LED Clearance or Side Marker Trailer Light - Submersible - 5 Diodes - Round - Red Lens
(15 reviews)
Price: $17.00
In Stock
LED Clearance or Side Marker Trailer Light - Submersible - 5 Diodes - Round - Red Lens
Item # MCL52RMB
Our Price: $17.00
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (15)
- Q & A (0)
- Videos (1)
- Photos
Optronics Trailer Lights - MCL52RMB
- Clearance Lights
- Round
- LED Light
- Red
- 2 Inch Diameter
- Surface Mount
- Rear Clearance
- Side Marker
- Submersible Lights
- Optronics
2-15/16" x 2-15/16" Round. Waterproof trailer light serves as either a side marker light or a clearance light. Durable polycarbonate housing and lens. Recessed mount with flange. Accepts 2-pin PL-10 plug. PC rated.
Features:
- Round trailer light can function as both a clearance light and a side marker light when properly mounted
- Sonically sealed, waterproof housing and lens unit is submersible
- Durable surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock, moisture and vibration
- Allows improved heat distribution and thinner construction
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Red lens over white LEDs
- Durable polycarbonate housing and acrylic lens
- Recessed mount with flange
- Weathertight connection accepts included 2-wire weathertight plug
- DOT compliant
- PC rated
Specs:
- Quantity: 1 clearance/marker light
- Dimensions: 2-15/16" tall x 2-15/16 wide x 15/16" deep
- Diodes: 5
- Power draw at 12.8 volts: 0.063 amps
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
PC-Rated Lights
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
Recessed-Mount Light
Recessed-mount trailer lights install underneath a housing. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
MCL52RMB Optronics LED Clearance or Side Marker Trailer Light - Submersible - 5 Diodes - Round - Flange Mount - Red Lens
California residents: click here
Video of LED Clearance or Side Marker Trailer Light - Submersible - 5 Diodes - Round - Red Lens
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Trailer Lights - Clearance Lights - MCL52RMB Review
Speaker 1: Today we're taking a look at a Two-inch Round LED Clearance/Side Marker Light. This sonically sealed, waterproof LED light functions as a marker and/or clearance light for your trailer.It's an LED system. LEDs make great replacements for incandescent lights. They last longer, they burn brighter, and they're more efficient. With LEDs you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments.The unit comes with the weather-tight connection plug, which is included. It connects to the appropriate connection points here on the back side of the light and then it offers a two-wire design.
So, the white wire's your ground. The black wire is your power wire.The unit features a red, polycarbonate lens and then a black housing that's very strong, very durable. Flange-mount design, so we have three mount holes. Mounting hardware not included. It is SAE and Department of Transportation compliant.
It's PC-rated.We're going to take a look at some of the measurements real quick and then we're going to hook it up to power, so you can see what it looks like with power running to it.The overall diameter of the unit measures about two and seven-eighths inches to two and fifteen-sixteenths inches. The lens area measures two inches and the area back here has a diameter measurement of two and three-sixteenths of an inch to two and a quarter.We're going to go and hook it up to power. Again, our white wire is our ground wire. And then our black wire is the power wire. This sends out a really nice, strong, consistent signal.
It's a very bright light. It's a five diode or five LED design, so the multi-diode design really helps optimize the overall light output.When it comes to the power draw at 12.8 volts, it's 0.063 amps. And Optronics puts a limited lifetime warrantee on the LEDs.That's going to do it for today's look at the Two-inch Round LED Clearance/Side Marker Light from Optronics.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Customer Reviews
LED Clearance or Side Marker Trailer Light - Submersible - 5 Diodes - Round - Red Lens - MCL52RMB
Average Customer Rating: 4.7 out of 5 stars (15 Customer Reviews)
2-15/16" x 2-15/16" Round. Waterproof trailer light serves as either a side marker light or a clearance light. Durable polycarbonate housing and lens. Recessed mount with flange. Accepts 2-pin PL-10 plug. PC rated.by: Dan 09/13/2022
Good descriptions on the parts I need so I know it’s gonna fit when I get it. Fast shipping and great service…
by: Ray04/23/2022
I use the LED trailer lights to replace some on my boat trailer and they were easy to disconnect and replace.
by: Jonathan 09/20/2021
Service from eTrailer is top notch. Communication from eTrailer is best in class and they shipped my order out super fast!
by: Robert 08/24/2022
Quick delivery and what I wanted!
Thanks for the service!
by: Lawrence 09/27/2022
by: Harlan 09/19/2022
by: Greg 08/25/2022
by: Jason08/24/2023
by: Charles 08/10/2022
Perfect
by: Timothy 07/08/2021
by: Eric 07/30/2022
by: Scott12/11/2021
by: Marty 04/05/2021
by: John 08/20/2021
by: Rodney 10/11/2021
15
15
See what our Experts say about this Optronics Trailer Lights
- How to Determine Correct Replacement Round Tail Light For TrailerThank you for the photo; and while we can tell you how to determine the correct replacement round, red tail light for your trailer, we don't have any way of knowing the exact light because unfortunately there isn't any type of list of replacement parts for trailers (the SAE number on that is not a part number, SAE stands for Society of Automotive Engineers and means it passed its standards test). So in order to determine this, however, you will simply need to measure your tail light and...
view full answer...
- LED Clearance or Side Marker Trailer Light in Red For a complete set in red we have the Optronics LED Clearance or Side Marker Trailer Light - Submersible - 5 Diodes - Round - Red Lens item # MCL52RMB. If you are wanting an exact set up like the Optronics Miro-Flex LED Clearance or Side Marker Light w/ Grommet and Pigtail - Submersible - 3 Diodes - Amber item # MCL51CAK you referenced you will need the following parts: LED Clearance or Side Marker Trailer Light - Submersible - 3 Diodes - Round - Clear Lens item # MCL57RCB Right Angle...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Installed by:
Cole B
Edited by:
Daron K
Written by:
Brian T
Updated by:
Manda E
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.