Rust-resistant steel wheel chocks help stabilize an ATV, UTV, car, or truck that's tied down in your truck bed or trailer. The E track fittings allow you to easily move the chocks to different anchor slots on horizontal E track.Features: E track wheel chocks help stabilize a vehicle that's tied down in your truck bed or trailer Work great for race cars, hot rods, ATVs, UTVs, and more Pair perfectly with E track tie-down straps (sold separately) Movable chocks can be installed anywhere along horizontal E track (sold separately) Pull spring-loaded lever to quickly secure chock to E track anchor slot Remove and reinstall chock as needed Durable steel construction Yellow powder coat finish is corrosion resistant Specs: Quantity: 2 wheel chocks Overall dimensions (per chock): 8-1/2" long x 6-3/8" wide x 4-1/2" tall 90-Day warranty E-Chocks help stabilize race cars, hot rods, ATVs, UTVs, and other wheeled equipment that's tied down in your truck bed or trailer.
Rust-resistant steel wheel chock helps stabilize 1 wheel of an ATV, UTV, car, or truck that's tied down in your truck bed or trailer. The E track fitting allows you to easily move the chock to different anchor slots on horizontal E track.Features: E track wheel chock helps stabilize 1 wheel of a vehicle that's tied down in your truck bed or trailer Works great for race cars, hot rods, ATVs, UTVs, and more Pairs perfectly with E track tie-down straps (sold separately) Movable chock can be installed anywhere along horizontal E track (sold separately) Pull spring-loaded lever to quickly secure chock to E track anchor slot Remove and reinstall chock as needed Durable steel construction Yellow powder coat finish is corrosion resistant Specs: Quantity: 1 wheel chock Overall dimensions: 8-1/2" long x 6-3/8" wide x 4-1/2" tall 90-Day warranty The E-Chock helps stabilize race cars, hot rods, ATVs, UTVs, and other wheeled equipment that's tied down in your truck bed or trailer.
Easily and securely store or transport your motorcycle with this adjustable chock. Pivoting bracket lets you roll bike into place and then cradles its tire for more stability than with standard chocks. Bolts onto the floor of your shop or trailer.Features: Wheel chock helps stabilize your motorcycle or dirt bike for storage or transport Pivoting bracket makes loading and unloading your bike a snap Rotates up and locks in place to cradle tire when motorcycle is rolled into chock Provides more stability than with standard, tubular chocks by ensuring 2 points of contact with your tire Adjustable design with 4-position bracket fits different tire sizes Move bracket forward or backward on base to accommodate large or small wheels Adjusts in 1-1/2" increments Sturdy steel construction Corrosion-resistant powder coat finish Simple bolt-on installation - attach to floor of trailer, shop, or anywhere else you want to use it Mounting hardware not included Specs: Application: Tire width: 3-1/8" to 7-1/8" Wheel diameter: 17" to 21" Overall dimensions: 16" long x 23-1/2" wide x 13" tall Mounting hole spacing (center to center): 6-5/16" long x 14-7/16" wide
Tie-down kit has 4 ratcheting tire straps and 2 moveable wheel chocks for securing your wheeled equipment to your truck bed or trailer. The roller idlers allow you to move the ratchets away from the vehicle so it is easier to tighten down the straps.This tie-down kit helps stabilize and secure race cars, hot rods, ATVs, UTVs, and other wheeled equipment that's tied down in your truck bed or trailer. It includes 4 ratcheting straps with roller idlers and 2 wheel chocks that easily clip into horizontal E Track (sold separately). Moveable E-Chocks This kit comes with 2 E-Chocks. Unlike other wheel chocks that have to be permanently installed, these chocks can be quickly and easily moved to different anchor slots on E Track.
