Automaticallylevel and stabilize your travel trailer with this electronic leveling system. 5 Precise, motorized jacks can be operated by the included control panel or via your smart device (if RV has Wi-Fi and factory-installed OneControl system).The Ground Control TT automatic electric trailer jack system provides the easiest, most efficient way to level your trailer. With automaticleveling, you don't need to go through the trial and error of referencing levels and manipulating jacks one at a time.
If your RV is already prepped for the Ground Control 3.0 system, this kit has everything you will need to automaticallylevel and stabilize it, without unneeded, duplicate components.AutomaticLeveling for Your 5th-Wheel RV The auto-level feature provides the easiest, most efficient way to level your rig. With automaticleveling, you don't need to go through the trial and error of referencing levels and manipulating jacks one at a time.
This propane regulator lets you connect the 2 propane tanks on your RV to maintain a constant gas pressure. It automatically switches to the full tank when the other is empty, and you can remove the empty cylinder without interrupting propane supply.Features: Dual propane tank regulator maintains consistent gas pressure from propane tanks flowing into your RV Automatic changeover switches flow to opposite tank after one depletes Built-in red/green gas gauge indicates when a cylinder is empty Remove and replace the empty tank without interrupting gas flow from the tank currently in use Specs: Inlet: 1/4" SAE inverted flare Outlet: 3/8" NPT female BTU per hour: Service Cylinder: 210,000 BTU/hr Reserve Cylinder: 130,000 BTU/hr Nominal outlet pressure: 11" 1-Year warranty The Camco Dual Propane Tank Regulator automatically switches to a full propane tank when the cylinder in service depletes.
This single-gauge, pneumatic, height-control valve, compressor and tank system works with your existing air springs to automatically maintain a single, user-set ride height. System levels two springs equally for off-road or loading applications.Features: Automatic, single-gauge height-control valve for air helper springs Inflates or deflates air springs automatically, as a pair Maintains a single, user-set ride height consistently, no matter the load size Ride height is adjustable to accommodate off-road, loading applications Integrates with existing air helper springs and included compressor and tank Attaches to vehicle axle to detect increase or reduction in ride height Heavy-duty air compressor Maximum psi 150 1/2-Gallon air tank (2) 1/4" NPT valves Extension hose for emergency tire inflation - 25' Specs: Application: Firestone air springs Kit can also be used with RV quad-gauge control panels Compressor amperage: 13 amps Cu ft/min at 60 psi: 0.92 Cu ft/min at 100 psi: 0.74 Air tank dimensions: 7.63" long x 6" diameter 2-Year limited warranty Note: The construction material of the fittings may vary.
Automaticallylevel and stabilize your fifth-wheel RV with this electronic leveling system. 4 Precise, motorized jacks can be operated by either the included touchpad. ... AutomaticLeveling for Your 5th-Wheel RV The auto-level feature provides the easiest, most efficient way to level your rig. With automaticleveling, you don't need to go through the trial and error of referencing levels and manipulating jacks one at a time.
Automaticallylevel and stabilize your fifth-wheel RV with this electronic leveling system. 6 Precise, motorized jacks can be operated by either the included touchpad or a Bluetooth compatible app on your smartphone.AutomaticLeveling for Your 5th-Wheel RV The auto-level feature provides the easiest, most efficient way to level your rig. With automaticleveling, you don't need to go through the trial and error of referencing levels and manipulating jacks one at a time.
