4-1/4" Round. Waterproof trailer light serves 3 functions: brake, tail, and turn. Unlike other LED lights, this ONE Series light provides bright illumination using a single diode. Recessed mount with flange. Weathertight plug. Red lens.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
This light has a weathertight connection as pictured above (weathertight plug sold separately). This type of connection is designed to help block out moisture.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number StL003RFMB. This is the Optronics ONE LED trailer light. The round trailer light is going to serve three functions, providing your stop light, taillight and turn single light. It is going to feature a sonically sealed waterproof housing and lens unit. It is completely submersible. The ONE Series is going to provide bright light using a single diode unlike other LEDS that use a multi diode design. The ONE Series is one LED.
It's going to feature durable surface-mount technology when it comes to the construction of the LED circuit board. That's going to better withstand shock and vibration, and it's going to allow for improved heat distribution. Now, LEDs are going to make great replacements for incandescent lights. They're going to last longer. They're much more efficient. They burn brighter.
You don't have to worry about replacing the bulbs, and you don't have to worry about brittle filaments. It's going to feature the polycarbonate red lens and the polycarbonate black housing, very strong and durable. This is a recessed mount installation. It's got the built in mounting plans. It's going to contain three mounting holes. You're hardware is not included.
We take a measurement of the diameter of the recessed area from this point right here to this point right here. That's going to give us a measurement of about 4 1/2 inches. The depth of the recessed portion, measuring from the back of the flange to the back of the plug, is looking at about 1 13/16 of an inch. Now, the plug back here is going to feature a weather tight connection point on the back of the light. It does require an adapter, part number AL45PWTB that is sold separately, and it is required to work with the industry standard three-pronged plug. The light is Department of Transportation compliant. If we take a measurement of the diameter of the light face, basically just measuring that lens area, that's going to measure 4 1/4 of an inch.
Overall diameter, including the flange, you're looking at about 5 1/2 inches. Overall depth from the front of flange to the back of the plug, we're looking at about 2 inches deep. Now our mount holes are going to be separated on center apart from one another by 4 1/4 of an inch. That's going to be the same distance between each mounting hole, and those holes are going to give us a diameter of about 1/4 of an inch. Again, this light is going to contain one diode or one LED. The power draw at 12.8 volts for the stop and turn light is 0.25 amps and for the tail light is 0.007 amps. Optronics is going to put a lifetime warranty on the LED. We're going to go and hook it up to our external power-supply that way you can see what it looks like with power running to it. We'll take our plug and place it into the back portion here until it clicks into place. You can see here that it has the one LED. It sends out a nice consistent signal. This is going to be the tail light function. Then when we apply our breaks, you can see how that illuminates for a stronger signal output, and it's going to do the same thing when we activate our turn signal. That's going to do it for today's review of part number STL003RFMB.
Average Customer Rating: 4.8 out of 5 stars (506 Customer Reviews)
4-1/4" Round. Waterproof trailer light serves 3 functions: brake, tail, and turn. Unlike other LED lights, this ONE Series light provides bright illumination using a single diode. Recessed mount with flange. Weathertight plug. Red lens.I replaced my older lights with 4 of these LED units. Works great.
LED lights work great on my 73 CJ5. Have had them now for a year and no issues at all. Thanks etrailer.
I'm very happy with my purchase. It meets my expectations. Thanks. I'll be doing some more purchasing in the near future.
Review from a similar ONE in Trailer Lights
I couldn’t find anyone that had the tail light I needed for my trailer.after looking at every place I could find I finally looked on etrailer web site and found what I needed. I called and spoke with the representative to make sure it was the right one. The representative was very helpful and determined it was the right part. The part actually got delivered quite a bit faster than expected. Thank you
Review from a similar ONE in Trailer Lights
Product and service brilliant. One the big things in service have been sorted, eg. good product, value for money (not cheapest) delivered in good condition in a predicted timeframe, it's the little things like an email with tracking url that has ALL the information you need... WITHOUT HAVE TO TYPE IN A TRACKING NUMBER , NAME, ZIP ETC. And same with review, click on a url in an email and enter your comments with pictures .....SIMPLE. so many other companies just make these types of things too complicated and onerous for the customer to provide feedback. Also each person in the process is named! Brilliant, personal and just nice. I wish you guys were responsible for all of my transactions for all the things I buy online. Thank you to all of you at etrailer fantastic job.
