... This electric jack does the heavy lifting with a push of the switch, and the foot plate helps keep you steady on soft soil or gravel so you can settle in and relax.Ready for the Road: Bolt-on design, included hardware, and back-up handle get you set up with less hassle. Foot Plate Stays Stable: Keeps your trailer steady on gravel, grass, and sand. Features to know about Push a Button, Make Setup Easy You remember all those mornings spent fighting with a manual jack, hands sore and energy running low before the day even started?
Step on the dual-pin foot lever on this heavy-duty jack to use the drop leg hands-free - makes up half the total travel. Best for gooseneck setups where you can step between the truck and trailer. ... Features: Easy-to-use foot lever faces the front - no more bending, squatting, or muddy knees Use the drop leg completely hands-free Drop leg extension makes up about half of the total travel Works best if you have open space between your trailer and your truck Heavy-duty internal components Durable jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Black powder coated finish on inner and outer tubes Footplate minimizes sinking in soft ground Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes footplate, handle, and connecting pin Specs: Lift capacity: 12,000 lbs Support capacity : 20,000 lbs Total travel: 26-1/2" Screw travel : 13-1/2" Drop leg travel : 13" Overall height (from bottom of foot to top of jack): Retracted: 29-1/2" Extended: 56" Outer tube width: 4-3/8" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 2-1/2" on center Jack screw diameter: 1-1/4" 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
You do not have to press the bearing in place when installing. You can use a dowel to tap it into place, this will help prevent damage to the bearing when installing. What's great about the Nev-R-Lube bearing #31-71-3 is that you do not have to…
The Curt Flat Plate Gooseneck #C65500 is a multi-fit application that can be used on a cab and chassis truck. Typically, the plate would be placed on top of the flat bed over the rear axle. The Universal Rail Kit, part #C61502 can be used to provide…
The Replacement Sidewind Handle #TJD-7000S-HD you're looking at does have a 1/2" diameter so it could work well for you if it matches what you're needing. I'm attaching a few dimensions photos for your reference as well!
There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…
Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…
The best way to keep a breakaway battery charged while not in use is to use the Solar Battery Charger part #PTW2997. The Solar Battery Charger is perfect for the situation you described as the trailer will be outside and you don't have to worry…
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
We do have a replacement for your 10-47 seal. The seal you are looking for is the #9103309. This is the Dexter seal number 010-047-00 which we have confirmed to be identical.
The 2015 Ford Fiesta ST is the hatchback model, and we have a trailer hitch is confirmed to fit. You would need the Curt Trailer Hitch Receiver #C11067. The accompanying photo is of a hitch on a Fiesta; I have also added a link to an install video so…
I'll start off by addressing the installation, and a lot of this depends on your mechanical ability. I would say that as long as you're comfortable turning a wrench, the installation of a winch mount like the Bulldog Winch Mounting Plate…
Your arm stalls mid-crank with a loaded tongue. Been there. This A-frame jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. You raise and lower smoothly without fighting the handle, and hitching doesn't drag on.Corrosion-Resistant Steel Construction: Keeps working through rain, road salt, and sun with e-coated and powder-coated steel. Stable Footing on Uneven Ground: Set the jack on gravel, grass, or sand without sinking using the round removable foot plate. SnapPad Compatible Foot Plate: Works with the 6" round SnapPad (sold separately - MN6SP1) to increase ground contact.
Your arm stalls mid-crank with a loaded tongue. Been there. This swivel bolt jack lifts up to 2,000 lbs and accepts a 3/4" socket so a drill can do the work. It pivots up for clearance, and hitching doesn't drag on.The jack uses a round removable foot plate for base support and works with a 6" SnapPad (sold separately) to increase contact at the ground. With that added footprint, the jack stays planted on gravel, grass, or sand while the trailer remains supported during loading and while it sits unhitched.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.The jack uses a round removable foot plate for base support, and the Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot locks onto that foot to increase the contact area at the ground.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb swivel jack uses a drill adapter so the lift happens without the handle. It pivots up for clearance, and the SnapPad stays planted on soft ground.The jack uses a round removable foot plate for base support, and the SnapPad locks onto that foot to increase the contact area at the ground. With that added footprint in place, the jack stays planted on gravel, grass, or sand while the trailer remains supported during loading and while it sits unhitched.
... This electric jack does the heavy lifting with a push of the switch, and the drop leg and foot plate help you get level fast so you can settle in and relax.Built to Last: E-coat and black powder coat help prevent rust and corrosion for the long haul. Foot Plate Stays Stable: Keeps your trailer steady on gravel, grass, or sand. Features to know about Easy Setup, Anytime You remember all those mornings spent fighting with a manual jack, hands sore and energy running low before the day even started?
You pull in after a long drive, the ground looks fine, and you don't want to wonder if the jack will sink or a block will shift once everyone steps inside. This kit puts a wide drop leg and SnapPad under your jack, giving it a solid, steady base.Highlights Stops the Jack from Sinking: Large 6" foot spreads the load across dirt or grass for even weight distribution. Steadier When Parked: Wide foot and included SnapPad create a wider 7-1/4" base when people walk inside.
Replaces the 2" x 2" drop leg and footplate from your etrailer or Ram square, direct-weld trailer jack with a 7,000-lb capacity. Designed for TJD-7000 Series jacks.Features: Replaces the drop leg and foot from your etrailer or Ram square, direct-weld jack with a 7,000-lb capacity Designed for use with TJD-7000 Series jacks Offers an additional 13-1/2" of travel Durable zinc finish resists corrosion Specs: Tubing dimensions: 2" x 2" Footplate dimensions: 8" long x 6" wide Distance between adjustement pin holes center to center: 3-3/8" Overall height: 17-3/4"
Replaces the foot for your etrailer or Ram electric jack (EJ-3520-BBX or EJ-3520-WBX).Features: Replaces the foot for your etrailer or Ram electric jack (EJ-3520-BBX or EJ-3520-WBX) Quantity: 1 replacement foot
Thin factory jack feet are usually the first weak link in your camper's landing gear. When they bend or sink, these 12" steel pads swap in for the original feet, adding a wider footprint and built-in articulation for uneven ground.Breakaway Design Helps Reduce Damage It only takes one hidden curb, rock, or raised edge to put a jack system in a bind. When a rigid foot meets an immovable object, something's gotta give, and that 'something' is often your hydraulics or frame. These pads are designed to detach first, sacrificing the foot instead of forcing that shock into components that cost far more to repair.
Thin factory jack feet are usually the first weak link in your camper's landing gear. When they bend or sink, these 9" steel pads swap in for the original feet, adding a wider footprint and built-in articulation for uneven ground.If you don't have SnapPads yet, compatible options are available here on our site (SP54FR, sold separately). Specs Application: Replaces Equalizer 10" square foot pads Quantity: 2 Pads Dimensions: 9" x 9" x 1-11/16" Weight: 9.5 lbs Construction and Color: Foot material: 1/4" plate steel Color: black Warranty: Limited lifetime
Replaces a foot pad for your Lippert Components hydraulic ground control leveling system.Features: Replaces a foot pad for your Lippert Components hydraulic ground control leveling system Includes foot pad, o-rings, washer, and bolt Foot pad diameter: 9"
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 9" round jack foot.Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 9" round jack foot Diameter: 11" Weight: 5 lbs 2-Year limited warranty
Filters
