Shield and organize larger wire bundles with this 1/2" diameter Spectro loom. The 10' split tubing protects cables from abrasion and wear while keeping your wiring neat, accessible, and secure.Features: 10' length of 1/2" diameter split loom for organizing and shielding wire bundles Great for automotive, trailer, marine, or home electrical systems Protects wiring from heat, abrasion, and vibration Split design allows for easy installation around existing cables
Keep your wiring neat and protected with this 1/4" diameter Spectro wire loom. The 10' split tubing shields cables from abrasion and wear while keeping your setup organized and easy to access.Features: 10' Length of 1/4" diameter split loom for bundling and protecting wires Great for automotive, trailer, or home electrical use Helps prevent damage from abrasion, heat, and vibration Split design makes installation over existing wires easy
Secure your cable or wire to the frame of your trailer with this wire loom clamp. 1/2" Diameter metal clamp has PVC sleeve to protect the cable or wire from damage.Features: Wire loom clamp secures cable or wire to the frame of your trailer PVC sleeve protects cable or wire from damage Metal construction Specs: Clamp opening inner diameter: 1/2" Quantity: 100 clamps
Hey Joseph, since your 2022 GMC Van doesn't have the 7-way wiring that would indicate it doesn't have the factory tow package so you'd need to go a different route to install a 7-way. You'd need to first start with the 4-way kit part…
I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver…
Yes, we have the Trailer Hub Assembly for 2,000 lbs Axles with 4 on 4 inch bolt pattern, and 1 inch inside diameter bearings, item #AKIHUB-440-2-1K. You should check the existing bearing part numbers on your trailer to be sure that they are the…
Based on your photo it looks like you have 2,700 lb axles, and we do have hubs for that size axle. However, you will need to confirm the bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings…
Hello Caleb, thanks for reaching out. So I was not able to fine any specific info on the LED Clearance/Side Marker/Third Brake Light #PET75PV but based on the amp draw listings of similar lights it’s reasonable to assume its draw is in the same…
Thanks for the pictures! Based on the weight of your 2008 Keystone Cougar 5th Wheel, you will want the item #LG-1 landing gear set. You are going to want to measure to be sure this is the right size for you. The two things you will want to measure…
We have an aluminum 7 spoke 14 inch trailer wheel that looks pretty close to the wheel in the picture you sent us, but it's not an exact match. For that wheel you would want the part #AM22329. For a 205/75R14 you can use #AM10234 or tire #AM10229…
The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center #41944 for your 2004 GMC Sierra is made in Mexico. However, Curt hitches like Curt Trailer Hitch Receiver #C15312 are all made in the USA.
Hi Jean, There's definitely some testing that you can do to narrow down what the issue is and get it fixed. We'll just need more info here on your setup to figure out what troubleshooting steps you should take. What type of brakes does the…
Hello Eric, thanks for reaching out. The TorkLift SuperHitch #TL27CR you mentioned will not fit the cab and chassis model of the F-450. It is only for the super duty pickup models. We do offer one TorkLift SuperHitch for the 2024 F-450 cab and…
Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…
Hi David! I have a couple options for you, but Thule does not make a light kit specifically for the T2 Pro XTR, unfortunately. If you are ok with not moving the license plate, the Curt Auxiliary LED Indicator Lights #C53201 is an easy an inexpensive…
Trailer Wire Metal Loom Clamp - 1/2" Heavy-duty wire loom clamp is made of plated steel with a rubber sleeve that protects the loom and cable, and holds it securely to a frame or panel surface.
Wire loom 1/4" Inner diameter Polyethelene construction Split loom Black color 1' Long Sold by the foot - for longer pieces, select quantity above 7509 Spectro Wire Conduit - 1/4 Inch Diameter - 1 Foot
Trailer Wire Metal Loom Clamp - 1/4" Heavy-duty wire loom clamp is made of plated steel with a rubber sleeve that protects the loom and cable, and holds it securely to a frame or panel surface.
Secure your cable or wire to the frame of your trailer with this wire loom clamp. 1/2" Diameter metal clamp has PVC sleeve to protect the cable or wire from damage.Features: Wire loom clamp secures cable or wire to the frame of your trailer PVC sleeve protects cable or wire from damage Metal construction Specs: Clamp opening inner diameter: 1/2" Quantity: 1 clamp
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom harness. Connector plugs directly into existing tow connector on your truck - limited cutting, splicing, and tapping required.No more jiggling wires or cleaning out corroded pins before every trip. Clean Installs That Stay Put: Zip-Ties and Slit Loom Included You won't need a trip to the hardware store just to finish the job. The included zip-ties and protective loom help you route the wiring cleanly along factory lines, keeping it out of sight and out of trouble from snags or heat.