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…
You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…
Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…
We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…
Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…
Replaces the control panel for your Lippert Components Ground Control 3.0 automaticleveling system (LC358590 or LC675817) or Ground Control TT automatic travel trailer leveling system (LC672136).Features: Replaces the control panel for your Lippert Components Ground Control 3.0 automaticleveling system (LC358590 or LC675817) Also works with Ground Control TT automatic travel trailer leveling system (LC672136) Quantity: 1 control panel
Replaces 1 rear left leg for your Lippert Ground Control 3.0 automaticleveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.Features: Replacement left rear leg for your Lippert Ground Control 3.0 electric leveling system (LC358590 or LC675817) Leg includes the mounting bracket needed for installation Snapper pin to attach footpad (LC225598) is sold separately Specs: Total lift: 12-1/2" Overall height: Retracted: 24-1/2" Extended: 36-3/4" Capacity: 5,000 lbs
Replaces a right-side, short, rear leg for your Lippert Ground Control 3.0 automatic 6-point leveling system (LC675817). Includes mounting plate and attached foot plate.Features: Replaces 1 right-side, short, rear leg for your Lippert Components Ground Control 3.0 electric 6-point leveling system (LC675817) Includes mounting plate and attached foot plate Specs: Total lift: 12-1/2" Overall height: Retracted: 22-1/2" Extended: 35" Capacity: 5,000 lbs
Automatic changeover regulator eliminates interruptions by automatically redirecting LP gas vapor flow from an empty cylinder to a full cylinder. ... Features: Automatic changeover regulator eliminates interruptions by automatically redirecting LP gas vapor flow from an empty cylinder to a full cylinder Indicator changes from green to red when cylinder needs to be filled 1/4" Inverted flare inlet x 3/8" FPT outlet connection Brass inlet adapters can be removed to use hoses with MPT fittings 345,000 BTU Zinc die cast Molded rubber diaphragms UL approved and 2nd stage relief mechanism per UL 144 Powder coated
Low-pressure 2-stage LP gas regulator ensures a continuous flow of gas to all appliances by combining a high-pressure first-stage and low-pressure second-stage regulator into one unit. Designed for RV applications.
Manually switching cords or breakers every time power changes gets old. This automatic transfer switch manages power between shore power and a generator, using a short delay to stabilize voltage before routing power to your RV without extra steps.Highlights Power Switching You Don't Have to Think About: Seamlessly and automatically routes power so your RV stays energized without manual switching. Made for Shore Power, Generators, and Backup Systems: Keeps power available for RV, solar, and off-grid setups.
Manually switching cords or breakers every time power changes gets old. This automatic transfer switch manages power between shore power and a generator, using a short delay to stabilize voltage before routing power to your RV without extra steps.Highlights Power Switching You Don't Have to Think About: Seamlessly and automatically routes power so your RV stays energized without manual switching. Made for Shore Power, Generators, and Backup Systems: Keeps power available for RV, solar, and off-grid setups.
Replaces the auto level double acting controller in your Lippert leveling system. Includes replacement controller for leveling operation.Features: Replaces the auto level double acting controller in your Lippert leveling system Includes replacement controller Supports automaticleveling system operation Fits: Lippert leveling systems
Replaces the semi-auto level controller in your Lippert leveling system. Includes replacement control box for leveling operation.Features: Replaces the semi-auto level controller in your Lippert leveling system Includes replacement control box Supports semi-automaticleveling system operation Fits: Lippert leveling systems
Pair of levelers help you achieve stability for your vehicle in uneven terrain. Large surface area keeps things stable and accommodates larger tires. ... Features: Levelers let you park your vehicle in uneven terrain Large surface area for increased stability Larger access for wider tires UV proof, stable HD PE material Storage bag included Black color Specs: Overall height: 5-3/4" Leveling heights: Tallest level: 4-1/2" Middle level: 3" Lowest level: 1-3/4" Dimensions: 22" long x 7-5/8" wide Weight capacity: 10,000 lbs Quantity: 2 levelers 2-Year warranty
Levelers help keep your RV flat while on uneven terrain. Included chocks support levelers. Anti-slip rubber mats keep leveler and chock in place. ... Features: Levelers help your RV stay flat when it is parked on uneven terrain Drive up onto wedges to balance out your motorhome Included chocks support levelers Anti-slip rubber mats keeps leveler and chock in place Curved edges allow for easy removal Compact size fits between your tires and allows easy storage when not in use Cross brace design is sturdy and long-lasting Made in the USA Specs: Quantity: 2 levelers, chocks, and mats Weight capacity: 30,000 lbs per leveler Lift: up to 4" Dimensions: 11" long x 7" wide x 4-1/4" tall 2-Year limited warranty
