Quick Fist Mini Clamps - 5/8" to 1-3/8" Inner Diameter - Rubber - 25 lbs Each - Qty 2

Quick Fist Mini Clamps - 5/8" to 1-3/8" Inner Diameter - Rubber - 25 lbs Each - Qty 2

Item # QF30050

lowest price pledge

Retail:$27.30

Our Price: $6.43

You Save: 76%
Tie Down Straps

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.19 lbs

Quantity: 
In Stock, Ships Today
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos

Durable rubber, jaw-style clamps with adjustable straps help you store and transport fishing rods, small flashlights, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair. Lowest Prices for the best tie down straps from Quick Fist. Quick Fist Mini Clamps - 5/8" to 1-3/8" Inner Diameter - Rubber - 25 lbs Each - Qty 2 part number QF30050 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (41)
  • Q & A (6)
  • Videos (2)
  • Photos
  • Why etrailer?

Quick Fist Tie Down Straps - QF30050

  • General Cargo
  • Tie Down Clamp
  • Trailer
  • Quick Fist
  • 0 - 175 lbs

Durable rubber, jaw-style clamps with adjustable straps help you store and transport fishing rods, small flashlights, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair.


Features:

  • Works great on emergency vehicles, work trucks, off-road vehicles, military vehicles, ATVs, and boats
  • Quick and easy installation
    • Mounts with one #10 screw, bolt and washer, or 4 sheet metal screws and washers (sold separately) through the holes on the four corners of the pad
  • Heavy-duty transportation-grade rubber
    • Unaffected by climate
    • UV-resistant
  • Made in the USA


Specs:

  • Holds objects from 5/8" to 1-3/8" (15.748 to 33.02 mm) in diameter
  • Each clamp supports a safe working load of 25 lbs (11 k)
  • Mounting area: 1-1/2" x 1-1/2" (38 mm x 38 mm)
  • Quantity: 2 clamps
  • 1-Year limited warranty


Note: Quick Fist clamps are not to be used on exhaust pipes or any pipe that consistently exceeds a temperature of 180 F (82 C).


A new Quick Fist clamp fresh out of the mold can be stiff. Use two hands to open the jaws vertically and then pull each jaw once or twice. Close the jaws and open and close the strap a couple of times. It's now ready for mounting.


For applications where the Quick Fist clamp will be used at or near its maximum opening dimension, the clamp will not work in your hand, as it must be bolted to a fixed surface for the rubber to stretch properly.


Mount your small tools like fishing rods and AA-battery flashlights with the mini Quick Fist clamp

Mount your small tools like fishing rods and AA-cell flashlights with the mini Quick Fist clamp.


Installation


1. Use either a #10 screw or bolt and washer to fasten. (Alternatively, you may use 4 sheet metal screws and washers through the holes on the four corners of the pad.) Do not over-tighten.


2. Mount with the strap facing in any direction.


3. To clamp: put the tool or implement into the jaws. With both of your thumbs on the strap, push strap to reach the desired tightness. Repeat as necessary.


4. For smaller diameter objects, push jaw without strap inside the other jaw and tighten strap on top of jaw.




30050 Mini Quick Fist Clamp - Qty Two



QF30050 Installation InstructionsInstallation Details QF30050 Installation instructions



Video of Quick Fist Mini Clamps - 5/8" to 1-3/8" Inner Diameter - Rubber - 25 lbs Each - Qty 2


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Quick Fist Mini Clamp Review

Today, we're going to be taking a look at the Quick Fist Mini Clamp. It's sold as a two-part and it's part number is QF30050. The mini clamps are designed to mount small, cylindrical items with any surface you might need to made them to. Used for trailers, boats, RVs, campers, trucks, cars. Wherever you have a need to clamp something into place where it's not going to wiggle around or fall out, these will be great. Each clamp will hold up to 25 pounds.

It's a very easy installation process. You've got the one center hole, it's the minimum recommended. Use of a number 10 wood or sheet metal screw. We also have a couple of other holes located here if you'd like to use them. The heavy duty transportation grade rubber that they use for the clamps is a very sturdy, very long-lasting product.

It's unaffected by climate. It also resists salt and also UV light. Each clamp is designed to hold an object anywhere from 5/8 of an inch all the way up to an inch and 3/8. We're now going to install our mini clamp. Basically, we've got just the one screw that's required and remember, it's a number 10 wood or metal screw.

