a weight distribution shank with quite a bit of drop that will work your Fastway e2 weight distribution hitch, but the part number you mentioned will not because it is a standard ball mount and doesn't have the correct hole spacing.…
view full answer...No, it does not but there are a couple of options to make them work with a 2-1/2" receiver. The Blue Ox SwayPro Weight Distribution item #BXW1006 and item #BXW1000 are only sold with 2" shanks. The least expensive option is to use the Curt…
view full answer...In order to determine if you need to add additional lift spacers to the Air Lift LoadLifter 5000 Air Helper Springs on your Ford F-250 you will need to measure the distance between the upper and lower airbag brackets, then subtract the height of the…
view full answer...You definitely need a shank with more drop than what you currently have. Most likely the part #FA92-02-4315 would give you the amount drop you'd need as it has ability to provide up to 9-3/4 inches of drop but you'd want to first determine…
view full answer...You did not mention if your 2013 Chevy Silverado was a 1500, 2500, or 3500 so I can provide recommendations for all 3. For a 1500 I recommend Curt trailer hitch #14301. There is no drilling or trimming required for installation of this hitch. I have…
view full answer...The max drop the #FA92-02-4315 that you referenced can do is 8 inches. Since you need right at 6 inches of drop to tow your trailer level this shank would work well for you. I attached a help article link on selecting the correct rise/drop ball mount…
view full answer...To determine the correct Fastway weight distribution system for your setup you need to find your total tongue weight. You need to determine your trailer's loaded, and ready to tow tongue weight and combine it with the amount of weight you have…
view full answer...We have had customers let us know that using the Equal-i-zer Weight Dist Shank #EQ90-02-4600 has allowed them to tow their trailers with their tailgates down as shown in the included pictures so you should have no issues even when turning. Keep in…
view full answer...I assume you want to lower your tailgate with the trailer hooked up? If that's the case, I don't recommend a hitch extension as they reduce capacity and add another failure point. That said, what you can do is switch to a longer weight…
view full answer...To install the etrailer Trailer Hitch Receiver #e73ZR on your 2019 Jeep Cherokee Trailhawk you will need the following tools. Torque Wrench #ALL944001 capable of 139lb-ft torque Ratchet Set #PT64VR with 13mm, 15mm, 21mm, and 3/4" sockets,…
view full answer...Related Searches
Filter Your Search
Contact and Help