The EZ Jack is an easy-to-use, safe and reliable device that functions as a jack for changing tires on dual-axle trailers. It also serves as a wheel chock or a level. It supports up to 20,000 lbs yet weighs just 11 lbs for easy handling and storage.Features: Enables you to easily change a tire on your tandem-axle trailer Heavy-duty, crescent-shaped wedge with rocker design raises trailer off the ground Serves as a wheel chock to help keep your trailer in place on inclines and most surfaces Flip over and place narrow end in front of wheel Levels out your RV when it is parked on uneven terrain Drive up onto wedge to balance out your motor home Constructed of heavy-duty, corrosion-resistant cast aluminum Made in the USA Specs: Weight capacity: 20,000 lbs Dimensions: 24" long x 6-1/8" wide x 6" tall Weight: 11 lbs Lifetime warranty The Blaylock EZ trailer jack and wheel chock makes it easy to change or service a tire on your dual-axle trailer.
Corrosion-resistant chrome-plated steel chock helps keep the front wheel of your motorcycle stabilized in your truck bed or trailer. Included quick-release hardware makes it easy to remove and reinstall as needed. ... Features: Wheel chock helps stabilize the front wheel of your motorcycle when it's tied down in your truck bed or trailer Triple-chrome-plated steel tubing is long-lasting and corrosion resistant Quick-release mounting hardware makes it easy to remove and reinstall as needed Slotted plates let you slide chock on and off of mounting surface to free up space when it's not in use Simple installation with included hardware Specs: Fits: tires up to 6" wide Overall dimensions: 11-3/4" long x 8-1/4" wide x 8-1/2" tall Mounting plate dimensions: 2" diameter x 1/4" thick Mount hole spacing (center to center): 1-1/4" Quantity: 1 wheel chock
The Kenda Karrier ST225/75R15 Radial Trailer Tire - Load Range E #AM10303 would work just fine to replace the Westlake ST235/75R15 tires currently on your trailer but will be about 1/2" narrower and shorter. The #AM10303 has a load rating of…
You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
Different manufacturers sometimes have different philosophies about the set-up process of a weight distribution system on a vehicle with factory air shocks. I can share with you the process we have found to work well for us when setting up a weight…
The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
The RhinoEXTREME RV Sewer Hose w/ Swivel Fittings #CAM39861 referenced in your question is essentially an upgraded version of the RhinoFLEX hoses, such as #CAM39761. The primary difference is that the RhinoEXTREME features a thicker sidewall that…
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…
The Replacement Caster Wheel for Ultra-Fab Manual 2" Trailer Jack - Qty 1 #UF49-954035 will fit an inner tube diameter of 1-3/4 inches. This will be the best fit for your inner tube with 1-5/8 inch diameter. The Removable Wheel for…
The Dutton-Lainson A-Frame Trailer Jack #DL22530 is currently our only manual A-Frame tongue jack with a 2" outer tube. The Lippert Quick Drop Tongue Jack #LC733926 that supersedes your 423192 jack along with our other jacks have all gone to the…
The inner lip of the Snap Pad Jack Pad for Camper Jacks w/ 5-1/2" Round Feet #SN97FR that grips onto the jack foot has a 5-1/8" measurement from one edge to the other so you'd have a bit more than 1/8" of the lip covering the jack…
That is a good question, and you will need to use three backing plates for each 5 foot section of e-track, so the exact part you will need is the following: - etrailer E-Track Backing Plates w/ Hardware - Qty 3 #e46RR These will fit perfectly with…
... The ratchet straps have E track fittings that clip into the anchor slots on the wheel chocks. Includes wheel chocks and straps for 4 wheels. Fits 10" - 30" tires.This tie-down kit for ATVs is easy to install and use. The wheel chocks are permanently bolted onto the bed of your trailer. To load your ATV or lawn mower, drive over the chocks so that the rear wheels are wedged between them.
Tie-down kit has 2 ratcheting tire straps and 2 moveable wheel chocks for securing your wheeled equipment to your truck bed or trailer. The roller idlers allow you to move the ratchets away from the vehicle so it is easier to tighten down the straps.This tie-down kit helps stabilize and secure ATVs, UTVs, lawn mowers, and other wheeled equipment that's tied down in your truck bed or trailer. It includes 2 ratcheting straps with roller idlers and 2 wheel chocks that easily clip into horizontal E Track (sold separately). Moveable E-Chocks This kit comes with 2 E-Chocks. Unlike other wheel chocks that have to be permanently installed, these chocks can be quickly and easily moved to different anchor slots on E Track.