Over here. Now, our clamps, we can install these in any position. If you're wanting to hold something horizontally as you can see here, we've mount that way. For something vertical, we would then mount it this way to allow it to hang down from our item. We'll go ahead and do one each way and show you how it works. As you can see, with our vertical mount here, basically place whatever item is that you want to hold inside and we'll pull our tab over and push it down as far as we can to get it to lock into place.

This is our horizontal mount. Basically, just put it in there. Push our tab back till it locks into place and as you can see, not going anywhere. Nice and secure mount. Another application, maybe something long that you'd need two clamps for. Basically, you have this one turn in your same mounting position as this one here. Place one end in there and put the other one in here. As you can see, it keeps everything up off the ground. Really organized. The Quick Fist Mini Clamp is made in the United States and it offers a one-year warranty. With that, that will complete our look at the Quick Fist Mini Clamp, part number QF30050. .


Customer Reviews

Quick Fist Mini Clamps - 5/8" to 1-3/8" Inner Diameter - Rubber - 25 lbs Each - Qty 2 - QF30050

Average Customer Rating:  4.9 out of 5 stars   (41 Customer Reviews)

Durable rubber, jaw-style clamps with adjustable straps help you store and transport fishing rods, small flashlights, and more. They mount horizontally or vertically to your vehicle, trailer, garage wall, or any flat surface. 50 lbs WLL per pair.

- QF30050
by:

The straps after a year are still holding up strong. Being exposed to Maine winters in below 20 degrees haven’t fazed them at all. I even drilled too far when installing these to my toolbox and started to tear one of the straps and the tear hasn’t gotten any worse than that. I completely recommend these straps. 724581



- QF30050
by:

This is my second pair of these I love them can’t get any better I use one pair to hold a shovel on my roof rack and another pair for my fishing rod 654572



- QF30050
by:

Was exactly what I was looking for and shipment was FAST! Very please with my order from etrailer.com 649468



- QF30050
by:

They are great and they hold up there well it did exactly what I was anticipating them doing 615720



- QF30050
by:

I purchased the Quick Fist clamps to hold a shovel on my snowmobile for riding in the Backcountry. I saw them on etrailer and the price was half as much as anyone else so I ordered 2 sets. I called to confirm some information with Bill and he was excellent. I received my clamps in 5 days including the weekend. The clamps are made well from a solid rubber and the clamp strap over the top is flexible enough to be hooked on the 2nd or 3rd notch down. I mounted them to a 1/4" plate using #10 machine screws with a washer under the head to eliminate the problem of pulling through the rubber and I put lock nuts on the back. These clamps are perfect for my application. I have dealt with etrailer several times and they are excellent folks to deal with and have great products at awesome prices. I will surely give them a call for my next project. 601348



- QF30050
by:

Work great, was just thinking about ordering a couple more for another trailer 592681



- QF30050
by:

Solved all of our problems with shovels that needed to be mounted to the back of our tractors with easy access. None have broken or have dislodged due to weather. Perfect solution and perfect product. 573478



- QF30050
by:

Works well thanks 572807



- QF30050
by:

great product, well made 548278


Comments

Great product I use them on my 30 gal fish tank to fasten the intake & discharge tubes to the back of the tank. Used epoxy to fasten them and they work great

Richard - 07/31/2019

58456

- QF30050
by:

Great product exactly what I was needing to hold my tools in place. I would highly recommend them too friends and family .service was great, shipping fast.will shop here again 522979



- QF30050
by:

Just what I wanted. 521673



- QF30050
by:

We used these mini-clamps to hold a pole about 1-¼ inch in diameter that hold a 5-way weather station on the travel trailer so we have a bead on the weather when we are camping. They were easy to install and two of them hold the pole securely. The clamps were mounted on a vertical back side of the trailer so the the pole can be located at least 6 feet off the ground for best results from the weather station. If you level the trailer, the weather station is pretty level as well and these straps hold the pole in the wind and rain and we are very happy with how they perform. 521154



- QF30050
by:

Great product, fast shipping. 518894



- QF30050
by:

What a wonderful well made product everything works as advertised holds anything I put in it down to 5/8. Definitely will buy again. You definitely can't beat the price very very well-made product. 490746



- QF30050
by:

These were just what I was looking for --- using them on a t.v. antenna "hack" for my teardrop trailer. I have an expandable painter's pole. Took a12" x12" piece of wood, screwed these clamps on and used bolts/wing nuts on the other side to mount one of those flat antennas. The clamps hold the pole securely but also it's easy to take the pole off. etrailer as always, provided fast shipping. 490093



- QF30050
by:

They work very well the only room for improvement would be a hard mount instead of full rubber 489712



- QF30050
by:

