Durable rubber, jaw-style clamps with adjustable straps help you store and transport shovels, axes, high lift jacks, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair.Installation of High Lift Jacks You may also install your high lift jack using three QuickFist clamps spaced evenly along the steel bar of the jack. 1. Drill out a hole in the QuickFist clamp with a 7/16" (12 mm) bit.
Durable rubber, jaw-style clamps with adjustable straps help you store and transport shovels, axes, high lift jacks, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair.Installation of High Lift Jacks You may also install your high lift jack using three QuickFist clamps spaced evenly along the steel bar of the jack. 1. Drill out a hole in the QuickFist clamp with a 7/16" (12 mm) bit.
Durable rubber, jaw-style clamps with adjustable straps help you store and transport fishing rods, small flashlights, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair.A new QuickFist clamp fresh out of the mold can be stiff. Use two hands to open the jaws vertically and then pull each jaw once or twice. Close the jaws and open and close the strap a couple of times.
... Includes 2 brackets and reducer sleeves that fit 1" to 2" diameter roll bars and 2 Original QuickFist clamps.Note: QuickFist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.True Course (C94VV - sold separately) prevents sway Tire Linc (C54VV - sold separately) monitors tire pressure and temperatue Quick Tip: The Bluetooth PIN for initially pairing to your smart device is located in the quick reference guide! Note: If Bluetooth connection is lost, the brake controller will continue to function safely, using the most recently programmed settings.
Durable rubber, jaw-style clamp with an adjustable strap helps you store and transport a fire extinguisher, air tank, nitrous tank, and more. It mounts horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL.If desirable, excess sections can be trimmed of with wire cutters or scissors. 20020 Super QuickFist Clamp
We've dealt with the rattles, the clanks, and the frustration of constant swaps, so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.Fits Most 2" Hitch Receivers: Works with standard 2" hitches for towing, hauling, or mounting gear. Quick-Swap Convenience: Change hitch accessories without tools or removing the anti-rattle collar. Always Ready: Stays on your hitch so you're not reinstalling hardware or digging through the garage.
Durable rubber, jaw-style clamp with adjustable strap helps you store and transport fuel bottles, small fire extinguishers, and more. It mounts horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL.A new QuickFist clamp fresh out of the mold can be stiff. Use two hands to open the jaws vertically and then pull each jaw once or twice. Close the jaws and open and close the strap a couple of times.
These sturdy mounting brackets let you install various QuickFist clamps (sold separately) on your vehicle's roll bar, bull bar, or roof rack. Includes hardware for a hassle-free installation of mounting brackets and QuickFist clamps.Features: Brackets mount on roll bars, roof racks, and bull bars Works with various QuickFist clamps (sold separately): QuickFist Original Clamps (QF10010) QuickFist Super Clamps (QF20020) QuickFist Mini Clamps (QF30050) QuickFist 3" Clamps (QF50050) QuickFist Ratchet Clamps (QF70070) Heavy-duty glass-filled nylon conctruction Quick and easy installation Stainless steel mounting hardware included Made in the USA Specs: Application: roll bars, roof racks, or bull bars of 1", 1-1/2", 1-3/4", or 2" diameter Mounting area: 6" x 7/8" (152 mm x 22 mm) Includes: 2 roll bar mounts (2) 1-3/4" snap-in inserts (2) 1-1/2" snap-in inserts (2) 1" snap-in inserts 2 rubber smooth-surface grip inserts 8 sets of stainless steel bolts and nuts 1-Year limited warranty Note: QuickFist roll bar mounts are not to be used on any part of a roll bar that is higher than the back of the front seat.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH12) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16", and 16-1/2" Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for you.