Replaces the powered A-frame jack for your Lippert Ground Control TT leveling system. 2 Toggle switches raise and lower your trailer tongue. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel.Features: Replaces the powered tongue jack for your Lippert Ground Control TT leveling system (LC672136) A-frame jack raises and lowers your trailer tongue for easy hookup Automatic extend and retract functions allow hands-free operation while jack lifts and lowers Hitch recognition automatically returns your trailer to the position at which you unhooked LED light illuminates at a downward angle to help you focus on your coupler Includes mounting plate and foot pad Specs: Bracket height: Retracted: 10-3/4" Extended: 28-3/4" Lift: 18" Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate diameter: 5-1/2" Motor voltage: 12 volts Power consumption: 30 amps Lift capacity: 3,500 lbs
... Wireless remote also lets you adjust your springs. Dual-path system levels 2 air springs independently or 2 pairs equally.Features: Compressor system lets you monitor and adjust your air springs Dual-path system levels 2 air springs independently or 2 pairs equally Bluetooth remote is rechargeable with 2 memory presets Wireless system can also connect directly to your smartphone for operation Adjust your air springs remotely using your smartphone User-friendly app lets you adjust and monitor your air springs Compatible with iPhone and Android smartphones Easily adjustable air pressure settings and functionality Extreme-duty air compressor with 150 max psi 2-Gallon air reservoir for faster inflation of air springs Electronic control unit (ECU) can be mounted anywhere Stands up to moisture, road chemicals, salt spray, and extreme temperatures Air line, wiring harness, and hardware included for installation Designed for use with Firestone air springs Assembled in the USA Specs: Maximum air pressure: 150 psi Amperage: 23 amps Duty cycle: 100 percent Flow rate: 0 - 30 psi: 7 seconds 0 - 60 psi: 18 seconds Cubic feet per minute at 100 psi: 0.94 Compressor dimensions: 11-1/4" long x 3-15/16" wide x 6-7/8" tall Compressor mounting dimensions: 8-5/16" long x 3-5/16" wide Air tank capacity: 2 gallons Air tank dimensions: 14-1/2" long x 8" tall x 7" diameter 2-Year limited warranty Notes: Because the air compressor in this system has a 100-percent duty cycle, if it is run for an extended period of time, the maximum air pressure rating will be reduced from 150 psi to 100 psi.
... Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.This puts more strain on your rear axle and reduces contact between your front tires and the road, causing problems with braking, steering control and traction. By adding air springs to your rear suspension, you can help to level your vehicle and improve braking and handling. The air springs also help to level your headlight beams and reduce wear on your tires.
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.LoadLifter's air bags are adjustable from 5 to 100 psi for precise support, and they can be inflated equally for front-to-back leveling or independently of one another for side-to-side leveling. The air springs are made of high-quality, 2-ply, fabric-reinforced rubber.
... Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.If the plow is off-center or has an extension, the springs will automatically compensate for this as well. Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall when loaded.
5,000-lb Capacity. LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of air springs and the comfort and reliability of jounce springs. Jounces also work as a fail-safe if air springs lose pressure.LoadLifter's air bags are adjustable from 5 to 100 psi for precise support, and they can be inflated equally for front-to-back leveling or independently of one another for side-to-side leveling. The air springs are made of high-quality, 2-ply, fabric-reinforced rubber.
2,000-lb Capacity. Level your vehicle when you're hauling a heavy load with these Ride Control air springs. The adjustable springs improve overall stability and ride quality, eliminate rear sag, and reduce strain on your factory suspension.Features: Provides your vehicle with up to 2,000 lbs of load-leveling support, reducing strain on your rear suspension and improving both safety and ride quality Designed for light-to-medium duty trucks, vans, and SUVs with leaf springs Keeps your vehicle level when you are hauling a heavy load Improves steering and braking performance Helps to maintain safe headlight aim Keeps your tires from wearing unevenly Lets you manually adjust air pressure to get the even load distribution and support that you need Level your vehicle front to rear Inflate each spring independently for side-to-side leveling of off-center loads Reduces the strain on your OEM suspension caused by extremely heavy loads Improves overall stability and ride quality Diminishes sway and absorbs road shock for a smooth ride Installs between your vehicle's frame and its leaf springs Manual inflation valves are typically mounted on bumper for easy access Includes 2 air springs, mounting brackets, hardware, alignment tool, tubing, and Schrader valves for manual inflation Add a compressor system with in-cab gauges (sold separately) to monitor and automatically adjust air pressure Made in USA Specs: Load-leveling capacity: up to 2,000 lbs Ride Control springs will not increase your vehicle's weight-carrying capacity.
Filters
