How to Remove the Outer Cover of the Ventline Exterior Wall Vent

Question

Question:

How do I remove the outside cover of the wall vent. I think it has disconnected from the flapper so I can close the flapper. It is on my 2021 Winnebago micro minnie trailer. Thank you

asked by: Ron M

0

Expert Reply:

Hey Ron!

There is a tab on the bottom of the Ventline Exterior Wall Vent # VE35VV that you'll use to disconnect the outer cover (see attached photo). I'm also linking a video where Steve goes over this tab towards the end of the video for you to check out.

Let me know what you find once you've disconnected it! Hopefully you're able to get in there and easily fix what's going on.

expert reply by: Jon G

0

Tab on Bottom of Ventline Exterior Wall Vent
(click to enlarge)

Ron M.

9/24/2025

Thank you

Reply

Jon G.

9/24/2025

@RonM Happy to help out!

Reply

Answer 1

The Ventline Pinnacle Ducted RV Range Hood with Light part #VE38SR has a 75 CFM rating.

view full answer...

Answer 2

Converter output is typically talked about in amperage and not wattage. Your 6325 would indicate that you have a 6300 model panel with a 25 amp converter. You can replace just the converter if you don't want to replace the whole panel or you can…

view full answer...

Answer 3

If you have the Magnetek Power converter, Series 6300 Model 6325, there is not a direct replacement available, most choose to upgrade the entire system at this point. I suggest the Progressive Dynamics RV Power Control Center with AC/DC Panel and…

view full answer...

Answer 4

Hey Scott, since your 2018 Toyota Tundra Crewmax has a bed length of 5-1/2 feet the automatic slider fifth wheel hitch kit you would need would be the Demco Hijacker part #DM28XV which comes with the correct rail kit for your truck as well. This…

view full answer...

Answer 5

Hey Joshua! The mounting holes across the top are spaced 3-3/4" so from left to right it is 11-1/4". This is pretty close but, from top to bottom it is 4-13/16" so that doesn't quite line up. You could potentially replace the…

view full answer...

Answer 6

We don't have a template we can offer but if you measure a 14 inch by 14 inch square you'll know where the #MA00-06200K would install. You could pretty easily draw out a 14 inch by 14 inch square on some cardboard and you'd basically have…

view full answer...

Answer 7

It Is not at all recommended to use two adapters with eachother, so your best option would be to use the Roadmaster Dual Hitch Receiver Adapter #RM-077-6 which features a 6" rise or drop which should give you plenty more clearance, we do also…

view full answer...

How to Remove the Outer Cover of the Ventline Exterior Wall Vent

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching