Your adjustable ball mount isn't cheap, and neither is the equipment behind it. This keyed-alike lock set keeps the receiver pin and stacked tubes secured so nobody can walk off with your setup while you're not looking.Six keys are included, making it easy to keep spares in your truck or garage. Specs Application: Gen-Y 32K Mega-Duty adjustable ball mounts Fits 2", 2-1/2", and 3" trailer hitch receivers Hitch Pin Locks Included: (2) 3/4" Diameter x 3-7/8" span (1) 5/8" Diameter x 3-5/8" span
After dealing with bulky hitches and lost bed space, you start looking for something simpler. GEN-Y's Nomad replaces your fifth-wheel pin box with a gooseneck setup that frees your truck bed and adds an auto-latching coupler for easier hookups.
This gooseneck hitch adapter installs quickly and easily into your truck's OEM puck system to provide additional cab clearance without any added bulk. Includes 2-5/16" ball with 5" offset from front to rear.
This shock-absorbing pin box works with your gooseneck hitch to give a smooth ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. Auto-latch allows for easy hookup. 4.5K pin weight.In order for the pin box's shock absorption to work correctly, make sure your pin weight is within the pin weight range. To calculate correct pin weight for Gen-Y hitches, use this formula: GVWR x 0.22 Because the Gen-Y Hitch Executive is shorter than the Lippert Turning Point pin box, the clearance between your trailer and tow vehicle during turns might be reduced.
Insert this heavy-duty mount into your 2" hitch to get 5 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 2,000 lbs.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Built-in receiver size: 2" x 2" Maximum drop: 7-1/2" Maximum rise: 2-1/2" Gross towing weight: 10,000 lbs Tongue weight: 1,500 lbs Overall height: 13-3/16" Total length with included ball mount installed: 15-9/16" Total length without ball mount installed: 11-5/16" Hitch pin hole diameter: 5/8" Accessory pin hole diameter: 5/8" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit.
Hey Jordan! Based on your measurement you have a Lippert 1116 or 1716. If you want to confirm that feel free to send me the S/N on your pin box. The Gen-Y Nomad you were looking at is for the Rhino Box so that is not a fit. What you need is the Gen-Y…
Hello Levan, thanks for reaching out. Yes, the Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY57ND is made to replace the Lippert 1621 pin box so the bolt hole spacing and dimensions are the same. Your cab and tailgate clearance will be…
Hey Sean, yes you can use the TowSmart Adjustable Ball Mount #TS89VR in the Gen-Y Voyager Ball Mount #GY52JJ. This will provide cushioning to the adjustable ball mount plus some additional drop. What are you planning on towing with this setup?
Hey George, welcome back! To get that high of a capacity out of an extension, you'll need the Gen-Y Hitch Receiver Hitch Extender item #GY89SR. This works with a 2" hitch receiver and extends the hitch pin hole out 14". It has a 10,000…
Hello Nathan, Great question. There are 2 key factors with finding the right Gen-Y Gooseneck, the pin box number, and the pin weight (tongue weight). I was able to look up the GVWR of your 2022 GD Reflection 367BHS which is 14,995 lbs. They have a…
Hey Jason, great question - the Keystone Cougar line almost always uses a Lippert 1621 pin box, which puts you in the territory for the Gen-Y Nomad #GY57ND. That model is built to bolt directly to the 1621/1116/1716 bolt patterns without any adapters…
Hey Jeff, this is a great question. We actually had an affiliate of ours test basically all of the shock absorbing ball mount options out and what he found was that the Shocker part #SHK46VR and the Curt Rebellion both worked really well. He did find…
Yes, the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers #325-GH-1125 is great for your needs, since your trailer and boat have a combined weight fully loaded of about 10k pounds. This product has a drop of 7-1/2" and rise of 7-1/2" which…
We do carry the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch #325-GH-1125 that you mentioned. This is designed to fit a 2-1/2 inch hitch like what you have and has up to a 7-1/2 inch drop. The ball sizes are 2 inch and 2-5/16…
Mark, I hear you - those heavy manual sliders are a chore. The important thing to know is that the Gen-Y Nomad doesn’t add any turning clearance. It matches the geometry of a standard fixed pin box, so whatever cab clearance you have today without…
Thanks so much for that info Tyler, and I was able to find the right Gen-Y gooseneck pin box for you. Since you have the Lippert Rhino on your 2024 Jayco Eagle 355MBQS, the right option is the following: - Gen-Y Hitch Shock Absorbing 5th Wheel to…
The diagram I have linked for you shows the recommended minimum clearance distances for trucks towing 5th wheel trailers. The diagram includes vertical clearance at the bed rails as well as lateral clearance at the tailgate and bumper. When adjusting…
Insert this heavy-duty mount into your 2-1/2" hitch to get 3 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 3 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 6" Maximum rise: 6" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 21,000 lbs Maximum tongue weight: 3,000 lbs Overall height: 9-1/2" Total length from center of pin hole with included ball mount installed: 13-1/4" Total length from center of pin hole without ball mount installed: 10-1/4" Distance from center of pin hole to first weld on shank: 4" Distance from center of pin hole to base of receivers: 5-5/8" Hitch pin hole diameter: 5/8" Distance between pin holes: 1" Accessory pin hole diameter: 5/8" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 3 stacked receivers that sits along the vertical shank of the unit.