Keep your tandem-axle trailer firmly in place with these easy-to-use wheel chocks. Drop a chock into place between your tires and step down on the center to flatten out the arms, pressing the wedges into the opposing tires to hold them in place.Features: Wheel chocks minimize give between tandem-axle tires to help prevent rocking and rolling while trailer is parked Quick, simple mounting and removal Place folded chock between tandem tires Step down on center so that arms flatten out, firmly pressing wedges into both tires Pull cable handle up to release and remove Adjustable length fits many applications Arms can be repositioned along the outer wedges Overall length can be adjusted by moving the pin and clip that hold the arms together Lockable to deter theft - padlock sold separately Durable steel construction Zinc plating on wheel wedges resists corrosion Clevis pin, cotter pin, and hex key included Specs: Quantity: 2 chocks Application: tandem-axle trailers Adjustable length: Minimum length: 16" Maximum length: 30" Limited 1-year warranty Easily eliminate the annoying rocking of your tandem-axle trailer or motor home with the ONEstep XL wheel chock.
This leveling kit contains everything you need to stabilize your trailer or RV at home or the campsite. Convenient storage bag included to keep your kit components secure and easy to find when they're not in use.Features: Comprehensive kit easily levels your trailer or RV Includes 2 levelers, 2 wheel chocks, 2 anti-slip mats, and a storage bag Compact levelers help your trailer stay flat Adjust to any height between 1/2" - 4" Works with tires sizes up to 32" Rubber pads provide extra grip on smooth surfaces Heavy-duty rubber wheel chocks keep your trailer from rolling when it's parked and leveled Storage bag keeps all kit components secure and easy to find when not in use Made in the USA Specs: Weight capacity: trailers up to 30,000 lbs Limited lifetime warranty
Pulling onto an uneven site can leave one side low with no easy way to fine-tune height. These curved levelers raise the tire gradually as you roll onto them, letting you stop exactly where level lines up.Highlights Gradual Tire Lift for Leveling: Curved ramp raises the tire in stages so you can stop at the right height. Complete Leveling Kit Included: Comes with 2 levelers, 2 chocks, 2 anti-slip pads, and 1 carry bag. Holds Position on Uneven Ground: Anti-slip pads and chocks keep the setup from shifting under load.
Keep your trailer in place with these solid rubber wheel chocks. Trailer frame mounting brackets keep dirty wheel chocks outside of your vehicle. Built-in handle makes positioning and removing fast and easy. ... Features: Wheel chocks help keep your trailer from rocking and rolling when it's parked Ridged bottom surface prevents slippage and movement Trailer frame mounting brackets allow you to store chocks outside of the vehicle Prevents dirt inside your truck or RV Snap-ring clips with wire lanyard store chocks and prevent lost pieces Large handles provide easy carrying and use Heavy-duty rubber and steel construction is weather-resistant and provides long-lasting durability Trailer frame mounting brackets and self-tapping screws included Specs: Dimensions: 7" long x 4" wide x 5-1/2" tall Limited lifetime warranty
Extended handle on wheel chock lets you quickly pull it out when it's time to leave. The ridged sides allow for an extra-strong grip on the wheel to help prevent your RV or trailer from moving while it's parked or being serviced.Features: Heavy-duty wheel chock helps keep your trailer or RV from rocking and rolling when it's parked Also great for industrial, construction, or agricultural equipment Ridged sides provide extra grip on tire tread to limit movement Extended handle lets you easily pull chock out when you're ready to hit the road Attach a rope or chain for even easier retrieval Use it to hang chock in your garage or shed for storage Durable, dense rubber construction won't deform over time Resists oil, water, and salt to provide years of use Black color helps hide dirt Specs: Overall chock dimensions: 10" long x 8" wide x 5" tall Handle dimensions: 4-1/2" long x 1-3/4" wide x 3/8" thick wire Quantity: 1 wheel chock 1-Year warranty
