Is this right for you? Product Expert Alexander C says:
Insert this heavy-duty mount into your 2-1/2" hitch to get 5 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory.
Features:
Specs:
This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 5 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.
Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.
With the 5 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys. Today we're going to be taking a look at and showing you how to install the line of GEN-Y adjustable two ball mounts for two and a half inch hitch receivers. So our GEN-Y ball mount here, this line in particular is going to be specifically designed for the larger three quarter and one ton trucks that have a two and a half inch by two and a half inch receiver tube. Now all these trucks are going to come with an adapter that will allow us to use our two inch ball mount with the two and a half inch receiver tube on our truck. However, as you'll come to notice shortly, this really creates a lot of rattle for adding an additional point of contact in there. It makes things very loose, and you're definitely going to be hearing it.With this solid two-inch shank, we're not going to have any of those issues with that excess rattling.
We're going to have a nice and tight fit inside the receiver tube here. We don't have to worry about any additional adapters. So we talked a little bit about the range of adjustment that the GEN-Y offers here for the two and a half inch ball mounts. The reason you're going to be interested in an adjustable ball mount is typically for people who have more than one trailer. So normally you'd measure your rise and drop from your truck and your trailer, and you need to pick a ball mount that meets that exact need, but that's only going to cover you for one trailer.
If you're towing multiple trailers, your rise and drop requirements are likely going to change for each trailer. Therefore, having adjustable ball mounts allows you to accommodate multiple trailers without having multiple ball mounts.So with our stacked receivers here, we're obviously going to get the adjustability we need for our trailer. But something else you can do is, you can actually tow with one of the lower two stacked receivers here, and you can put a bike rack in the top one here. So if we're really trying to load up, head out for the campsite, hit the trails, we're going to be able to attach a bike rack in here, into our trailer at the same time. There's also options that have a little bit of an offset, meaning the stacked receiver tube.
There's going to be one above the actual hitch on the vehicle. That'll be somewhere in this area and that'll give you a little bit more clearance here so we can still tow level and get our bike rack in place. So something I personally really like about the GEN-Y adjustable ball mounts is their finish.Now there's not really many other adjustable ball mounts on the market that have this nice of a finish. It's going to be super durable. You can really bang it up, throw this thing in and out of your truck bed without having to worry about nicking that coating.
It has a nice two-tone hammered finish with some black and silver speckles. It looks really nice and it's going to hold up for time to come. So if you have a super, super heavy trailer, you're really maxing out the towing capacity of your vehicle. And you're worried about the weight capacity of your ball mount, you shouldn't be for any of the GEN-Y line. They're extremely overbuilt made of heavy duty steel. This particular model here has a 21,000 pound weight capacity. However, there are options for weight capacity up to 32,000 pounds. So something else I'm sure you guys can appreciate is that GEN-Y products, the adjustable ball mounts, are made right here in the USA. So you know that you're getting a quality, well-made product.So let's talk about hitch pins now. With our kit here, we're going to get two hitch pins. And this may or may not be enough for you to use straight out of the box. If you have a trailer with a lunette ring, and we're going to need to use this pintle lock here, you'll actually need an extra hitch pin because we'll need one for the ball, one for the pintle lock and one for the trailer hitch receiver. If we're just going to be towing a regular trailer here, then we'll have enough hitch pins to cover us. We'll have one for the ball and then one for the hitch here. However, I'm definitely going to recommend with such a nice inexpensive ball mount to obtain locking hitch pins. You can just simply get one that'll secure the ball mount inside the trailer hitch, or you can get a matching set here that'll match all of your locks for the trailer hitch, the ball mount and even the pintle lock.So with our kit here, we're going to get a number of different things. The first thing we're going to talk about here is we have our stacked receivers. The next thing we're going to have is our two ball mount, which comes with both a two inch and a two and five 16th inch hitch ball. We're going to have next is our pintle lock. Then finally, we're going to have two hitch pin and clips. So to get everything into position, we're going to first start by taking our stacked receiver here. We're going to lift this up and then we're going to insert it into the trailer hitch on our truck here. Keep in mind we have two hitch pin holes here, depending on how much clearance we need. That first hitch pin hole here is going to line up perfectly. The other one we'll be able to use as well. Now, ideally we want as much of the shank inside the receiver tube as possible. So if we can get to that second hitch pin hole, that's the one we should use. Now we'll take our hitch pin here. We'll insert it into place. And then we'll follow this up with one of our clips.Now we'll take our two hitch ball assembly here, and we'll insert this into one of the stacked receivers here on our ball mount. The one that we are going to insert it to is going to depend on which trailer we're towing. We'll need to measure beforehand to make sure that we get the correct spot. In order to take these measurements, we're going to come to the truck side. We'll measure from the ground to the top inside edge of the trailer hitch opening, and then we'll compare that measurement to our trailer while it's leveled. We'll measure from the ground to the bottom of the edge on our coupler. Now, if the truck is going to be higher than the coupler, the difference between the two means we're going to need a drop. If the truck is lower than the coupler on the trailer, that means we're going to need a rise.So this particular model that we have here with the four stacked receivers, this is going to offer a nine inch drop. There's also other options as well that'll cut the drop down to six inches or extended all the way to 15 inches. Now we want something that's going to be a good range here no matter what trailer we're towing. We