The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels., including Dexter, Lippert (LCI), and AL-KO Dimensions: 12" diameter x 2" wide Mountingflange bolt pattern: 5 bolt Wheel size: 14-1/2", 15", 16", and 16-1/2" Axle rating: 5,200
Replacement #84 E-Z Lube spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Grease zerk makes greasing easy. Flange lets you attach a brake ... Features: Tapered spindle replaces a worn or damaged #84 E-Z Lube spindle on your trailer Can also be used to build a custom axle Integrated zerk makes greasing your bearings easy Mountingflange
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" to 12" wheels. seats welded to underside of axle for mounting leaf springs (sold separately) Low ride height makes it easier to load and unload your trailer Straight, Easy Grease spindles - no drop Patented welding
5-5/8" Waterproof LED light displays brake, tail, and turn signals on your trailer. It mounts to the surface of your trailer with the built-in flange that doubles as a reflector and hardwires ... with red lens More efficient and durable than incandescent bulbs Polycarbonate lens and housing Surface mount with built-in flange Hardware not included 3-Wire pigtail hardwires to trailer FMVSS
BrakeMountingFlange Works with 7" brake assemblies (2,000 lbs. axles) Center Hole I.D.: 1.64" Hole Spacing: 2-7/8" center to center 4-Bolt Use with 1-3/4" round axles, that use
Hi Hayden; that bolt pattern is really uncommon but I believe it can be found on some really old Airstream trailers. There are no modern replacements that will match. The best option is to replace the hub with one that has a common bolt pattern like…
In order to determine if hub assembly 8-258-50UC1-EZ will work for you, first know that this assembly is for EZ Lube spindles that require a grease seal with a 1-1/2" inner diameter such as #RG06-020. You are also going to want to remove the hub…
Since a 2x6 board is about 1-1/2 inches thick, I don't think using 1-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood #TFX150ACQ is going to provide sufficient contact with the trailer frame. For that reason I recommend…
Are there any visible signs of wear on the magnets like exposed windings then that would indicate they need replacing. Magnets can go bad without showing visible signs of wear though. To see how to troubleshoot them check out the help article I…
Absolutely, in order to install a 5 bolt brake mounting flange, you will need the Brake Mounting Flange for 3" Round Axle part #4-44-1. This brake flange bracket is designed to work with an axle diameter of 3". If your axle is smaller than…
Thank you for all of the information and photos - it really helps give me a good idea of what you have/need. The parts that you asked about are listed below but I will say you may need a new axle as well if the location where the current leaf springs…
Capacity is what will have the capacity as opposed to the spindle, and the correct brake mounting flange will depend on the diameter of your axle. Since you mentioned a 3,500 lbs I assume that is your axle's capacity and typically those have…
Buongiorno! We do carry Replacement Magnet Kit for 7" Electric Trailer Brake Assemblies - 2,000 lbs Item #AKBRKR-M7. However, it looks like the center mounting hole on yours is round, whereas ours uses a square/rectangular hole. It doesn't…
I may have an option that works for your trailer, but we do not currently offer a 2000lb axle that measures 53" from spring center to spring center. You can have the current spring seats removed and new ones welded in the correct space for your…
So the short answer is no, there is nothing you can do to your current mounting plate to make another braking assembly fit your current setup. What you have is pretty unique, and when the team and myself took a look at it we were all in agreement…
What you will want to do is purchase the part #4-34 as this is a brake mounting flange designed for 2.2k axles, provided your axle is a 1-3/4" round tube. The brake mounting flange needs to be welded on perfectly square and concentric and if it…
We can definitely get you all the parts needed to add brakes to your trailer, but it is going to be an extensive list since there currently isn't anything on the axle. I did include an article regarding just this kind of situation, but lets get…
Brakemountingflange has a 2-3/4" diameter pilot hole and a 4 on 4-13/16" bolt pattern. Durable steel plate is 1/4" thick.Features: Brakeflangemounts onto end of trailer axle to provide secure attachment point for brake assembly Sturdy steel construction Weld-on installation Made in the USA Specs: Bolt pattern: 4 on