Designed for motorcycle and dirt bike tires that are 2" to 6" wide, this chock clips right into the E-track in your trailer. Position the chock at 45 degrees to the left or right, or at 90 degrees - whatever works best for your setup.Features: Easy to Mount: Chock snaps into the E-track already installed in your trailer Works best when clipped in around 14-1/2" from the floor Load Multiple Motorcycles: Angle chock at 45 degrees to the left or right, or 90 degrees - add more chocks so you can fit multiple bikes into a small space Great for Dirt Bikes: Chock fits bike tires 2" to 6" wide, covering dirt bikes and smaller motorcycles Made in the USA
... High-impact polyurethane resists damage and is treaded for maximum grip. Ramps, chocks, and jack pads nest together for compact storage.Features: Comprehensive kit easily levels your trailer or RV Includes 2 levelers, 2 wheel chocks, and 4 jack pads Compact levelers help your trailer stay flat on any surface Adjust to any height up to 4-1/2" Works with tires sizes up to 32" wide Ribbed bottom keeps ramps firmly in place on the ground Treaded surface grips your tire for added stability Heavy-duty wheel chocks keep your trailer from rolling when it's parked and leveled Drainage holes prevent water buildup from reducing traction Jack pads serve as stabilizing cushions so the leveling system won't sink into the ground Connectable design allows the system to nest together for compact storage High-impact polyurethane holds up under tremendous weight Resists scuffs and abrasions Specs: Quantity: 2 leveling ramps, 2 wheel chocks, and 4 jack pads Ramp dimensions: 16-9/16" long x 14-9/16" wide x 4-1/2" tall System weight: 9.9 lbs 1-Year warranty
Wheel chock helps to stabilize your motorcycle, dirt bike, or other small vehicle for transport. It can quickly be removed from its base for versatility and will accept wheels up to 6-1/2" wide.Features: Wheel chock helps to stabilize your motorcycle, dirt bike or other small vehicle for transport Chock removes to free up space when not in use Xtremewear hammered paint finish protects the chock from abuse Tubular construction creates a strong, durable system Simple bolt-on installation - attach to floor of trailer, shop or anywhere else you want to use it Mounting hardware not included Specs: Measures 8-9/16" from base to top of chock Fits tires up to 6-1/2" wide
Keep your tandem-axle trailer firmly in place with this easy-to-use wheel chock. Drop the chock into place between your tires and step down on the center to flatten out the arms, pressing the wedges into the opposing tires to hold them in place.Remove the lock (if applicable), and then tug the cable handle upward. The arms will release, and the chock will collapse so that you can easily remove it from between your tires.
Designed for tandem-axle trailers with up to 9-1/2" wheel spacing, this wheel chock will rid your rig of rocking by stabilizing your trailer or RV. Place the chock between tandem tires and expand it until the give is gone.Features: Wheel chock eliminates give between tandem-axle tires to prevent rocking when parked Ergonomic turning mechanism makes it easy to expand unit for an exact fit Works horizontally or vertically as needed to fit your tires Padlock (sold separately) locks chock in place to deter theft Heavily reinforced plastic composite is durable Includes 1 wheel chock, 4 extensions plates, and 1 locking cap Specs: Application: dual-axle trailers and RVs Wheel spacing: 3-1/2" - 9-1/2" 3-Year warranty
... Thick rope keeps set together and allows you to pull the chocks out easily.Features: Heavy-duty wheel chocks help keep your trailer or RV from rocking and rolling when it's parked 2 Chocks allow you to place one on either side of your wheel to help limit movement Also great for industrial, construction, or agricultural equipment Rope tethers chocks together and lets you quickly pull them out when you're ready to hit the road Tug on rope to pull chocks out from beneath your wheels Use it to hang chocks in your garage or shed for storage Durable, dense composite construction won't deteriorate or rot Resists oil, water, and salt to provide years of use Yellow color is highly visible so you can find them easily Made in the USA Specs: Chock dimensions: 9-1/2" long x 6" wide x 3-7/8" tall Rope length: 32-3/4" Quantity: 2 wheel chocks 1-Year warranty
