1. Tie Down Straps
  2. Quick Fist
  3. Tie Down Clamp
  4. Trailer
  5. 0 - 175 lbs
Quick Fist Original Clamps - 1" to 2-1/4" Inner Diameter - Rubber - 25 lbs Each - Qty 2

Quick Fist Original Clamps - 1" to 2-1/4" Inner Diameter - Rubber - 25 lbs Each - Qty 2

Item # QF10010
lowest price pledge
Our Price: $10.93
You Save: 60%
Tie Down Straps
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.32 lbs
In Stock
QF10010 - Tie Down Clamp Quick Fist Tie Down Straps
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Durable rubber, jaw-style clamps with adjustable straps help you store and transport shovels, axes, Hi-Lift jacks, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair. Lowest Prices for the best tie down straps from Quick Fist. Quick Fist Original Clamps - 1" to 2-1/4" Inner Diameter - Rubber - 25 lbs Each - Qty 2 part number QF10010 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (116)
  • Q & A (10)
  • Photos
  • Why etrailer?

Quick Fist Tie Down Straps - QF10010

  • Tie Down Clamp
  • Quick Fist
  • Trailer
  • 0 - 175 lbs

Durable rubber, jaw-style clamps with adjustable straps help you store and transport shovels, axes, Hi-Lift jacks, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair.


  • Works great on emergency vehicles, work trucks, off-road vehicles, military vehicles, ATVs, and boats
  • Quick and easy installation
    • Mounts with one #10 bolt or screw (sold separately)
  • Heavy-duty transportation-grade rubber
    • Unaffected by climate
    • UV-resistant
  • Made in the USA


  • Holds objects 1" to 2.25" (25 mm to 57 mm) in diameter
  • Each clamp supports a safe working load of 25 lbs (11 k)
  • Mounting area: 2-1/2" x 3/4" (64 mm x 19 mm)
  • Quantity: 2 clamps
  • 1-Year limited warranty

Note: Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).

A new Quick Fist clamp fresh out of the mold can be stiff. Use two hands to open the jaws vertically and then pull each jaw once or twice. Close the jaws and open and close the strap a couple of times. It's now ready for mounting.

For applications where the Quick Fist clamp will be used at or near its maximum opening dimension, the clamp will not work in your hand, as it must be bolted to a fixed surface for the rubber to stretch properly.

Mount your shovels, axes, D-battery flashlights, and high lift jacks with the Quick Fist original clamp

Mount your shovels, axes, D-cell flashlights, and high lift jacks with the Quick Fist original clamp.


Illustration showing Quick Fist mounting

1. Use #10 bolt or screw to fasten. Do not over-tighten.

2. Mount with the strap facing in any direction.

3. To clamp: put the tool or implement into the jaws. With both of your thumbs on the strap, push strap to reach the desired tightness. Repeat as necessary.

4. For certain applications, like roof racks with round tubing, you can install the Quick Fist clamps using hose clamps. Make sure you center the hose clamp on the plastic washer to avoid cutting into the rubber clamp.

5. For smaller diameter objects, push jaw without strap inside the other jaw and tighten strap on top of jaw.

Installation of High Lift Jacks

Illustration showing installation of high lift jack

You may also install your high lift jack using three Quick Fist clamps spaced evenly along the steel bar of the jack.

1. Drill out a hole in the Quick Fist clamp with a 7/16" (12 mm) bit. Use a 2-1/2" (65 mm) long, 3/8" (10 mm) bolt to attach the clamp.

2. To mount the jack, hold it parallel to the three clamps. Put one end of the jack into a Quick Fist clamp, with the bolt through the steel bar, and then loosely lock the clamp. Next, place the steel bar into the other two clamps and lock. After all three clamps are holding the jack, tighten as necessary.

10010 Original Quick Fist Clamp - Qty Two

Installation Details QF10010 Installation instructions

Customer Reviews

Quick Fist Original Clamps - 1" to 2-1/4" Inner Diameter - Rubber - 25 lbs Each - Qty 2 - QF10010

Average Customer Rating:  4.8 out of 5 stars   (116 Customer Reviews)

Durable rubber, jaw-style clamps with adjustable straps help you store and transport shovels, axes, Hi-Lift jacks, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair.

- QF10010

I installed these clamps to hang an axe in my converted utility trailer and they are perfect. Work as expected. Only reason I didn’t give then 5 stars is because they didn’t come with bolts or screws.

- QF10010

Perfect solution for what I needed. Couldn't find anything close to this anywhere else online including Amazon. Using this to hold my folding dock ladder in place when it is out of the water. Good Quality. Thick, Flexible and strong.

- QF10010

Great product, would buy again.

- QF10010

The clamps have been mounted on my roof rack for over a a year exposed to the elements while holding a shovel. They still look new!

