Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces a foot pad for your Lippert Components hydraulic ground control leveling system.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff from etrailer.com. Today we're going to take a look at this Replacement Foot Pad for the Lippert Components Hydraulic Ground Control Leveling System, and it is for a quantity of one foot pad. This will replace the foot pad on your Lippert Components Hydraulic Ground Control Leveling System. It does include everything shown here on the table. The foot pad, it comes with the bolt, the washer, and it's two rubber O rings. Now the bolt size issues is a five eighths by 18 fine thread bolt size.
The foot pad diameter, if we take a ruler, if we go on the diameter of this it's going to be right at nine inches. But that should do it for the review on this Replacement Foot Pad for the Lippert Components Hydraulic Ground Control Leveling System.
Haven't installed but just received and it appears heavy duty and same as standard Lippert foot pad.
Fast shipping and well packaged.
I ordered one hydraulic jack foot pad etrailer and one from lippert at the same time on 08/09/24. I received yours a day early on 08/15 and the other one just shipped from Lippert. It's pretty obvious who cares more about their customers. I will be using etrailer exclusively for parts from now on.
Rob W.
8/16/2025
The hydraulic leveling jack foot is still working perfectly
Exact replacement for the factory Lippert foot pads on my RV. Easy to change as well. My two factory front ones were bent and so loose I could take them off by hand, so I’m glad I got these to replace them and make sure they are tight.
These are under engineered for the jacks on my Diesel pusher class A. These were the OEM pads. I called Lippert and they can’t event tell me the load rating for these. They dish within a couple of uses when I use them on level concrete pads. I can’t recommend them. If you are using the rubber snap pads they dish even faster. After replacing three of them I’m done. I’m going to have a couple pads custom made. If you use them on loose gravel they will crumple.
These foot pads are too thin to support weight of a diesel pusher. They bend easily! Aside from that, they have a slight curvature that makes them incompatible with RV Snap Pads. I tried them with Snap Pads, followed all the directions, and ended up losing 3 of the 4 pads. RV Paws are much better. They are thicker, absolutely flat and work well with Snap Pads.
Prompt service, helpful and knowledgeable staff, fast delivery, easy to work with, east to install, good product: all very positive . Picture us the old, broke and way better>> the new one. We replaced both back pads.
Gwendolyn Y.
5/2/2025
I can see the difference, Ron! Out with the old and in with the new!
Exactly what I needed to replace the damaged steel feet on my leveling jacks. the old one were bent on the used coach I bought, and these allowed me to easily install Snap-Pads on the jacks.
Brooke M.
3/10/2025
Happy to hear that, Mark! Its nice you can use Snap Pads - they are awesome! Where are you headed next with the newly acquired RV?
Unfortunately these are under engineered for heavier rigs. If you have a diesel pusher and have these pads on the rear they will bend/dish within the first couple of uses. Soft jack pads make the situation worse. If you want to use a soft jack pad be prepared to mechanically attach them or they will eventually fall off as these pads begin to dish after repeated use. I’ve been through 4 of these, the two rear OEM and the two replacements I purchased here. They bend even when used in concrete spaces. I think it’s because the steel isn’t strong enough and the weight of the rig is focused on the center nipple. When the center nipple has a heavy rig pushing down on it the pad dishes. Bottom line is, the jacks handle the weight of my rug no problem. They can easily lift the rig but these will dish. Poorly designed. Having said that my front two pads are just fine. If you have a lighter rig you should be fine.
They are going to do the trick, I have paired them up with SnapPads.
Frank
5/6/2025
These guys work well. I had installed snap pads on them and lost one of those a few weeks ago, but the Lippert foot pads are still going strong!
As someone else said, the o rings do not work right. There is no play in the plate, and the bottom one appears to go through the hole. I am going to try the bottom old rubber and use the o rings on top.
Perfect fit and is equal to the original part.
I had to use an impact to remove and install bolt as cylinder shaft would just spin when a wrench was used I used blue lock tight to secure the bolt
Holding up well, replaced to facilitate using a new set of Snap Pads. No mushrooming yet!
Arrived 4 days ago and I have been excited about getting them on. Great product and great prices plus fast shipping
Thank you
The foot pad installed easily enough. However, the o-rings provided allowed for no flexing of the footpad. Fearing that this would result in another bent foot pad when I tried leveling on an uneven surface, I used the original hardware which had a much larger rubber washer and a metal bushing rather than a washer. This provided much more flex. I haven't tried leveling yet, but the new footpad is behaving like the other three on my motorhome.
Perfect fit and very fast shipping
This used rig that I purchased eveidently had some hard times on the foot pads because 2 of them were really bent and the 2 new ones are working really well.
Missin tracking information
Delivery...poor. To NJ, then NY for2 days, on to FL for 2 days, back to NJ onto DE 2days then to me.Got to love USPS.
Ordering was easy and delivery was in time. During installation, I had a question and the representative helped me. I recommend etrailer for your rv and trailer needs.
Perfect fit looks to be OEM, easy installation less than 5 minutes.
Price and delivery were great. However, these foot pads are not robust enough for the 24K - 26K class A motorhomes. I have recently upgraded to four (4) RV Paws at the beginning of this season (March '25)
Fast shipping and easy to install.
The shipping was faster than i thought it would be, and the replacement foot pad was an exact replacement for the one I damaged. So this order worked out perfect and i have no complaints.
Victoria H.
3/13/2025
Yay, sounds like everything went seamlessly for you Tyler!
Great professionalism,
Timely shipping. Very satisfied customer
Easy to install and an exact replacement for my missing foot.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
9/29/2025
All good and still solid after a year.