Trailer Hitch Fit For 2015 Ford Fiesta ST Hatchback

Updated 08/26/2019 | Published 08/25/2019

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(65)

$179.02

Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs

(2328)

$31.99

1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs

(333)

$34.81

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs

(333)

$39.87

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2273)

$32.39

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(50)

$43.99

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2932)

$2.87

Question:

I own a 2015 Fiesta ST and was wondering about fitment with the OEM rear splitter. I am pretty sure some cutting would be necessary. I am also curious about approximate receiver height. Trailer pulled will be apprx 1000 lbs, with a 100 lb tongue weight. Thanks.

asked by: Marty M

Expert Reply:

The 2015 Ford Fiesta ST is the hatchback model, and we have a trailer hitch is confirmed to fit. You would need the Curt Trailer Hitch Receiver # C11067. The accompanying photo is of a hitch on a Fiesta; I have also added a link to an install video so you can see exactly what you'll need to do. The only trimming you'll need to do is a 2" section of the heat shield which means there is no fascia trimming needed at all.

Since you mentioned you will be towing there is a specific ball mount you will need, the Curt Class II Drawbar # C45521 is recommended for the Curt hitch. You will also need the Pin and Clip # F-4. For a hitch ball you can use 1-7/8" Hitch Ball # A-80 or 2" Hitch Ball # A-82 depending on the size of your trailer's coupler.

Finally, you will also need wiring to power your trailer's lights and for a 2015 Ford Fiesta ST hatchback the compatible wiring harness is the Curt T-Connector Vehicle Wiring Harness # C56191. I have added a link to a video showing this harness being installed on a '15 Fiesta ST for you to take a look at.