Durable rubber, jaw-style clamp with adjustable strap helps you store and transport fuel bottles, small fire extinguishers, and more. It mounts horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL.
Features:
Specs:
Note: Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).
A new Quick Fist clamp fresh out of the mold can be stiff. Use two hands to open the jaws vertically and then pull each jaw once or twice. Close the jaws and open and close the strap a couple of times. It's now ready for mounting.
For applications where the Quick Fist clamp will be used at or near its maximum opening dimension, the clamp will not work in your hand, as it must be bolted to a fixed surface for the rubber to stretch properly.
Mount your fire extinguishers and fuel bottles using the Quick Fist 3" clamp.
1. Using the template above, drill 3 x 1/4" (6 mm) holes. The outer two holes need be about 1/8" (3 mm) deep. The two protrusions on the base will keep the clamp from turning while in use. Use a 1/4" bolt or screw and a washer to mount the Quick Fist clamp. Do not over-tighten.
2. Mount with the strap facing in any direction.
3. To clamp: put the nozzle between the jaws and push the strap to reach the desired tightness. Repeat as necessary.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at the Quick Fist 3 Inch Clamp, part number QF50050. These clamps are designed for use with fire extinguishers, fuel tanks or any other round 3 inch product that you may need to hold in place. The clamp is designed to hold objects that range from 2 3/4 of an inch all the way to 3 1/4 inches. Each clamp supports a safe working load of 50 pounds. Very easy to mount. You've got a single mounting hole here.
We'll use a 1/4 bolt or a screw and a washer to hold into place. This Quick Fist Clamp is made in the United States and it offers a one year limited warranty. The material that they use to make it out is a very heavy duty transportation grade rubber. This is going to be unaffected by any kind of climate. So, cold, hot, it won't matter.
It also is resistant to UV rays and salt. This is our mounting hole here. I'm going to go ahead and mount it onto our trailer, so you can see how it looks, but I want to tell you about these little nibs that stick out. These are designed for wallets and used to keep it from pivoting side to side. We'll go ahead and show you how it installs. Essentially, you'll just want to find the point that you're going to use.
We want to be careful not to over-tighten as to pull our washer or a bolt or a screw through the rubber. As you can see there, it's nice and secure. It's not going anywhere and very hard to get it to pivot, because of those nibs that are in contact with our 2X6. Now, we'll go ahead and load up some gear and show you how it works. Today, we're going to be using our super top secret documentation here. Basically, what you'll do, work your item into your clamp.
What we'll do is we'll take our catch and we'll bring it over and line it up into one of the grooves here that are designed for holding it. With our documents secure here, we're going to be ready to head down the road and that will complete today's look at the Quick Fist 3 Inch Clamp, part number QF50050. .
Average Customer Rating: 4.4 out of 5 stars (7 Customer Reviews)
Durable rubber, jaw-style clamp with adjustable strap helps you store and transport fuel bottles, small fire extinguishers, and more. It mounts horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL.Excellent product, we ordered several to secure those small fire extinguishers in our work vehicles. No more flimsy plastic or metal brackets that either break, or when you replace the extinguisher find out the old bracket won't work. Put them in every truck and piece of equipment, done deal 337508
I ordered the smaller fist clamps first to put on my cart to carry the electric chain saw and the tree trimmer but I needed this larger one for one end of the chain saw that was wider. It worked very well. I also used the smaller ones on the back of my tool carrier on the 4 wheeler to carry the weed wacker. I am very happy because it makes my yard work easier to do so I don't have to lug them around with me. Would definitely recommend them! 908624
Tough as a ten penny nail. I use these to secure my YETI drink tanks, fire extinguisher bottle, axe and shovel in my JEEP. These are very versatile and much less expensive than the dedicated mounts that are offered for just the YETI products alone. 905760
Worked great to hold the telescoping pole for my cell phone booster. allowed me to store it in my front compartment. 863959
Product has worked perfectly for my crews needs. Tools are now securely hung out of the way. I would definitely recommend these! 657431
Product is fine. Service was terrible. I received notice clamp was not in stock and wouldn't be shipped for another month. I called to cancel and had to leave a message. A few days later I received notice the product had been shipped! I had already ordered from another source who actually stocked product and had it to arrive in three days. I now have an extra. 413972
Love them they are all working fine 351760
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.