Trailer BrakeMountingFlange for 3-1/2" Round Axles Inside diameter: 3" 4 mounting holes Brakemountflange gets welded to the end of the axle to provide a secure mounting place for brake
Brakemountingflange has a 3" diameter pilot hole and a 4 on 4-13/16" bolt pattern. Durable steel plate is 1/4" thick.Features: Brakeflangemounts onto end of trailer axle to provide secure attachment point for brake assembly Sturdy steel construction Weld-on installation Made in the USA Specs: Bolt pattern: 4 on
inner diameter: 2-3/4" Weld-on design Brakemountflange gets welded to the spindle at the end of the axle to provide a secure mounting place for brake assemblies
Trailer BrakeMountingFlange - gets welded to the end of the axle beam to support the brake assembly.Features: For Use with 10" Brake Assembly Center hole diameter: 2.27" 4 Bolt Holes are 2-7/8" a part (center to center) Flange thickness: 1/4" Brakemountflange gets welded to
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. Hardwires ... Trailer Light This light is a surface-mount, meaning it installs flat against the surface of the trailer instead of through a cutout. Use the built-in flange with mounting holes to secure the light. You can
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts to the surface of the trailer ... White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount with built-in flange Hardware not included 3-Wire pigtail hardwires into
4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts with the built-in flange and has a weathertight connector. and durable than incandescent bulbs Polycarbonate lens and housing Recessed mount with built-in black flange Hardware not included Weatherproof connector Requires adapter (AL45PWTB - sold separately) to
4-1/4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts in a cutout with the built-in flange and has a weathertight plug. and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting with built-in black flange Hardware not included Weatherproof connector Requires adapter (AL45PWTB - sold separately
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts with the built-in flange and ... White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Recessed mount with built-in flange Hardware not included 3-Prong plug connects to
With a smoke lens and black housing, this light blends into your black trailer or vehicle while making you more visible to other drivers. It's eye-catching, not an eyesore.Features: Turn, brake, and tail light Smoke lens with red LEDs Black polycarbonate housing Surface mount with built-in flange - Hardware not included Plug and play - PL-3 connector works with 3-prong
4" Waterproof light with a built-in reflector displays brake, tail, and turn signals on your trailer. Mounts in a cutout with the built-in flange and hardwires to the trailer with the pigtail ... is equally visible from the front and the side Polycarbonate housing and lens Recessed mounting with built-in flange Hardware not included 3-Wire pigtail harness hardwires to trailer DOT compliant
4-1/4" Waterproof light displays brake, tail, and turn signals on your trailer. It mounts in a cutout with the built-in flange and works with 3-prong plugs. and durable than incandescent bulbs Polycarbonate lens and housing Recessed mounting with built-in black flange Hardware not included PL-3 connector works with 3-prong plug (A45PB or A47PB - sold
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brake light. Mounts with built-in flange. Designed with ... White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with built-in flange Hardware not included Weatherproof connector Requires
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer ring is a tail light and the center is a turn signal and brake light. Mounts with built-in flange and works with ... White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and tinted acrylic lens Surface mount with built-in flange Hardware not included PL-3 connector works with
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts with the built-in flange ... White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Recessed mount with built-in flange Hardware not included Weatherproof connector Requires
This red GloLight is bright, easy to see, waterproof, and just looks cool. The outer band is a tail light and the center LEDs are a turn signal and brake light. Mounts with the built-in flange and ... White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate housing and acrylic lens Surface mount with built-in flange Hardware not included PL-3 connector works with
... mount with built-in flange. Accepts 2-prong plug. systems Mounts on surface of trailer with built-in flange - hardware not included Accepts industry-standard 2-prong PL-3 plug (A45CB or A49PB - both sold separately) DOT compliant Meets FMVSS 108
Filters
