Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Alan, you can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
view full answer...You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
view full answer...Most if not all trailer wiring harnesses/connectors use larger wires for the 12 volt and ground circuits compared to the other circuits (lights). The sockets themselves don't have an amperage rating so you will go by the draw of the things…
view full answer...It looks like the closest we have to those measurements is the Replacement Support Arm Assembly for Solera Pitched RV Awnings LC260294 which measures 66 1/8" long. Just to be clear, you will need to measure the wall mount from the top to the…
view full answer...Yes, the 2-Wire RV Propane Gas and Carbon Monoxide Detector, #RS54FR has two different mounting brackets to select from allowing coverage of the existing hole from previous installs. Please note the attached product review video.
view full answer...You could use the 2-wire Propane Gas and Carbon Monoxide Detector part #RS34FR in place of the Atwood 36681 that you referenced. This would fit in the cut out you have now and has a flange that is large enough that would cover the hole.
view full answer...LaSalle Bristol makes a waste valve similar to the #34466N4AB36GM which has a 120 inch long cable as part number #34466N4AB120GM. 120 inches is 10 feet which is as close as we can get to the size you are looking for. The measurement is from the base…
view full answer...We do have a nice selection of Dexter axles currently available, however we do not currently carry the specific off-road axles that are used on the Thor TAB Outback models that you referenced in your question. Another option to consider is an…
view full answer...I spoke with my contact at Lippert regarding your older Kwikee step assembly with the 909506000 control module. He stated that in order to replace the control unit all you need is the part #LC379606. This is designed for pre-IMGL step units like…
view full answer...To choose the correct trailer axle for your application you will first need to measure the Hub-Face (A in picture) and Spring-Center (B in picture) measurements on your current axle(s). Since 800 kg converts to about 1,764 lbs I recommend looking at…
view full answer...While we do not carry that exact lock assembly, we do have plenty of other suitable options that may work for you. If you're open to another option that is similar, the: -Bauer Products Camper Door Locks #BA54FR is also a great choice. This…
view full answer...What I think you may have installed currently is the Global Link RV Entry Door Locking Latch, #295-000019. This sets in a cutout that is from 2-1/2" to 3" wide and 3-1/2" to 4" tall. Please verify the cutout dimensions of your…
view full answer...Filter Your Search
Contact and Help