Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle.Features: Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle Includes: 1 Outer bearing (L44649) 1 Inner bearing (L68149) 1 Inner cup (L68111) 1 Outer cup
Trailer Hub Grease Seals Two 10-36 Seals per Package Double Lip Seal For single lip seal see # 42385 I.D. O.D. Use With: 2.250 3.376 E-Z Lube End Units Seal Cross-Reference Dexter # Transcom #
Moves your trailer's leaf springs to the top of your axle with this kit. For 2-3/8" diameter axles and works with double-eye leaf springs only.Features: Fits 2-3/8" axle Allows moving trailer leaf springs to top of axle For use with double-eye springs only Sleeve bolts allow the setup to install level Includes: (2) Spring Seat (8) Nut
Suspension kit includes equalizers and hardware for attaching 4 leaf springs to the hangers on your trailer's frame. Works with 33" axle spacing. Built-in grease zerks for easy lubrication ... impacts from one axle to another by permitting movement between the axles Springs attach to ends of equalizers with included hardware Wet bolts secure equalizers and springs to the hangers on your trailer
(2) Double-lipped grease seals I.D. O.D. Use With: 2.125 3.376 E-Z Lube and Oil 5,200, 6,000 and 7,000 LB Axles Seal Cross-Reference Dexter # Transcom # National # NOK # Chicago Rawhide # 010-010-00
I recommend an axle-less system for your trailer. The axle-less systems can be mounted to the trailer frame. This means you do not need the springs and hangers and you aren't restricted by the width of the trailer frame. If you need electric…
Due to shipping size and weight restrictions we cannot ship axles over 89-inches overall length. You'll need to source your beam axle from a local trailer supply shop who can order one for you with the required length, spring seat dimensions and…
The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.
First, I would say if there is any question on the road worthiness of the trailer, take the steps to correct it. Better safe than sorry. Some trailers have wheels that are hub-centric, the wheel is centered on the hub using the center pilot holes.…
I am pretty sure that the axle you are in need of is a 7k axle that has 95 inches from hub face to hub face and 80 inches from spring seat center to spring seat center which we do have a replacement for with the part #8327834. I would recommend you…
For that I recommend an electric jack set like the Ultra-Fab Deluxe Electric Landing Gear Set #UF17-943010 which has a combined 12,000 lbs of capacity, and offers 38" of lift.
Yes, the Dexter Trailer Hub and Drum Assembly #8-219-4UC3-EZ that you referenced is a confirmed fit for your Lippert 6k axle that you mentioned but you'll need to verify the grease seal dimension on your spindle. You'll need yours to measure…
I do have a way for you to use the Dexter Trailer Axle Beam #8327834 so that the springs are on top of the axle, but we actually don't manufacture any of these axles so we wouldn't be able to make a custom axle for you. We do however carry…
I may have an option for you, but there is not a 7000lb axle that can be used with hubs that use the 5 on 4-1/2 bolt pattern. We offer the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs #8327834 which is 95" long…
Hey William, I 100% would choose the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 over installing the Lippert Center Point by Trailair Air-Ride Suspension Upgrade #LC1565391. We've run into numerous fitment…
Yes, there is an upgrade for the Dexter Curved Equalizer part #K13-142-02 that you have on your trailer now and that is the Equa-Flex Cushioned Equalizers part #LC314336 which have a rubber core that minimizes back-and-forth movement in addition to…
The Dexter E-Z Flex Suspension Kit part #K71-653-00 will work just fine on 3,500 axles assuming the measurements match up which in your case they do. I have spoken to Dexter about this before and the weight capacity listed is more or less a guide to…
Replacement grease seals. Double-lip design helps keep water out and grease in. diameter: 2.565" Quantity: (2) 10-19 grease seals Inner Diameter Outer Diameter Applications 1.719" 2.565" 3,500-lb Axles Seal Cross Reference Dexter Transcom National NOK Chicago Rawhide
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. Compatible with electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease ... , races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 3,500-lb trailer axles with #84 spindles Drum dimensions: 10" diameter x
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels. bolts and hardware (BRKH12) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and
Trailer axle measures 86-1/2" from hub face to hub face, 71-1/2" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 10" x 2-1/4" Assemblies have rust-resistant, e-coated backing plates to protect from road debris. Fits 13" to 15" wheels. bolts and hardware (BRKH10B) sold separately QAI , CSA , and SAE-N certifications ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, Lippert (LCI), and
Moves your trailer's leaf springs to the top of your axle. Works with 3" diameter axles and double-eye leaf springs only.Features: Allows moving leaf trailer springs to top of axle For use with double-eye springs only Fits 3" axle Sleeve bolts allow the setup to install level Includes: (2) Spring Seats (8
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease ... 6,000-lb E-Z Lube trailer axles with #42 spindles Drum dimensions: 12" diameter x 2" wide Bolt pattern: 6 on 5-1/2" Grease cap flange diameter: 2.44" Wheel bolt diameter: 1/2" Weight
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. EZ-Lube spindles make it easy to ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in
Trailer axle measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting ... . After you've put on the grease caps and lug nuts (included), you'll be ready to roll. etrailer Axles etrailer axles are made of high-strength steel and come with spindles and spring seats welded
Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14.5" to 16" ... USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size
Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels ... : Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Mounting flange bolt hole
Round trailer axle beam measures 86-1/2" from hub face to hub face (when hubs - sold separately - are mounted) and 71-1/2" from spring center to spring center. E-Z Lube spindles make it ... taking apart the entire assembly. DextersDexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting ... . DextersDexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal ... are included Hub and drum are made in the USA Specs: Application: 5,200-lb E-Z Lube trailer axles with #42 agricultural spindles Drum dimensions: 12" diameter x 2" wide Works with 12"
Trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes complete electric brake assemblies, hubs, drums, bearings, races, seals, and ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in
Trailer axle measures 95" from hub face to hub face and 80" from spring center to spring center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting ... Features: Round axle beam acts as part of your trailer's suspension system Replace an axle on your trailer Fabricate a suspension to fit your application High-strength steel construction Bend in
Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels ... : Application: most standard Dexter hub-and-drum assemblies Does not work with Lippert 4,400-lb axles due to clearance issues with the brake mounting flange Dimensions: 10" diameter x 2-1/4" wide
Filters