Heavy-duty ratchet strap clamp lets you secure a flashlight, fire extinguisher, or other equipment in your vehicle or on a wall. Strap tightens with less than 1 full turn of ratchet dial and releases with the press of a lever. 2,000 lb max load.Features: Heavy-duty ratchet clamp secures tools and other equipment in your vehicle or on your wall Ratchet dial lets you easily tighten strap around gear - takes less than 1 full turn Release lever allows for quick and easy equipment removal Roll bar mounts (QF90050 - sold separately) let you attach ratchet clamp to a roll bar Horizontal or vertical mount with (3) #10 bolts or screws (not included) Durable glass-filled nylon base with polyester strap that resists fraying Made in the USA Specs: Carrying capacity: 1/2" to 8" diameter objects Strap dimensions: 1-1/2" wide x 36" long Safe working load limit (WLL): 500 lbs Maximum load (break strength): 2,000 lbs Distance between mounting holes (center to center): 2-1/2" 5-Year limited warranty Note: Tie-down straps must be chosen according to their safe working load limit (WLL).
This heavy-duty tow bar is easy to maneuver, with a swivel head joint that lets the arms twist left and right. Non-binding levers let you disconnect at the campsite, even on rough terrain. Extra-long arms help you make tight turns.Features: Safely bring your heavy vehicle along behind your RV Easy hookup with arms that smoothly extend and pivot to reach the base plate Swivel head joint allows the tow bar to twist left and right Arms automatically lock into towing position when you pull forward Extra-long arms help you make tight turns Quick disconnect, even on rough terrain, with non-binding levers Extra-secure connection to the base plate with triple-lug brackets Convenient storage on the back of your RV Push arms up and then fold them to the right or left Coiled safety cables won't drag as you tow Vinyl-coated for longevity Spring-loaded latches prevent the hooks from disconnecting Heavy-duty steel construction is powder coated to resist corrosion Rubber sleeves protect inner arms from dirt and debris Made in the USA Specs: Fits: Blue Ox, etrailer, and Demco base plates Can be used with Roadmaster base plates with adapter (sold separately) Application: 2" x 2" trailer hitch receivers Arm length (from center of hitch pin hole to center of base plate pin hole when lined up with arm straight): Extended: 52" Retracted: 42-1/4" Weight capacity: 10,000 lbs Safety cable length: 7' Rated at 10,000 lbs Weight: 45 lbs 3-Year warranty Fits Roadmaster Base Plates with Adapter Base Plate Adapter Roadmaster Standard: RM-033 Crossbar-Style: RM-032 or BX88178 Direct-Connect: BX88185 Easy Hookup with Telescoping Arms and Swivel Head Joint The arms on the Avail are designed to make hooking up super easy.
Durable rubber, jaw-style clamps with adjustable straps let you store and transport 1 rifle, shotgun, or assault rifle in your vehicle. Clamps hold your gun by the stock and barrel or forend. 100 lbs WLL.There are no complicated buckles, keyed locks, or padlock combinations to deal with. QuickFist weapon clamps are made of strong, durable rubber that withstands the elements. These 1-piece, molded rubber clamps have no metal parts that will corrode.
Durable rubber, jaw-style clamps with adjustable straps helps you store and transport items up to 15" in diameter such as cans, tanks, or coolers. Permanently install on your vehicle, trailer, wall, or any flat surface. 300 lbs WLL per pair.If you are tightening a rectangular piece of equipment, you will need to push the "ladder" half as far as possible while keeping the "jaw" section flat. 60060 QuickFist Extra Large Clamp - Qty Two
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.Use the quick-splice connectors to attach the input wires of the tail light converter to the corresponding wires from your vehicle. Once you've spliced in the converter, connect the included hot lead to the black wire and run it up to your car battery.
Durable rubber, ladder-style clamps help you store and transport gear such as cords, fire extinguishers, and jacks. Mount horizontally or vertically to your vehicle, trailer, wall, or any flat surface. 120 lbs WLL per pair.The QuickFist long arm clamps can easily hold multiple tools, things with a handle (such as dollies), power cords, fire extinguishers, or high lift jacks.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease.