Review from a similar ONE in Trailer Lights
Terrific upgrade in my opinion. The installation was pretty easy for me. The light is slightly smaller than the original and I have the corrugated sheet metal siding I did not experience any led hyper flash with this light. I was slightly concerned about this after seeing videos of people changing to led light bulbs on the tow vehicle. This light was plug and play. 4 stars because the manufacturer did not provide a wiring diagram :( I don’t feel you should guess what wire goes where. The least they could do is tell you what they (the manufacturer) wired for ground. In my case, the white was ground, same as my trailer wiring. However I needed to connect green to black to get my turn signal to work. Your situation may be different. Would I buy it again? At this time, yes. I’m hoping this light outlasts my usage of this travel trailer- which should be for many years.
Review from a similar ONE in Trailer Lights
Perfect match for my 2019 tracker pro 190. It took me five minutes to put it on and hook it up. It took longer to round up the tools to do the job.
Review from a similar ONE in Trailer Lights
These were a perfect fit on my 2018 Tracker Boat trailer. Had the same plug in receptacle and bolt pattern. Very pleased!
Review from a similar ONE in Trailer Lights
So, I rewired my trailer to not have any wiring connections underwater during a launch operation. To accomplish this, I placed the "etrailer" tail lights and brackets on existing guideposts, then using two "shielded electrical extension cords" I routed them from the tail lights to the trailer hitch plug-in connector.
Review from a similar ONE in Trailer Lights
So, I rewired my trailer to not have any wiring connections underwater during a launch operation. To accomplish this, I placed the "etrailer" tail lights and brackets on existing guideposts, then using two "shielded electrical extension cords" I routed them from the tail lights to the trailer hitch plug-in connector.
Review from a similar ONE in Trailer Lights
They work. Question is for how long? Submersible tail lights don't seem to last too many years.
Review from a similar ONE in Trailer Lights
So i have a 94 Jayco pop up that one of the tail lights got smashed. The company that made those lights is no longer around. After some searching on etrailer.com I decided on these LED lights. Price was right. My only real complaint is that these lights come with nothing. No screws, no instructions, no seals. So when I pulled my old lights and found that they had 4 wires and these lights had 3, time to do some research. None of the wire colors matched up. Not the trailer wires, not the old lights etc. On etrailer there is a video describing the lights in detail. Watch it. He goes over what color wire does what on the new light. I hooked the trailer up to the car to figure out the old lights wiring scheme. I was able to figure it out from there, though you cannot wire both sides up the same, if you do when you put the turn singles on they both flash. I had to leave the brake light wire disconnected on one side. Brake lights still work without it. I used plumbers putty to create a seal. That is also what they used on the originals and I used the original screws to make new holes and mount the lights. All in all it worked out but instructions would have been greatly appreciated!. I am sure etrailer would have jumped in to assist if I asked but it was not needed. Pictures posted. Old lights on bumper for reference.
Review from a similar ONE in Trailer Lights
So i have a 94 Jayco pop up that one of the tail lights got smashed. The company that made those lights is no longer around. After some searching on etrailer.com I decided on these LED lights. Price was right. My only real complaint is that these lights come with nothing. No screws, no instructions, no seals. So when I pulled my old lights and found that they had 4 wires and these lights had 3, time to do some research. None of the wire colors matched up. Not the trailer wires, not the old lights etc. On etrailer there is a video describing the lights in detail. Watch it. He goes over what color wire does what on the new light. I hooked the trailer up to the car to figure out the old lights wiring scheme. I was able to figure it out from there, though you cannot wire both sides up the same, if you do when you put the turn singles on they both flash. I had to leave the brake light wire disconnected on one side. Brake lights still work without it. I used plumbers putty to create a seal. That is also what they used on the originals and I used the original screws to make new holes and mount the lights. All in all it worked out but instructions would have been greatly appreciated!. I am sure etrailer would have jumped in to assist if I asked but it was not needed. Pictures posted. Old lights on bumper for reference.
Review from a similar ONE in Trailer Lights
Matches my stock taillight to bass tracker classic xl trailer. perfect match harness hooks right up.