... Recessed eyebolt lets you attach a rope or chain so you can quickly pull the chock out when it's time to leave.Features: Heavy-duty wheel chock helps keep your trailer or RV from rocking and rolling when it's parked Also great for industrial, construction, or agricultural equipment Ridged sides provide extra grip on tire tread to limit movement Grooved base creates friction with the ground to help keep chock from moving out of place Recessed eyebolt lets you attach rope or chain (not included) so you can quickly pull chock out when you're ready to hit the road Durable, dense rubber construction won't deform over time Resists oil, water, and salt to provide years of use Black color helps hide dirt Specs: Overall dimensions: 9-1/2" long x 7-1/2" wide x 6" tall Eye bolt inner diameter: 3/4" Weight: 7 lbs Quantity: 1 wheel chock 1-Year warranty
... Nylon rope keeps set together and allows you to pull the durable, rubber chocks out easily.Features: Mini wheel chocks help keep your ATV or UTV from rocking and rolling when it's parked 2 Chocks allow you to place one on either side of your wheel to help limit movement Ridged design on sides provide extra grip on tire tread to limit movement Nylon rope tethers chocks together and lets you quickly pull them out when you're ready to hit the road Tug on rope to pull chocks out from beneath your wheels Use it to hang chocks in your garage or shed for storage Durable, dense rubber construction won't deform over time Resists oil, water, and salt to provide years of use Black color helps hide dirt Made in the USA Specs: Chock dimensions: 5" long x 3" wide x 2-1/4" tall Rope length: 3' Quantity: 2 wheel chocks 1-Year warranty
Lightweight but durable wheel chock fits snugly under the wheel to help keep your RV or trailer in place while it's being serviced or parked. Corrosion-resistant chock has teeth on the base for added grip and stability in snow, ice, or mud.Features: Wheel chock helps keep your trailer or RV from rocking and rolling when it's parked Also great for industrial, construction, or agricultural equipment Contoured shape fits the slope of your wheel to better limit movement Rugged teeth on base create strong grip in snow, ice, or mud Reinforced gussets at the back provide strength and stability Cutout handle on top makes it easy to grab and retrieve Durable aluminum construction is lightweight and naturally corrosion resistant Made in the USA Specs: Overall dimensions: 15" long x 8-1/2" wide x 8-1/4" tall Quantity: 1 wheel chock 1-Year warranty
These 8-1/8" long x 6" wide x 4-5/8" tall wheel chocks are great for keeping your parked lawn mower's wheels from rolling or for securing grounded tires when your vehicle is up on ramps. ... Features: Wheel chocks help to keep your lawn mower or other all-terrain vehicle in place, even on inclines Also help secure grounded tires when using vehicle ramps Serated teeth along bottom rim firmly grip into the ground Treaded surface grips your tires for added stability Strong and durable polypropylene construction won't rust or corrode Nestable design - chocks fit inside of each other for compact storage Made in the USA Specs: Application: 20" wheels or smaller Dimensions: 8-1/8" long x 6" wide x 4-5/8" tall Quantity: 2 wheel chocks Note: Use these chocks on flat surfaces only.
Handle lets you attach a rope or chain to the wheel chock for easy retrieval. The ridged sides provide extra grip on the wheel to help prevent your RV or trailer from moving while it's parked or being serviced.Features: Heavy-duty wheel chock helps keep your trailer or RV from rocking and rolling when it's parked Also great for industrial, construction, or agricultural equipment Ridged sides provide extra grip on tire tread to limit movement Grooved base creates friction with the ground to help keep chock from moving out of place U-shaped handle lets you pull chock out when you're ready to hit the road Attach a rope or chain for even easier retrieval Use it to hang chock in your garage or shed for storage Durable, dense rubber construction won't deform over time Resists oil, water, and salt to provide years of use Black color helps hide dirt Specs: Overall chock dimensions: 10" long x 8-1/4" wide x 6" tall Handle dimensions: 3-1/2" long x 4" tall x 1/4" thick wire Quantity: 1 wheel chock 1-Year warranty
Filters