Clamp kit with 4 Original clamps, 2 Mini clamps, and 2 Super clamps lets you transport and organize tools and equipment. The clamps mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. Rubber construction.Features: Works great on emergency vehicles, work trucks, off-road vehicles, military vehicles, ATVs, and boats Uses: Mount small cylindrical tools like fishing rods and AA-battery flashlights with the mini QuickFist clamp Mount cylindrical hand tools like shovels, axes, D-battery flashlights, and high lift jacks with the original QuickFist clamp Mount a fire extinguisher, air tank, nitrous tank or other tools that are 2.5" to 9.5" in diameter with the QuickFist super clamp Quick and easy installation QuickFist mini clamp mounts with one #10 screw, bolt and washer, or 4 sheet metal screws and washers (sold separately) through the holes on the four corners of the pad QuickFist original clamp mounts with one #10 bolt or screw (sold separately) QuickFist super clamp mounts with three #10 bolts or screws (sold separately) Heavy-duty transportation-grade rubber Unaffected by climate UV-resistant Made in the USA Specs: Diameter of objects: QuickFist mini clamp holds objects from 5/8" to 1-3/8" (15.748 to 33.02 mm) in diameter QuickFist original clamp holds objects 1" to 2.25" (25 mm to 57 mm) in diameter QuickFist super clamp holds objects from 2.5" to 9.5" (64 mm to 240 mm) in diameter Safe working loads: QuickFist mini clamp supports a safe working load of 25 lbs (11 k) QuickFist original clamp supports a safe working load of 25 lbs (11 k) QuickFist super clamp supports a safe working load of 50 lbs (23 k) Quantity: 2 QuickFist mini clamps, 4 QuickFist original clamps, and 2 QuickFist super clamps 1-Year limited warranty Note: QuickFist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels.Features: Self-adjusting brakes let you maintain optimal braking power at all times Ensures reliable contact between the brake shoes and drums Prevents uneven wear on brake shoes Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Automotive-grade brake pads offer superior quality, smooth operation, and excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Tapered edges on pads minimize stuttering and brake lockup Adjuster plugs (included) protect internal components from dirt, grime, and road debris E-coat on backing plates fends off rust Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH10B) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and AL-KO/Hayes Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 13", 14", and 15" Axle rating: 3,500 lbs Limited 1-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for you.
Whether you're driving, off hiking, or relaxing at camp, you'll always know what's behind your RV. Rear camera helps you navigate blind spots while changing lanes on the highway or backing into a tight space - and records video at night.Need help backing into your campsite? Rear park assist marker lines guide you right into place. Quick Installation Without Complicated Wiring This setup comes with 2 monitor stands, a cigarette lighter charger, and a USB-C power cable.
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and nuts included.Features: Marine-grade trailer hub assembly fits idler axles Bearings, races, seal, grease cap, and lug nuts are included Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Galvanized finish offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Wheel size: 13" to 15" Bolt pattern: 5 on 4-1/2" Wheel stud dimensions: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" E-Z Lube and Easy Grease-Compatible Hub for Simple Lubrication The grease cap on this hub is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease.
LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakaway battery stays charged and ready to go in case a disconnect ever occurs.Yellow shows it's currently charging, and red indicates a low battery. Quick Tips: When you store your trailer, be sure to keep the pin plugged into the breakaway switch. If the pin's removed for an extended period of time, dirt and moisture can get into the switch and cause corrosion that could keep it from activating when you need it.
Get improved handling with minimal sway and body roll for your vehicle with this suspension enhancement kit. Stainless steel StableLoad pads feature quick-disconnects and a hinged design so you can easily return to your original ride when not towing.As a result, you won't have to fill the bags nearly as full, which means that they won't take as much of the load off of your factory suspension, thus allowing your suspension to function as designed - only better. Quick Disconnect These StableLoads can be quickly and easily engaged and disengaged. The quick-disconnect design allows you to pivot the wedge pack - the piece that sits between the springs - in and out of position with a standard ratchet and 3/8" extension (not included).
Filters