In preparation for an over-landing trip, I hurriedly ordered two of the quick fist for tool attachment. Unfortunately they were too small to attach a full sized shovel to my roof rack(my original intent). I wound up tying down the shovel with a rope. The quick fist were just large enough to hold a small flashlight within the jeep which is what I re-purposed it for. The delivery of the product was prompt and the apparent quality is good, price point also refreshingly good, and I don't have a flashlight rolling around in the cab anymore. My fault for being in a rush. Suggest adding common tool examples rather than just diameter measurements when describing what it will hold. Thanks. 487845



- QF30050
by:

Great for holding fishing rods. 485678



- QF30050
by:

Just as pictured. Worked well for what I needed them for. Shipped quicker than I expected. 485035



- QF30050
by:

Arrived quickly. Just as advertised. Very pleased! 484558



- QF30050
by:

I am very happy with the results of my purchase from etrailer, great service, great products. I will be a long time customer, these folks have everything! 479684



- QF30050
by:

I haven't had the opportunity to put this product to work yet but have no doubts it will do exactly what it's designed for. These grips are made for small diameter items and I may order some larger ones also. I have some hand trucks I want to secure in transit. These grips were sent promptly. Thank you etrailer! 475342


Comments

I installed these in a commercial delivery truck. They worked fine until removed for service work done on the truck overhead door. They were in the way and we never properly reinstalled them. They should have a long service life if installed correctly. I would recommend using a flathead screw or bolt to prevent pull-through.

Dennis - 02/13/2019

49442

- QF30050
by:

I had this before so I know this is the best product i was looking for thank you 470269



- QF30050
by:

Bought these to hold a small shovel and faller's axe in the Jeep. Used a pair of 2.5" U bolts and attached these to the U bot bar. Works great, holds great even off road 464791



- QF30050
by:

As described, great price, fast deliver y! 464649



- QF30050
by:

Just what I was looking for! 462480



- QF30050
by:

clamp works very well , using it as a hold down clamp for a halligan tool on a fire truck . 442647



- QF30050
by:

Purchased these and the larger ones for our volunteer fire department fire and Rescue vehicles to store and organize small handled equipment, working out great, organization is better, and frees up space in the compartments. We'll definitely be buying more in the future for our other vehicles!! 438913



- QF30050
by:

great hold downs for the money 433572



- QF30050
by:

These clamps work as advertised. For the money, they hold tight and seem sturdy 420808


Comments

Still holding strong

John S - 08/16/2018

42408

- QF30050
by:

This is a good product it's just what I was looking for I'm useing it on my boat to secure a push pole and it works great 413193



- QF30050
by:

Use these to get landing net off the floor of my 24 ft Proline.Does a great job.Easy release when net needed for fish. 408984



- QF30050
by:

Installed these are a fire slide in for wildland fire work. Works perfect for broom size and slightly larger handles. Fastens down very well. 407757



- QF30050
by:

Excellent price for a great product, outstanding delivery time for the size of order I placed. 360878



- QF30050
by:

So far they have held the tools in place nicely. However, I still am not able to stretch them to the full size as listed on the purchase specs. Had to use one size larger then suggested on web review. 358132



- QF30050
by:

Nice little keepers, but they turned out to be a bit small for accomodate the big flashlight I needed to mount. 349476



- QF30050
by:

Package arrived in good shape. No shipping damage. Items were neatly packed in a cardboard box using heavy brown stuffing paper. Quick service. All parts I needed were in stock and shipped out on the same day they were ordered. I'm very pleased of the way Etrailer handled my order. 317707



- QF30050
by:

As always, ordering from etrailer.com is easy and the shipping is quick. I really appreciate their automatic recommendations of products similar to ones I pick, but less expensive, or even better than what I was ordering. These Quick Fist clamp hold a shovel and pick tight to the rack on top of my LandCruiser. And removing the tools is easy. 312392



- QF30050
by:

These things are sweet! Can be used for many different items. Here I'm using it to secure a GPS rod to a Polaris Ranger 500 (2012) for surveying. 260691



- QF30050
by:

Good value!! Just what I was looking fo r!! 235789



- QF30050
by:

Used the mini clamps to make removable rod holders for my truck. Works great! 182309


42
42

Ask the Experts about this Quick Fist Tie Down Straps

Do you have a question about this Tie Down Strap?



Do you have a question about this Tie Down Strap?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality tie down straps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate tie down strap information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jameson C
Written by:
Laura H
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Randy B
Video Edited:
Chad S
Updated by:
Chelsea B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.