Result: timken

Hey Marcus, congrats on the new truck! Since your Silverado 3500 has the B&W Turnoverball item #BWGNRK1016, I recommend the B&W Companion item #BWRVK3500. This hitch has a 20,000 lbs capacity and will connect directly to the square gooseneck…

The difference between the Grease Seal 10-36 #10-36 and the 10-10 Grease or Oil Double-Lip Seals #RG06-090 is going to be the inner diameter. The #10-36 seal has an inner diameter of 2.250" while the #RG06-090 has a 2.125" inner diameter.…

It looks like your current brakes use the offset 4-bolt mounting pattern. Take a look at the picture I have included that shows the mounting pattern of Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange - 12" - Left/Right Hand Assemblies - 6K…

Usually hub and drum assemblies themselves don't have a right and a left; they can be used on either side. If your neighbor has hubs that indicate that one is a left and the other is the right then they should be installed in that orientation for…

Hey Scott! The correct bearing kit for your Dexter 6k axle is the Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal #BK3-100. If you want the Dexter version it is the #DX26ER. What kind of trailer do you have?

Hey Mark, Yes, the Timken bearings that we offer do come in anti-counterfeit boxes. I've attached a picture of the Timken Replacement Trailer Wheel Bearing - 25580 #TMK44FR that I took from our warehouse.

Hello Nick. The #TMK98ZR seal is made by Timken. It has a 2.250" ID and 3.376" OD .This is one in the same as the National 452920/482920 seal so they are interchangeable. A lot of folks prefer the Timken brand since they are made here in…

Hi Steve, Yes, we offer the 7-Piece Installation Set for Bearings, Races, and Seals #PTW83020, which you can use to drive in your grease seal #TMK98ZR. If you're ever in a pinch you can also use a block of wood that's longer than the inner…

Hey Paul, for your 2022 Grand Design Momentum 351MS you can use the Dexter Electric Trailer Brakes #23-180-181 for replacement brakes. These brakes will work with Dexter 7k axles, measures 12" x 2", and has a 5 bolt mounting flange.

The AL-KO brakes can have a few different mounting patterns, so I recommend measuring to double check. I included a picture of how the Dexter #23-458-459 will measure to compare as well. Odds are these are correct, but it never hurts to double check.…

The inner diameter of bearing #L44649 is 1.063 inches. The inner diameter of bearing #L68149 is 1.378 inches. Both fit on a #84 spindle. The matching race for bearing L44649 is #L44610. And the matching race for bearing L68149 is #L68111. These…

Andy, the Shock Absorber for Roadmaster Comfort Ride Trailer Suspension System #RM-204000-00 measures 11-1/2" long eye to eye compressed, 17-1/2" long eye to eye extended, and the eyelet holes are 12mm diameter.