Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The DB-42 is an older style of UFP 3,500 lb axle disc brake components. The Kodiak kits like the part #K2HR35D will fit in replacement of that and would be an upgrade so this would be a great solution. It comes with everything you'd need to…
view full answer...Hey Brian, what pump setup are you using and are you sure that it's building pressure? Do you have a pump like the #ST93FR?
view full answer...You actually do not want the weight of the load on a trailer to balance perfectly on either side of the axle. You want more weight forward so that the trailer doesn't sway. What you'll want is 10-15 percent of the total trailer weight as…
view full answer...Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…
view full answer...Yes, the Rhino-Rack Nautic 581 item #RR581 will work with the Rhino-Rack Accessory Heavy-Duty Bars item #RR43120B but you will need longer bolts. They are the Heavy-Duty Crossbar Adapter Kit for Rhino-Rack Kayak Carrier item #HD-FK1.
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
view full answer...In order to find a local dealer for installation purposes, there is a way for you to input your location in order to find dealers close to you. That location for this information is right below the product images and videos. Underneath those…
view full answer...Some trailers are equipped with EZ Lube spindles, which have a grease fitting or zerk in the end of the spindle, and a small hole in the spindle that lets grease enter the interior of the hub and reach the bearings. This allows grease to be added to…
view full answer...In order to determine which hubs you're going to need as a replacement you will need to pull the hubs to see what bearings will fit on your spindle; the bolt pattern is only part of the equation, but still helpful to know. To accomplish this you…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.
view full answer...Hey Ivan, The replacement controller #FR48TD is only compatible with new units after 2024 with the R32 refrigerant. After 2024 all AC manufacturers switched to this new refrigerant making replacement parts not compatible with old units. That is the…
view full answer...Yes! The clamps that come with the Yakima BigCatch Kayak Roof Rack w/ Tie-Downs #Y04091 will fit perfectly around your 1-1/4" square crossbars.
view full answer...