TowSmart Wire Loom, 1/2" Diameter, 10' Long

Video Transcript for Review of TowSmart Wiring - Wire Loom 10 Foot 1/2 Inch Diameter - TS69QR

Hi everybody. Andy here with etrailer. Let's take a quick look at this TowSmart Wire Loom. Now this wire loom is basically a protective sleeve for your trailer or vehicle wiring. This is a 10-foot-long piece of split plastic tubing that's going to be right about half an inch in diameter. And this is made to keep your wires safe, neat, and organized.

And because it is split down the middle, you're not gonna have to worry about threading your wires through. You're just gonna open this up, wrap it around your wiring bundle, and then you're done. So, this is gonna be great for keeping things tidy and for protecting your wires from abrasion, dirt, water, heat, and road debris. You're typically gonna use something like this if you're installing or redoing trailer wiring for lights or brakes. This is gonna help prevent wear from vibration or rubbing against metal parts, which can lead to electrical problems later.

Plus, this is going to give your wiring a clean, professional look instead of a jumbled mess of exposed wiring. Now, if your wiring's already enclosed or it runs somewhere safe and protected, then you're probably not going to need this. But if your wires are exposed, and especially underneath a trailer or a vehicle, this loom is going to be a simple, cheap way to make sure that your wiring setup is going to last longer and ultimately look better as well. If you happen to have any other questions, whether it's about this bundle or anything else that we carry, don't hesitate to reach out. We wanna make sure that you're getting exactly what you need.

Well, again, my name's Andy. Thank you for joining me.