Video Transcript for Let’s Check Out the Flint Hill Goods Adjustable Wheel Chock

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Flint Hill Goods Adjustable Motorcycle Wheel Chock. We're up to seven and one eight inch wide tires. Now this adjustable wheel chock will help stabilize your motorcycle or dirt bike for storage or transport. Basically, one person can safely and easily secure the motorcycle without it tipping over. It has a very simple bolt on installation.

You can attach it to the floor of your trailer, your shop, or anywhere else you want to use it. Has this mounting bracket right here on it. Now, the mounting hardware to install this is not included. You would have to supply that. But if you notice on the front here, it has this pivoting bracket and this pivoting bracket makes loading and unloading your bike a snap.

Basically what happens, right now, it's in the open position so when you go to push, pull your bike into here it'll rotate onto that pivoting bracket and when it drops down into place your tire falls into here, locks it into place, and it'll cradle the tire when the motorcycle's rolled into the chock. With it in this position, it'll provide more stability on some of the standard tubular chocks because you're giving it two points of contact on the tire. One here and one right over here. So it'll hold it into place. And if you notice on this, this pivoting bracket here has four different positions you can bolt it in.

So those four position will help you fit different tire sizes. Basically, you can unscrew it on each side, move this, I have it in the most forward position now, which you can bolt it into any one of those positions. Makes it easy to accommodate any large or small wheels. The wheel diameter, this'll fit is anywhere from 17 inch up to 21 inch. Those adjustment holes, if you notice, if you measure 'em center to center, between each of 'em, they're one and a half inches.

So it'll adjust in one and a half inch increments. And the tire width that'll fit in this chock is anywhere from a minimum of three and one eight inches up to seven and one eight inches. This is a nice sturdy steel construction. Has a nice corrosion resistant black powder coat finish to it. And the last thing we wanna do is just give you some overall dimensions on this. We're gonna measure the length of it, and as I mentioned this cradle's in the furthest forward position it would be. So if I put it in this position and we measure from here to here, it's gonna measure a total of 26 inches long. The width on this, the widest point, is gonna be right up here. So if we take a tape measure and we go the widest point is gonna put you right about 10 inches wide. Now if we include the mounting bracket down here it's gonna put you at about 23 inches wide. And the overall height is gonna be from the bottom here to the very top here as the tallest position. So if we put a ruler on that you can see it's gonna be right about 10 inches, or I'm sorry, 13 inches tall. But that's gonna do it for the review on the Flinch Hill Goods Adjustable Motorcycle Wheel Chock for up to seven and one eight inch wide tires.