- QF10010

Excellent iteam I use them on the tailgate of my Yamaha viking utv for my Shovel and axe , one of the best I used over the years very sturdy and strong even in -35 labrador weather.

Still holding strong even in -30 weather and snow
Curtis M - 11/04/2020

- QF10010

I made a rack for the ATV to hold my axe and shovel, the clamps seem to work pretty good so far. They are kinda hard to open and close in cold weather, (below 25 F.) They claim to be good for 1" diameter, but they don't clamp as well as I would like, so I am going to get a bigger diameter handle to get a better grip. Overall I like them so far.

Ive had these on for over a year now, and they still work great! Been on sub-zero weather and over 90 degree weather and keep working and performing great!
MtMan - 12/11/2017

- QF10010

After searching the web for weeks, I was ecstatic to find these hooks! I'm sure I'm not using them for the purpose intended, but they look great holding my axe on the wall. My only gripe is that there is only one way to secure it to the wall. I'm sure at dead center is the optimal spot for mounting, but perhaps consider adding so diagonal screw holes on either side, that's where I ended up putting my screws in. Other than that the product easily exceeded expectations!

Thanks for taking the time to check-in. The product is still working as it should, and I am still as grateful as ever that I was able to find it on your site. Should I ever need another one, I know where to go. Thank you for the quality product and for the excellent customer service
Javonte - 03/25/2019

- QF10010

Used these Quick Fists to mount same hand tools to the ROPS on my tractor. Works great

- QF10010

Works great. Used them to attach a long aluminum pole to a swinging gate. Previous arrangement allowed pole to dislodge, fall to the ground - and a couple times sustain damage when crushed by a heavy truck. The pole has remained in-place since installing the Quick Fist Clamps. Very happy - clamps perform as advertised.

- QF10010

These are excellent for shovels, flashlights etc. I hav

- QF10010

Work as advertised. I use as "rod holders" on my boat.

- QF10010

Love these you can use them on a number of things are using for flounder gigging . Strapping the lights and hanging tools. Great for holding the Giggle Poles.

- QF10010

Fits perfect to hold my shovel on my roof basket good product

- QF10010

They work great! I use them on a snowmobile to carry a shovel and they couldn’t work any better

- QF10010

The application of the Quick Fist Original Clamps did not work as I originally planned. I will need to add spacers between the clamps and rack to allow more room for the shovel to fit securely. I think once I fashion the spacers to extend the clamps they will work just fine.

- QF10010

Worked great for my kayak wheeler Well made

- QF10010

Lasted about 6 months before breaking.

- QF10010

I bought these to replace broken brackets on an old set of workout weights. They are working great but I probably should have tried to find some with a little smaller diameter. These want to slip a little because the pipe they I use them on is right at 1" size.

- QF10010

Nice product! I mounted 2sets of these inside my truck bed to hold a couple of axes. Works great. The axes have stayed secure and clamps stay tight. Highly recommend.

- QF10010

The perfect item to organize my gear in the inside MOLLE racks of my truck bed. Once attached to the rack, they won’t go anywhere; no more flying shovels, axes and jacks.

- QF10010

These little things work great! I use them to keep shovels and jacks secured in the bed of the pickup.

- QF10010

These things work great. I keep a shovel on here for quick jobs on the trail. After a year of pulling the shovel on and off, these things are still holding up. Highly reccomended.

- QF10010

Purchased this item and received it within 3 days. Works exactly as advertised. Installed easily in bed of truck and holds a shovel for recover. Product made of sturdy rubber. Liked enough to purchase a second set to hold an ax.

- QF10010

Worked very well for the purpose we nee ded

- QF10010

Love the quick clamps. I bought a set of stainless steel bolts, washers, and nuts and drilled a hole through the rollbar and fixed the clamp directly to the bar. Easy as can be. One additional note though, if you're mounting something that is 1" diameter, this clamp will hold it, but not as tightly as I would have liked. To solve this, I just added a couple wraps of electrical tape to the place the clamp will secure (in my case, it was a shovel). Served two functions, one makes sure I put the shovel back in the clamps at the same height every time, and second made the shovel handle a nice tight fit in the clamp.

Clamps are still working great. Weather hasnt fazed them and they still hold tight. Shovel doesnt move at all going down the highway or while rock crawling. My stainless steel mounting hardware solution is still working great as well.
Dave J - 01/09/2018

Show More Reviews

Ask the Experts about this Quick Fist Tie Down Straps

Do you have a question about this Tie Down Strap?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality tie down straps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tie down strap information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Jameson C
Expert Research:
Jameson C
Employee Laura H
Written by:
Laura H
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Chelsea B
Updated by:
Chelsea B
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.