don't want to get a super long drop if our truck doesn't sit that high, because then we could run into ground clearance issues. This is probably good for this truck. This is a nine inch drop. So this will give us a wide range of trailers. Really, no matter how high or how low they sit, we should be able to tow them level, no matter the height here with this nine inch drop. But again, I definitely recommend you verifying your measurements beforehand so you can make sure you choose the appropriate rise/drop for your ball mount.So now we can go ahead and insert our hitch ball assembly, making sure that we're choosing the appropriate hitch ball size. We have two inches here, two and five sixteenths inches here. So we'll make sure we have the correct one. And then we can insert it into one of the four stacked receivers. Now, granted, the number of stacked receivers you have is going to vary depending on which particular model you have, but you want to go ahead and take those measurements first so you know which one to stick it in. We'll just use this one for example. So we'll push it all the way through. And so we line up our hitch pin holes. Once we've done that, we'll stick our hitch pin through, follow that up with our clip. So if our trailer had a lunette ring on it, we'd want to install our pintle lock as well. And this is pretty easy. We'd simply slide it into the receiver tube above our hitch ball assembly here, and then secure it with one of our locking pins. For this particular trailer we're going to be hooking up to, it doesn't have a lunette ring. We just have a standard coupler so we won't be using this.So now that we have everything set up, we're ready to go ahead and hitch up to our trailer. Now we're ready to hit the road. So in summary, the GEN-Y adjustable ball mount line, they're excellent options for anybody looking to tow heavy trailers. They're going to be particularly useful for those guys who really want to load as much stuff as possible. They want to tow their trailer, but they also want to have their bike rack attached for the family. Or if you're towing agricultural trailers and you have trailers with the lunette rings on there this is, again, going to be an excellent option because it comes with the included pintle lock. And that's going to do it today, guys, for our look at the GEN-Y adjustable two ball mounts for two and a half inch hitches..
Average Customer Rating: 4.7 out of 5 stars (35 Customer Reviews)
Insert this heavy-duty mount into your 2-1/2" hitch to get 5 stacked 2-1/2" receivers for mounting the included 2" ball, 2-5/16" ball, pintle hook, or other hitch-mounted accessory.
The hitch is great except for one problem. The ramp in front of the 2 5/16 ball that is for a pintle hitch is cracking at the weld.
This hitch is solid. It u is very heavy. I will never need something different. I have towed thousands of miles with three different trailers. I like the flexibility. Works very well for me.
Looks fantastic. I had to return and get a 6" drop because this 9" drop hangs too low for my 2019 silverado 3500 SRW.
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Haven't used it yet but it looks great! 19 f250 with 8" lift and 37's. The 12 drop is perfect
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
This hitch has been used with both balls in every height position. Hitch is durable and high quality. It has not been off my truck since I purchased it and is used frequently to tow 10-20K trailers.
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Everyone was helpful to order and help towards getting an account set up for the business.
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Been towing with this hitch for a year now. It’s the best hitch I’ve ever owned. The longest I’ve ever kept the same hitch. Easy to switch heights, strength, it’s bulletproof. I’ve dropped a loaded dump trailer onto the ball after not getting it lined up correctly. The weight would have bent any other hitch. This Gen-Y laughed at it.
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
This is great. Heavy duty, quality product. will use to tow my toad behind my RV & bike rack for bikes above tow bar
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
This review is for the install only, as i have not towed with the hitch yet... Well, getting the hitch into the receiver was a major pain in the rear. So much powder coating made it very difficult to insert. I hade to use a 5000lbs tie down ratchet, and it took about 45 minutes to complete the task. Not happy with that portion at all.
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Sturdy, well built. But it rusts!! All that money and it rusted within months. I’ve had a B&W for 10+ years and it’s as shiny as the first day.
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
I think all trailer hitches should be as strong as this one.
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
It was as advertised. Box was a bit beat up and the delivery fellow was not happy carrying it. We will be using it shortly.
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Shipping was lightning quick, fantastic hitch insert...
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
well built and easy to change heights for different trailers. eliminated a lot of play from reducing down to use 2" hitches in the 3" receiver
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
A little heavy when installing
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
I have been pulling this trailer daily for 19 years. Have been through a few hitches in that time. They all seem to bend over time. This one has just been installed and I must say it is the best quality heavy duty hitch I have ever purchased. Can't wait to pull with it...
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
the product looks great. Everything was as described and it looks very durable. The color looks better in person than in the photos.
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Quick Delivery and great communications all along the way. I have purchased from them before and they always have been awesome to work with.
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Nice quality & design - good fit - heavy duty - prompt delivery - easy return policy (wrong one - my fault) Knowledgeable sales personnel that make the transaction easy
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Good customer service - prompt shipping and easy ordering. Hitch appears very durable and fits in ford 250 3” receiver.
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
Great customer service
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
The hitch came quickly, it's top quality and super heavy duty. Thanks!
Review from a similar Mega Drop Ball Mount in Trailer Hitch Ball Mount
I am extremely happy with the hitch and lock. Both components are solid as I expected
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.