This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.Features: Adapts 4-way flat to both 7-way RV and 4-way flat 4-Way flat output connects tail lights, brake lights, and turn signals 7-Way connects tail, brake, reverse, turn signals, and auxiliary power Dust covers keep connectors clean when not in use Split loom keeps wires contained and well protected Simple installation Wiring harness plugs into existing 4-way flat connector and hardwires to existing wiring to get additional functions needed for 7-way Included hardware and metal mounting bracket secures wiring to the vehicle or trailer hitch 1-Year limited warranty Specs: Distance between bracket mounting holes center to center: 2-1/4" Harness length: 17" Yellow wire is for reverse lights Blue wire is for brakes Black wire is for 12 volt power White wire is ground
Designed to use with your Curt Echo In-Line brake controller for easier installation. One end of this no-splice wiring harness plugs into your vehicle's OEM socket. The other end plugs into your 7-way connector (sold separately).Features: Wiring extension provides 20" of extra length for easier positioning and installation of your Curt Echo In-Line brake controller Connects OEM USCAR socket to 7-way connector (not included) or the Echo In-Line harness Simple plug-and-play design eliminates the need for cutting or splicing Slit loom keeps wires contained and protected 1-Year limited warranty
This multi-function, vehicle-end connector converts any 4-way flat, vehicle-end plug to a combination 7-way outlet and 4-pole flat outlet.Features: Adapts 4-way flat to both 7-way RV and 4-way flat 4-Way flat output connects tail lights, brake lights, and turn signals 7-Way connects tail, brake, reverse, turn signals, and auxiliary power Dust covers are dirt and weather-resistant Split loom keeps wires contained and protected from the elements Simple installation Wiring harness plugs into existing 4-way flat connector and hardwires to existing wiring to get additional functions needed for 7-way Included hardware and metal mounting bracket secures wiring to the vehicle or trailer hitch 1-Year warranty Specs: Distance between bracket mounting holes center to center: 2-1/4" Harness length: 10" Yellow wire is for reverse lights Blue wire is for brakes Black wire is for 12 volt power White wire is ground
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package port - no cutting, splicing or tapping required.Features: Provides a 7-way, blade-style trailer connector at the back of your vehicle to power your trailer's signal lights Designed for use with a factory tow package Connects quickly and easily - no cutting or splicing of wires Locate connection point along frame rail Plug in connector Includes required relays to activate functions Comes with protective cover for 7-way connector Specs: Overall length: 30" Wire loom length: 24" Limited 1-year warranty Installation This custom-fit T-connector plugs into your factory tow package wiring harness, which is located beneath the rear of your vehicle, along the driver's-side frame rail.
Zinc plated steel cable clamps are insulated with black vinyl. Designed for use where superior strength and toughness is required. Clamps have one round and one oval mounting hole.
If your vehicle already has a 4-way flat, this kit includes everything you need to install an electric trailer brake controller and 7-way connector. If there's not an existing 4-way flat on your vehicle, you can purchase one separately.Features: Kit includes wiring and accessories required for installation of a trailer brake controller (sold separately) in your vehicle Designed for use on a vehicle with an existing 4-way flat trailer connector 25' Long, 10-gauge duplex wire is wrapped in an abrasion-resistant cover Connect one wire to the blue wire on the brake controller Connect one wire to the positive post on the vehicle's battery via the included 40-amp circuit breaker Pre-wired 7- and 4-way trailer connector mounts easily at rear of vehicle with included bracket Plugs into existing 4-way trailer connector on vehicle Heavy-duty circuit breakers - (1) 20 amp, (1) 30 amp, and (1) 40 amp Circuit tester helps you find the stoplight switch wire above the brake pedal Also includes hardware for installation: Ring terminals for battery and breaker hookup Quick-splice wiring connectors Self-tapping screws Zip-ties Wire loom for a professionally installed appearance Note: No existing 4-pole connector: If your vehicle does not already have a 4-pole flat trailer connector installed, the etrailer application guide can be used to find the easy-to-install connector made specifically for your vehicle.
Wiring adapter lets you easily connect your Redarc Tow-Pro electric brake controller (sold separately) to your existing Curt brake controller wiring harness. No need to remove your existing wiring harness. Allows for easy, plug-and-play install.
Wiring adapter lets you easily connect your Redarc Tow-Pro electric brake controller (sold separately) to your existing Tekonsha brake controller wiring harness. No need to remove your existing wiring harness. Allows for easy, plug-and-play install.
Wiring adapter lets you easily connect your Tekonsha electric brake controller (sold separately) to your existing Curt brake controller wiring harness. No need to remove your existing wiring harness. Allows for easy, plug-and-play install.
Wiring adapter lets you easily connect your Redarc Tow-Pro electric brake controller (sold separately) to your existing Hopkins brake controller wiring harness. No need to remove your existing wiring harness. Allows for easy, plug-and-play install.
Filters