Insert this heavy-duty mount into your 2-1/2" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 9" Maximum rise: 9" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 21,000 lbs Maximum tongue weight: 3,000 lbs Overall height: 12-1/2" Total length from center of pin hole with included ball mount installed: 13-1/4" Total length from center of pin hole without ball mount installed: 10-1/4" Distance from center of pin hole to first weld on shank: 4" Distance from center of pin hole to base of receivers: 5-5/8" Hitch pin hole diameter: 5/8" Distance between pin holes: 1" Accessory pin hole diameter: 5/8" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.
This gooseneck hitch adapter installs quickly and easily into your truck's OEM puck system to provide additional cab clearance without any added bulk. Includes 2-5/16" ball with 5" offset from front to rear.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit.
Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit.
This gooseneck hitch adapter installs quickly and easily into your truck's OEM puck system to provide additional cab clearance without any added bulk. Includes 2-5/16" ball with 5" offset from front to rear.
Insert this heavy-duty mount into your 2" hitch to get 3 stacked 2" receivers for mounting the included 2" ball, 2-5/16" ball, or other hitch-mounted accessory.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball or 2-5/16" ball provides connection point for trailer coupler 3 Stacked receivers accept included ball mount, as well as other hitch-mounted accessories 1 Pin included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Built-in receiver size: 2" x 2" Maximum drop: 5" Maximum rise: 5" 2" Ball capacity: Gross towing weight: 12,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 2,000 lbs Overall height: 8" Total length with included ball mount installed: 12-1/4" Total length without ball mount installed: 9-1/8" Hitch pin hole diameter: 5/8" Accessory pin hole diameter: 5/8" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 3 stacked receivers that sits along the vertical shank of the unit.
Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.
After dealing with bulky hitches and lost bed space, you start looking for something simpler. GEN-Y's Nomad replaces your fifth-wheel pin box with a gooseneck setup that frees your truck bed and adds an auto-latching coupler for easier hookups.
Ball mount includes 2 hitch balls to fit your application. Tow up to 16,000 lbs with the 2" ball or 21,000 lbs with the 2-5/16" ball. Hitch pin and clip or hitch lock sold separately.
Insert this heavy-duty mount into your 3" hitch to get 4 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitch receivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 9" Maximum rise: 9" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 12-3/4" Total length with included ball mount installed: 17-3/8" Total length without ball mount installed: 13" Hitch pin hole diameters: 5/8" and 3/4" Accessory pin hole diameter: 3/4" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit.
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit.
Insert this heavy-duty mount into your 2-1/2" hitch to get 5 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 2-1/2" x 2-1/2" trailer hitch receivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 9" Maximum rise: 9" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 15-3/4" Total length from center of 5/8" pin hole with included ball mount installed: 12" Total length from center of 5/8" pin hole without ball mount installed: 9" Distance from center of 5/8" pin hole to first weld on shank: 3" Distance from center of 5/8" pin hole to base of receivers: 4-5/8" Hitch pin hole diameters: 5/8" and 3/4" Distance between pin holes: 1" Accessory pin hole diameter: 3/4" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit.
Say goodbye to white-knuckle towing. This Phantom XT adjustable ball mount gives you a smoother, steadier ride, turning rough roads into calm stretches and giving you the kind of control that makes towing feel less like work and more like confidence.
Insert this heavy-duty mount into your 3" hitch to get 5 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory. Tongue weight is 3,500 lbs.Features: Adjustable ball mount lets you hook up your trailer to your tow vehicle Shank slides into hitch receiver on your vehicle 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler 5 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories 2 Pins included to secure accessories to shank Adjustable height lets you tow trailers of different heights with the same vehicle Drop ball mount lower or raise it higher to match your application Heavy-duty steel construction Zinc primer and powder coat finishes resist corrosion Hitch pin and clip or hitch lock for securing to hitch receiver sold separately SAE J684 certified Made in the USA Specs: Application: 3" x 3" trailer hitch receivers Built-in receiver size: 2-1/2" x 2-1/2" Maximum drop: 12" Maximum rise: 12" 2" Ball capacity: Gross towing weight: 16,000 lbs Maximum tongue weight: 1,500 lbs 2-5/16" Ball capacity: Gross towing weight: 32,000 lbs Maximum tongue weight: 3,500 lbs Overall height: 15-3/4" Total length from center of 5/8" pin hole with included ball mount installed: 12" Total length from center of 5/8" pin hole without ball mount installed: 9" Distance from center of 5/8" pin hole to first weld on shank: 3" Distance from center of 5/8" pin hole to base of receivers: 4-5/8" Hitch pin hole diameters: 5/8" and 3/4" Distance between pin holes: 1" Accessory pin hole diameter: 3/4" Multiple Stacked Receivers for Easy Adjustment This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit.
Insert this shock-absorbing, adjustable mount into your hitch to get 5 stacked 2-1/2" receivers. Flexing rubber cords limit shock. 2" Ball, 2-5/16" ball, and pintle hook included.
This shock-absorbing pin box works with your gooseneck hitch to give a smooth ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace. Auto-latch allows for easy hookup. 4.5K pin weight.Pivot points are built into the Gen-Y pin box adapter. This allows for movement between the box, which attaches to your trailer, and the coupler tube, which connects to the gooseneck hitch ball in your truck bed.
Filters