Review from a similar ONE in Trailer Lights
These lights were an exact match to my previous lights. They were trouble free to install, though they could use a couple more inches of lead wire in my opinion. That wouldn't prevent me from buying them again. etrailer is among the best online retailers I've ever used. They provide the end user with lot's of product information as well as great installation instructions and videos. You know both what you're getting AND how to install it.
Review from a similar ONE in Trailer Lights
So simple to hookup! I smashed the driver side rear light when a tie-down snapped and my dirt bike fell on it. First day of a 2 week vacation. The next day I got online and ordered LED replacements for both side. I wasn't sure about how long it would take, and unfortunately etrailer doesn't provide any information about shipping times for the various options. I ordered it with USPS delivery to the house we are renting on a lake. I thought it might take 4 or 5 days. Boy was I surprised when I got an email for USPS saying they couldn't find my name or address and had sent it back. The name I could understand, but the address? I have received many packages at this address over the years. I even Googled it and it showed up just fine. The day before I received another package. SO no I was concerned that I couldn't get it in time to replace before we left for home. I discussed my problem with George. He checked the tracking info and confirmed the parts were on their way back, so he reordered and suggested we just use Ground. I mentioned to him that I was nervous about the time, and before I could call (to early in the morning) I had gone on another online retailer knowing they could deliver to this address. I was surprised to find the exact same pair of lights, both cheaper and free delivery. George said etrailer had a price matching program, and if I could send him the other online retailer info he would refund the difference. The parts arrived right about the time I was told, and it took me perhaps 30 minutes to rewire and test. Nice bright lights, much better than the original. Thank you once again etrailer, I love your company!
Review from a similar ONE in Trailer Lights
Easy installation. Have had this installed for just over a year, and it is still in good working order.
Review from a similar ONE in Trailer Lights
I ordered both the RVSTLB0060 and the RVSTLB0061. My only disappointment with the RVSTLB0061 was the LED module was not attached to the frame like the RVSTLB0060. Luckily, I had two small sheet metal screws I could use to secure the LED to the frame mount. My installation was on a 2016 Rockwood A212HW. The OEM lights were the Optronics incandescent version. RVSTLB0060/61 are direct replacements except for the odd (offset) drill pattern used during factory assembly (they did not use all the Optronic predrilled holes). OEM mounting screws were reused but I added a bead of glue to the threads to help secure over time. Note the factory uses a good bit of RTV silicon on the top portion of the light frame to help hold in place and fit the slight curve of the body.
Review from a similar ONE in Trailer Lights
Bought this a year ago to replace my regular lights. Much brighter than previous, and still working great! Being LED, bulb will last waaaay longer, and consume less power. In my testing for inside lights, LED bulbs use about 1/4 amp, compared to 1 amp for regular bulbs. I'd imagine the same will hold for these tail lights, or at least similar.
Review from a similar ONE in Trailer Lights
Works well. I don't understand why it was delivered in an open bag packed in box and it appeared it had been used when I assumed I was purchasing a new product. Also I order two fixtures, one with plate bracket with black base color and this one with a white base color.
Review from a similar ONE in Trailer Lights
Bought a year ago, and still working great! Lights are brighter than the regular bulb from previous. I did silicone caulk the license plate brackets in places that it broke for me previous. Am hoping this provides extra "structure" to fortify the strength of it.
Review from a similar ONE in Trailer Lights
Needed to replace trailer lights for my 2013 tracker 190. This lights fit perfect and have the same plug that was on the trailer. The L.E.D lights are a lot brighter than the old incandescent lights.
Review from a similar ONE in Trailer Lights
I just got a new tracker boat & trailer and I did not notice the taillight light was cracked (it still worked). This light cost more then most, but the quality is evident immediately and a perfect match from the old one. It was a 5 min. replacement.
Review from a similar ONE in Trailer Lights
LED light was a perfect fit and easy install. In attached photo LED is on right and incandescent on left in photo (daylight photo was darkened to show lights better). The photo doesn't show it clearly, but both my wife and I believe it is slightly brighter than the incandescent bulb. I have had some trouble in the past with the incandescent bulb not making contact. This should not be a problem with the LED bulb.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.