Chock-N-Lock Wheel Stabilizer for Tandem-Axle Trailers and RVs - Qty 1

Video Transcript for Review of InfiniteRule Wheel Chocks - Wheel Chock - Wheel Stabilizer - IR55FR

Hello, neighbors. Steven here with etrailer.com. Let's take a look together at our Chock-N-Lock wheel stabilizer for your tandem axle trailers and RVs. Now, folks, this will be a perfect option for wheel chocking to eliminate the give between the tandem axle tires when you're parked. It's gonna prevent rocking and those kind of things. And the way this particular one works, it has a nice ergonomic turning wheel here built into it to help you just expand it or retract it as needed.

Now, this technically could work horizontally or vertically as needed to fit your tires. Most often, though, it's gonna look something like this. But, again, you could put it sideways like that. Totally up to you and your needs. Now, this does fit a wheel spacing width of 3 1/2 to 9 1/2 inches and it only works with dual axle trailers as far as meaning dual or triple or quadruple technically.

You need more than one axle basically, and this will work just fine for you. Now, getting into it, you're gonna get four of these expansion pads. You can get replacement pads sold separately if you need if in the future, if you lose them or something. But, basically, these are stackable, really simple to use, and you can simply pop them into the side here just like that. And if you need to use a couple of them or something of that nature, you could do that.

You can adjust them to fit your particular needs as far as that goes. So, I'm gonna go ahead and stick them all on here and we'll give you a quick demo. So, this guy here is basically just the retainer block as I'm calling it. Like I said before, you've got all these holes in the dial. You can lock that.

I'll show that here in a second. But I want you to watch, this is gonna spread out as I simply, little effort, not much needed, I can simply spread this out. And then once it hits the tires, obviously it's gonna tighten up. Let's say it was there and it was tight, then you would have to put this guy on, and, sold separately, you're gonna need a padlock of some sort. Now, we offer this Master Lock with a 3/16 shackle, part number 131D. And basically you just put that padlock, or, again, if you already have one that fits, simply padlock that in place. Keep in mind this will be pressed against the tire, so it's not gonna fall. And then that's how you keep people from, one, theft or keep this from turning. Now it's locked in place. You don't have to worry about it going anywhere. So, very neat design, very simple functionality. Simply unlock it and then you would take your plate off, and then in this case, you'd be loosening it up. So, again, minimal effort. You can see it spins really, really easy. And then once you've got it, you can put everything away in place for storage however you want to do it. So, again, a nice little Chock-N-Lock wheel stabilizer for tandem axle trailers. I'm Steven. Thanks for watching.